X
.jpg)
Description：
3D Printer Flexible Removable Magnetic Plate includes two parts：The bottom layer is stuck to the aluminum plate (no need to remove) and the top layer is the model printing layer.
This design can solve the problem that the model is difficult to remove from hotbed, now you can tear off the upper layer directly and remove the model. This surface is easily removed, can be used repeatedly and flexible. The edge of print model won't warp using the magnetic Plate.
Parameter:
1. Name: 3D Printer Flexible Removable Magnetic Plate
2. Material: Mylar + rubber magnetic composite material
3. Adhesive: 3M double-sided adhesive
4. Working temperature: <70 ℃
5. Thickness: total thickness 1.6mm, top thickness 1mm, bottom thickness 0.6mm
6. Size:
Top layer 265*265*1mm
Bottom layer 260*260*0.6mm
TOP
This shows a working temperature of _70C. Is it possible to go up to 80C or what will happen? I want to print on PETG but seems that 70C is too low for adhesion.
The recommended printing temperature is 230 degrees, the hot bed temperature is 70 degrees, the printing speed of the first layer is as slow as possible, try from 20mm/s, and set the fan speed of the first layer to zero, and finally use brim
My Mizra sheet arrived in a few days, _br_PLA + sticks great and leaves a nice surface finish. _br_After 2 months it lost its magnetic hold, which allows your mat and print to slide off the bed while printing is still going.
Hello, please send a photo or video about your printing platform to myorder@geeetech.com， and our technical support will help you solve the problem.
Should it loose its magnetic stick totally in 3months on about 25 prints?
Hello, please send a photo or video about your printing platform to myorder@geeetech.com， and our technical support will help you solve the problem.
Mijn bestelling is een maand onderweg Track and trace werkt niet waar kan de zending zich nu bevinden?
hello, you can track it via below link https://t.17track.net/en#nums=RV596835158CN
recieved in good order ,going to keep as a spare
Hi Neal , good to hear that, welcome back again to find the things you need, Thanks,