Only compatible for Geeetech A10 A20 A30 3D printer with V4.1B version control board
Specifications:
1. Number of filaments: 1
2. Filament material: PLA/ABS
3. Filament size: 1.75mm
4. Nozzle size: 0.4mm
5. Heater cartridge: 24V, 40W; length 85mm
6. Thermistor: PT3-25E2-S2
7. 2 cup head nuts: M3*8mm
8. Net weight: 51g
9. Gross weight: 92g
Does this fit a A30 - not Pro?
Hi this product fit for A30 Pro, Check the motherboard model of your printer and select the correct motherboard model,if you have any problems you can contact my mailbox:myorder@geeetech.com,thanks a lot.
Save regarding order:_br_Order NO:20240419233942272 Order Time:2024-04-19 23:39:42_br_I only received the magnetic platter but not the other things._br_I made a request this morning but didn't get a response. Maybe I'm in the wrong place. Can you kindly help me understand where the other stuff is_br_?_br__br_
Dear customer , Please rest assured , The other package was shipped from the local warehouse, which took a long time to transport,this is tracking number: 4PX3001076595213CN , thanks for your consult .
I'm looking for the Thermistor which is used in My Geeetech A30 Pro printing Head... Can I Order it separately too?
hello, Sorry now seem to be unable to buy,if you have any problem you can contact me through the mailbox : myorder@geeetech.com
Salve è compatibile con la A10 V3.0?
Hello, this is suitable for A10 V3.0. Thanks
Hi there ! thanks for your help with this : _br_I'd like to modify my A20T (with 4.1 Control board) to single extruder hotend : _br_1: Do you have a direct drive hotend that I could use to replace the original one ?_br_If not : _br_2:can I use SKU: 700-001-1121 to replace the original hotend ? _br_3:If yes , I guess I also have to replace the original ventilation enclosure with SKU: 45-001-0478 ? do I need to change other parts ?_br_4:Single hotend has only 2 wires instead of 6 : is that a problem ? can I still print with a mix like 100/0/0 ? do I need to connect straps on other ports ? _br_5:do I need to change the firmware ? for which one? a20? _br_All advice is welcome :) thanks in advance for your kind help !_br_
Hello, if you need a single extruder printer, just use print with a mix like 100/0/0 as you mentioned, it's the same to the result to change it to a single extruder. In fact, we don't recommend to change the printer hardware, because that will cause somes bugs and hurt you printer.
Hi there,_br_is this the right one for the A30 Pro?_br_Thanks_br_
What version of your printer is it? This only fits the A30 pro V4.1B
is there any alternative to this for the A20 with a V4.1B board as the A20 one is not available ?
Hello, pls choose to ship from China and it's available.
where is my board version? i see no version on it. its an A30 Pro
Hi, you can buy it directly, there is only one version of A30pro, which is V4.1B board.
good morning_br_I would like to know where my order is because I haven't heard from you for a while._br_thank you
hello, it is intransit way , you can track it via below link , need about 20-60 days to arrive. sometimes is fast,sometimes slower China post tracking number : LE204857695CN https://t.17track.net/en#nums=LE204857695CN
Hi, Could I replace the nozzle with a 0.2mm or 0.3mm?
hello, yes , but we only have 0.4mm nozzle available. if you can find other size nozzle elsewhere , the nozzle Screw thread need to be M6 , then it can be compatible
Can I replace the nozzle for something like 0.2mm or 0.8mm? also does this work for the A20 as well?
yes, this print head is for A10 A20 A30 A30 PRO single extruder printer
I've got an A10 with GT2560 v4.0 It's this printing head valid to my printer?
yes, it is suitable for A10 printer , also fit A10 Pro, A20 , A30, A30 PRO
I see only comments for A30. I have an A10 and got a new print head 700-001-1121. But it is different from my "Old" one. Old is with teflon tube inside. Not sure i can use new one.
hello, if your A10 printer is with GT2560 REV B control board, then it is the first version A10 printer SKU 800-001--538. and the J head for it is 700-001-1089 , currently it is out of stock. pls check whetehr you can use new print head 700-001-1121 first.thanks
I need help I need j-head 700-001-1105 or failing that instructions to fit upgraded hotend
hello, pls help send more details to sales@geeetech.com
Why is this hotend so different to the J Head on my A30 and how could it be fitted?
hello, if your A30 J head does not look this one, you can order this but pls leave a comment for your order, you need J-head 700-001-1105 for the first version A30. or send email to sales@geeetech.com, will arrange for you offline
cuanto tarda en llegar a colombia?
hello, if you choose registeredmail shipping for your order, will ship by general China post, need about 20-30 days to arrive. if you choose express shipping for your order, will take about 5-7 days to arrive.
Hi, how to install this on an A10 ? it's not the same hotend that i have.
which board you use?
the ordered material has not yet been delivered!
order number,please
Hello I have no news about this order