X
This V4.0 bord can only be a replacement for V4.0 board . can not replace other board like V4.1B , V3.0 , V3.1 etc .
pls check which board does your printer has before order . the board type will be written on the board itself .
need order a same board as your printer originally has. otherwise will not be compatible .
GT2560 V4.0 control board, developed by Geeetech, is currently used for A10, A10M, A20 and A20M 3D printers. Here are its main features:
1. Using ATMEGA2560 as its core chip, with its flash memory at 256KB and operating frequency at 16MHz.
2. Compatible with 12V/24V input voltage. Featuring dual power supply, one for powering up the heatbed (15A), the other for other electronic parts (10A).
3. The interface for the heatbed comes with a high-power MOS tube, which is of ultra-low conductive internal resistance. High performance and stable.
4. With 2 interfaces for normally open fans and 1 interface for LED light.
5. Driven by 4pcs A4988 stepper motors for a single extruder.
6. With extension interfaces for LCD display and SD card. Support 2004 or 12864 LCD display.
7. Support 3D touch auto-leveling function and filament detector.
8. Using Marlin firmware, stable and easy to operate.
9. Highly integrated and easy to assemble.
Specifications:
Net weight: 72g
Gross weight: 113g
TOP
Can I use this control board version 4 to replace defective control board version 3.1 in printer model A10?
Hi Robert, The V4.0 control board is not compatible with your 3D printer. Thank you for your support.
Sorry, but i need a v3.1 control board. Where can I get it?
Hello, Please rest assured, I will solve your problems,whick kind of printer do you use? you can contact my mailbox:myorder@geeetech.com,waiting for your reply.
I have a Geeetech A10
Hello, In order to solve your problem more efficiently , Please attach some pictures of the product to illustrate the issues , thanks for your cooperation , hope you have a good day . You can contact my mailbox:myorder@geeetech.com, have a nice day.
How long does it take to arrive to saskatchewan in canada?_br__br_
Normally we will send the accessories out by China post and that will take about 35days to arrive. If you need it urgently, pls select express and that will be faster, it will be delivered in 20day normally.
Hi Would this work for the geeetech A10, and does this come with 4pcs of A4988 Motor driver?_br_
Hello, this control board is suitable for A10 V4.0, and the sku including 4 pcs of A4988 motor driver.
I launched the update to go from Merlin 1.1.8 to 2.1.2, I only did it to install the bltouch, something went wrong and now nothing works anymore....I own a geeetech A10. Is this card good for my printer? Now mount a gt2560 v4.0 _br_Waiting for the assistance to explain to me if I can fix my card.....
Hello, please send your request to myorder@geeetech.com Our staff will email you the solution.
When will my order be shipped and when will I receive it
Hello, your package has been sent out on 10th and will arrive within a week. Please wait patiently.
Hi! how long does it take to get the shipment to argentina?
Hi, it takes about forty days.
Is there any software for v4 to be able to put the tmc2208 drivers with Bltouch for an A10 printer?
hello 1. if you use 3d touch on A10 printer , need update firmware that support 3d touch, if your control board is V4.0, pls download A10_G05(GT2560V4+CH340), link is https://www.geeetech.com/download.html?download_id=30 2. if you assemble TMC 2208 drivers , do not need change firmware , but When install the driver , the driver direction need to be opposite from before A4988 direction, and also need change the line sequence of the motor cable at the end of the main board. https://www.youtube.com/watch?v=fmwMq9t-Nxc&t=40s
Does this board have a jumper to set the fan speed, like older versions did?
hello, it does not have the jumper tp set up the fan speed. pls use same board as your printer originally has, V4.0 board will not be compatible.
i have a geeetech a20m. I would like to know if you still have the motherboard A20M_G04 (GT2560 V3.1 + CH340) in stock
hello, yes, we have it , pls send an eamil to sales@geeetech.com
I have a Geeetech A10M, will this motherboard work for my printer. Will I have to flash the geeetech a10m firmware?
hello, this is for A10 PRO printer . if you has A10M printer that originally has V4.0 board , pls order 700-001-1269, it is V4.0 board for A10M
Hi. are the stepperdrivers included?
hi, stepper drivers are not included. need order stepper drivers seperately if need them