0

Your Shopping Cart is empty.

  • MK8 Extruder Aluminum feeder Kit for 1.75mm/3mm filament
    • i i
    • images/l/Geeetech_20160302192325_1.jpg images/l/Geeetech_20160302192325_1.jpg
    • images/l/Geeetech_20160302192325_2.jpg images/l/Geeetech_20160302192325_2.jpg
    • images/l/Geeetech_20160302192325_3.jpg images/l/Geeetech_20160302192325_3.jpg
    • images/l/Geeetech_20160302192325_4.jpg images/l/Geeetech_20160302192325_4.jpg
MK8 Extruder Aluminum feeder Kit for 1.75mm/3mm filament
INFO

SKU:800-001-0449

Shipping Weight:100g

Free Shipping!

$11.99 Save: 33% off $7.99
Qty:
VS
VOTES

Vote for specials.

2 votes

Easy Print
33%

Please Choose:



This is an MK8 Extruder Aluminum feeder Kit for 1.75mm /3mm filament. (3mm is only available for short distance ). 

This kit is also available for both left and right hand direction, short-distance and long distance(with two push-in fittings),which gives you 6 options in total, please choose according to your requirement.

 

A . long distance extruder for 1.75mm(left hand)

B. Short distance extruder for 1.75mm (left hand)

C. Short distance extruder for 3mm (left hand)

 

 

This kit includes:

1 x extruder base

1 x tension lever

1 x 694zz U-groove Idler wheel

1 x 694zz bearing

1 x bearing cover

1 x Brass drive gear

1 x Push-in Fitting 

1 x High tension spring

1 x Assembly screw set 

1 x screw sleeve

 

Please note that stepper motor and cooling system is not included. 

login or register to add your words.

  • Oli S | 04/15/2017

    Hi, where can I find assembly instructions for rhis kit?

    • Zina Luo | 04/18/2017

      Hi Oli,you can email to our technican for help:technical@geeetech.com


  • David Gale | 03/23/2017

    Will the short-distance right hand set fit the Geeetech Rostock 301 extruders?

    • Zina Luo | 03/23/2017

      Hello David ,sorry that need the long distance right hand one .


  • Aaron Glafenhein | 03/11/2017

    will this fit the mecreator 2 extruder?

    • Zina Luo | 03/12/2017

      yes ,the short distance and right hand one is suitable .


  • Cesare Giammiro | 02/25/2017

    Hi, as far as I can see the left hand kit is not compatible with Prusa i3 Pro B as the motor would interfere with X axis end stop. Is the right hand kit back in stock ? I had no problems adding one to my shopping cart.

    • Zina Luo | 02/28/2017

      Hi,The short distance right hand one now have stock ,you can order it.


  • Alan Gingold | 02/14/2017

    Hi, Are the tension lever, idler wheel, bearing & cover compatable with the plastic mounting bracket from the plastic version of the extruder (SKU 800-001-0461). My tesion lever has broken on my Prusa i3 Pro B aand I would rather replace it with metal if possible (but didn't want to take off the mounting plate, just replace the lever). Thanks Alan

    • Zina Luo | 02/22/2017

      Hello Alan,the Aluminum feeder has different bearing between the plastic one ,so need purchse the whole feeder.


  • Duilio Benzi | 02/10/2017

    Hello, i need the feeder kit for my Delta Rostock mini G2S pro. Since there are 2 extruders, i need the left and right version but the right is not available, so is the left compatible with the right one? And if it's not compatible when the right one will be available? Thanks in advance.

    • Zina Luo | 02/13/2017

      hello Duilio,if you used 2 left hand it's too closed for the 2 extruders to print.The long distance right hand is out of stock .


  • Matthew Sheldon | 02/06/2017

    I need both sides for my i3 Pro C. When will the right hand feeders be back in stock?


  • Gustavo Riveras | 01/16/2017

    Hi, I want to change the plastic feeder of my "Geeetech Acrylique Reprap Prusa I3 Pro B" single extruder 1.75mm, for this "MK8 Extruder Aluminum feeder", which is the type that I need? Thanks in advance.

    • rita xiang | 01/16/2017

      Hello Gustavo, Short distance extruder for 1.75mm (left hand) is compatible.

      • Felix Jansen | 02/16/2017

        Hello. Ive ordered the left hand one you suggested, howecer this doesnt fit the geeetech i3 pro b. Please help

        • Zina Luo | 02/22/2017

          Hello,Actually,you can modify the direction of your extruder in the firmware then upload it. And you don't need to change the lever to the right side,just keep its original place(the left side).


  • Mohammad Abu Hasan Khondoker | 01/12/2017

    Hello, I need the feeder kit (both 1.75 mm and 3 mm) right hand-hand. But I see they are currently unavailable. Do you have any idea, when they can be available again? If so, can you please include my name in the watch list to let me know as soon as it's available? Thanks.

    • rita xiang | 01/16/2017

      Hello Mohammad,can you please tell me on which printer you need to use this? I will see if the left hand ones are compatible.


  • Richard ROUSSINET | 01/04/2017

    Hi, i have your famous I3A Pro Alu with one extruder, what is the good option for this feeder ? Is it : Short distance left hand ? Thank you.

    • rita xiang | 01/16/2017

      Short distance right hand is out of stock, but for your printer, Short distance left hand is also ok.


  • Calvez Fabien | 01/04/2017

    Hi, I want to bought it with option Short distance extruder for 1.75mm right hand but I can only choose with left hand. Right hands are they still available ?

    • rita xiang | 01/16/2017

      Hello Calvez,can you please tell me on which printer you need to use this? I will see if the left hand ones are compatible.


  • Joze Verbic | 12/17/2016

    Hi, you have sent me wrong baring dimension. also screw does not fit. please help

    • rita xiang | 12/19/2016

      i am sorry to hear that, pease contact our sales for replacement. sales@geeetech.com


  • Frédéric SCHROBILTGEN | 12/14/2016

    Hi, is this feeder compatible with a MeCreator 2 printer?


  • Richard Neal | 12/07/2016

    could you please show me how this goes together? The bearing is too small the way i see it?


  • deveau pierre-luc | 12/07/2016

    pour le moment les pièces semble être de bonne qualités, mais petit problème avec le roulement a bille qui n'es pas de la bonne grandeur

    • rita xiang | 12/07/2016

      what size of the ball bearing do you receive please?

    • deveau pierre-luc | 12/17/2016

      1 x 693zz bearing que j’ai reçu au-lieu de 1 x 694zz bearing

      • rita xiang | 12/19/2016

        i am sorry to hear that, pease contact our sales for replacement. sales@geeetech.com