This is Geeetech upgraded single head MK8 extruder, which has outstanding quality and the best performance for DIY and professional systems. By simply adding a holder, you can assemble your own dual head extrusion.
With 42BYGHW818 stepper motor, you will find it easy to solve the problems of uneven extrusion, regularly plugging and material reloading.
• Extrusion nozzle: 0.3mm,0.35mm,0.4mm,0.5mm (optional)
• Material of Print: 1.75mm or 3mm PLA/ABS
• Flow rate of Nozzle: about 24cc / h
• Sports shaft speed:40mm/s
• Voltage of heating nozzle: 12V
• Thermistor: 100K NTC
• Operating voltage of cooling fan: 12V
• Heating rods: 6mm, 12V, 30W
• Normal working temperature: 190°-230°
• Net weight: 450g
• 42mm high quality stepper motor with larger torque and less heat buildup
• Special ceramic insulation cotton ensures the stability of heating; electricity-saving
• Direct transmission, without the heavy gears, compact size and weight
• A variety of specifications to choose, the most suitable is the best
NOTE: Make sure the maximum temperature is less than 280°
1 x assembled Geeetech MK8 extruder
For more information, please kindly check our wiki page.
Hi What Assembled Extruder is suitable for Geeetech A30 not A30 Pro
Hi Alan, This MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, SKU is 800-001-0450, you can view the descrition of product and detailes page to ensure it is suitable for your printer. If you have other problems you can contact me via this mailbox:myorder@geeetech.com, thanks a lot.
Does this fit a A30 (Oldenburg one, not Pro)?
Hello, this product is not fit for A30 printer, thanks a lot.
I have the a10 printer and I’m having extruded issues and can not print because of it. I want to get a direct drive system and I was wondering if this will work for the a10 single extrusion? Please help as I do not know what to do thanks!
Dear customers , you can contact our technical support mailbox :support@geeetech.com or create a ticket on our official website , In order to solve your problem more efficiently , Please attach some pictures of the product to illustrate the issues , thanks for your cooperation , hope you have a good day .
Does this fit the PI3 Pro x
Dear customer, In order to solve your problem more efficiently,you can contact our technical supports mailbox :support@geeetech.com or create a ticket onour official website ,He will give professional advice ,thanks for your consult
My extruder arrived quite quickly but was missing the metal fixing plate. I had written a note with the order too. It would be better if it was listed on the store so people could just order it. I am quite disapointed as I will have to try and make one. I am restoring a Geeetech i3 and it was missing. Happy New Year of the Dragon!
Dear customer, thanks for your feedback , we will make positive improvements , hope your have a good day .
does this work with the pi3 pro w
I'll send your question back to technical support,I will send info to your mailbox , please check it , if you have any problems you can contact me mailbox: myorder@geeetech.com .hope you have a good day .
i have the same question
Hello , You can send your questions to my email address :myorder@geeetech.com , thanks again , have a nice
does this work with the i3 pro w
Hi Elijah, It is suitable for the I3 Pro W printer. Thank you for your support. If you have any problems, you can contact me at this mailbox: myorder@geeetech.com. Have a nice day.
Bonjour, je ne peux pas fixer l'extrudeur MK8 au support prévu pour car il manque une plaque, j'ai vu un commentaire similaire, je demande donc le même envoi s'il vous plait. MErci
Dear customer, Don't worry, I'll issue you a new bracket, Thank you for your consultation.this is my mailbox myorder@geeetech.com ,if you have porblem please let me know .
Bonjour, comment je suis sensé le visser sur le support pour mk8 ? Il n'y a pas de trou nul part
Dear customer, you can contact our technical supports mailbox : support@geeetech.com or create a ticket on our official website ,hope you have a good day .
Hello. I have an old Geeetech i3 and would like to buy this assembly with fixing plate but it seems you now fit a longer motor? Does it fit the older i3 models too? if the motor is too long I am worried it touches the right side of the printer or not?
Dear customer, the issues of machine you can consultant our technical support , he will give professional advice of using machine and you can contact this mailbox :support@geeetech.com ,hope you have a good day .
I adjusted my Anet A8 to print with the Geeetech MK8 hotend. The extruder pushes the filament out on the top._br_Which colored cables do I need to swap so the extruder pulls the filament in?_br_
Hello, if you have any technical problems, please send to myorder@geeetech.com and our technicians will solve them for you.
I recently bought those components:_br_Assembled MK8 extruder and Pro B and Pro W Printer MK8 Extruder Holder but there is something missing? You can't fix the extruder to the holder?_br_I saw on the a photo on the holder page a white metal plate that is fixed to the extruder and which you can use to attach to the holder._br_Where can I get this from?_br_Can you please send me the part number to order it!_br_Thanks.
Thanks for your support to geeetech, we will send you the metal plate for free, please wait patiently.
I recently bought those components:_br_Assembled MK8 extruder and Pro B and Pro W Printer MK8 Extruder Holder but there is something missing? You can't fix the extruder to the holder?_br_I saw on the a photo on the holder page a white metal plate that is fixed to the extruder and which you can use to attach to the holder._br_Where can I get this from?_br_Can you please send me the part number to order it!_br_Thanks.
Thanks for your support to geeetech, we will send you the metal plate for free, please wait patiently.
Can you use this on the a20 thanks
No, A20 is assembled with borden extruder, and MK8 is a direct extruder.
Hi, I have a question, what are the specific models of the cooling fan and the hot end? Or could you tell me more technical information about them?
Hello, here is the information: Cooling Fan (150mm cable length) 40x40x10mm-DC12 v,6000RPM, 2-pin red and black cable, 3-pin terminal Hotend: MK8 extruder nozzle 2.0-0.4mm
Will this come ready to print with 3mm material?
Hello, MK8 can support 3mm material: Extrusion nozzle: 0.3mm,0.35mm,0.4mm,0.5mm (optional) Material of Print: 1.75mm or 3mm PLA/ABS
Hello - is this extruder compatible to the A20?_br_AND:_br_- how to install it, i can't see holes for screws. Is there a manual for changing online?_br_- I habe BLtouch installed - can I use it longer without more modifications?_br__br_Thanks
Hello,this extruder is used for prusa i3 series
Can i upgrade my geeetech a10m to print with flexible materials?any kit. If i can do this
A10M can not print TPU well. sorry , we are not sure which extruder you can buy to do it
is this compatible with the geeetech a10m?
hello, it is not for A10M
hi, do you have the mirrored one? can you ship it to philippines?
hello, yes, we have the opposite direction/ the mirrored extruder , 2-0.4mm it is not listed on our store , you can order this extruder, but leave a comment for your order , need 700-001-0845 instead. i will change order for you when i process orders.
is this compatible with the MeCreator2?
hello, it can not be used on mecreator, you need SKU 700-001-0947, it is not listed on the website,if you need it, pls send email to sales@geeetech.com , will arrange for you offline, thanks
Hello, is this item compatible with a prusa I3 proB ?
yes, it can use
Is this extruder for a30 ?
this extruder is used for prusa i3 series, you can send mails to victory.lei@geeetech.cn,he will arrange it offline. thanks
Fast delivery and working well
Thanks your positive comments, thanks Philip
Can this print nylon CX12?
yes,
is that extruder compatible with A30 ? thanks
Hi Jean, this extruder is used for prusa i3 series, you can send mails to victory.lei@geeetech.cn,he will arrange it offline. thanks
These products I have not received 20180424160410607, please review your situation. Purchase date Order time: 2018-04-25 06:04:10
Hello Florindo, Can u please check double check in local post? if the parcel missing, we will send you an replacement. thanks
Hi, I ordered this extruder a week ago and have emailed orders to find out when it will be shipping and have no reply, can you tell me what is happening Order Information - 20180530032519100.
Hi John, my colleague should reply you by mails, please double check, bu the way,the parcel is send out, will send you tracking soon
Hi, I already have an optimum Geeetech PRO B with one MK8 extruder, can I apply also this eother extruder for print with two different color? If yes, I must buy only the mk8 and your holder or I must buy other products? And then, can I apply the holder with two extruder at my actual carriage or I must print onother carriage type? Thanks and ciao
heelo, please visit this links:http://www.geeetech.com/forum/viewtopic.php?f=13&t=17887,here tell you how to update PROB to dual extruder
Hi, I bought the upgraded mK8 extruder because I had troube pushing the filament with the old one but there were no error, when I changed it to the new one I got an err:MINTEMP. I tried to put the old back and I got same error. On some forum they say it's the termistor problem but before I changed to the upgraded I had no problem and now I got the problem for bot..
Hi Nieberding,sorry for late reply.You can contact our technician for help:technical@geeetech.com,thanks
I have this extruder on my I3 X. Can I print PETG with this? The motor seems to have trouble pushing the filament even at temperatures around 250C.
Hi Dave ,i think it's the extruder's problem ,you can contact our tech on facebook to teach you how to make it :https://www.facebook.com/groups/315127105604393/
Ordered this, among some other parts, over a month ago. Did not receive anything, no response either on mail, skype, etc. Bad experience..
Hi Vliet ,sorry for the inconvenient here ,could you pls send me your order number to check ?Sometimes shipped by small mail and when parcel arrived the courier not called to you but put the parcel at the local post ,could you pls contact to the local post for your parcel ?
I do already have one of these, how can I upgrade it to dual-extrude? What spare-parts do I need?
Hi Martin,in order to upgrade to dual extruder ,you can buy one more extruder and the dual extruder holder.
Does this work with Me Ducer?
Hi Jack,yes it does.
Hi Jack,yes ,it does.
hi dose this work with the anet a8 thanks
Hi John,you can check the specification and compare it.
Hello, where can i have the stl of the aluminum part, the one where the filaments enters? thank you
Hello paulo,which STL you would like pls email to our sales and she will help you :sales@geeetech.com
Hi, could you tell me if there is an extruder for the left side ? This extruder is for right side, when I use two extruders. Thank you
Hi Jorge,yes that we have the left hand extruder,You can remark to the order when you would like to buy.
I want to buy one of these today if it will work with my Geeetech Prusa i3 A pro. It works great and I want to add another extruder to have dual extruders. thank you very much. Dave
Hi Dave,yes it can work with the A pro ,but if you want to upgrade your A pro to the dual extruders ,you also need the extruders holder.Pls contract to the sale for detail:sales@geeetech.com
Excellent. Fast shipping.
thank you.
Hello, Is this extruder compatible with the geeetech m201?
it is not comatible with M201, can you tell me what kind of modification do you want to do with your M201?
I was thinking of changing the extruder with mixer, which gives jamming problems, for this is simple. It would connect the injection servomotor to one of the ports of the two that it has and it would calibrate it to 100% of injection, and the probe with the resistance in its place.
hello, I have not received it ! why ? thanks Hubert
hello Hubert, can you please provide your order number, i will check it for you.
I want only Hotend of this Extruder. Can I buy it, and parts number please?
hello, i am sorry that the spare parts are not sold separately.
Is compatibile with Geeetech i3x ??
yes, it is compatibile with all our printers except delta printers.
Hi, Is this assembled extruder left or right ? long or short distance ? Thank you.
left or right, it depends on you, you can see the release handle from the picture, if you want to make a dual extruder, make sure the release handle is opposite with your current one. If this picture is the same with yours, please leave a message when checking out that you need a opposite one. this one is for short distance feeding.
Hi friends. I receive que product, but it came with some wires cut. Do you send it cut ? I ask it because I need to know who did the damage for clain the responsibility. Thank you
please send a picture to myorder@geeetech.com
could you tell me the HS code of this product ?
Hello Jorge, the HS code of extruder is 8477900000.
Hi , is the step motor nema 14 included ? tks
Hi, yes it is included.
Hi, Will this work as a replacement for the extruder on a Me Creator?
Hi, yes it can be used on Me Creator.
I purchased a Geeetech Prusa i3 ProC dual extruder printer a few months ago. Will this model replace an extruder on my printer? I damaged a heated end when threading in the nozzle. If it fits, I'd like to buy two.
I submitted a request regarding the order I placed yesterday to send me one of each rather that two of the same, which I presumed to be left (according to the images). Let's hope so!
Hello, MK8 can be used on i3 pro C. But MK8 has two types, one is LEFT and the other is RIGHT, so please confirm it with the sales when you purchase. Thank you.
Hello Charlie, you can confirm it with the sales if you are not sure. Thank you.
Hello, I received the Geeetech MK8 dual extruder tonight, looks great. I wired it up to replace the dual extruder in my Makerbot Replicator 2x. I powered it up and the extruders do not heat up. After some time I would get an error message to check connections. I triple checked the wiring and everything matches the way it was with the makerbot extruder. Any ideas? Please help me troubleshoot this, burned an entire night trying to get this fixed. Thanks
Hi Chris, you can contact this e-mail technical@geeetech.com for technical support. Thank you.
Is there a guide or manual for this? Mine is not feeding properly and I can't find any type of instructions or guidance for setting this up and adjusting it. My stepper just keeps clicking and not feeding which tells me it's probably too tight and needs adjusting. There is of course a threaded bolt sticking out of it but that doesn't seem to actually change anything.
Hi you can chat online with our technician through the orange chat window in the bottom right corner of your screen when you are on our homepage. Or you can contact this e-mail sherry.li@geeetech.cn for technical support. You can also go to our forum to refer to FAQ or post your problem. http://www.geeetech.com/forum/ Thank you
I purchased one of these but am having issues with it not feeding. It makes a clicking sound and the filament bobs up and down instead of feeding through. I can't find any guidance on properly adjusting it.
I recently purchased a Prusa i3 X printer that comes with an MK8 extruder. The wiki docs claim that the MK8 has a 7mm drive gear, but, when I opened it up to inspect the gear, I saw that it was actually ~10.6mm gear, which I believe is the older gear on the MK7. Can someone please explain why this is?
Sorry for the late reply, for sales, delivery and replacement question please contact this e-mail sales@geeetech.com Please describe your question and provide your order number in your e-mail and my colleague in sales department will help you to solve your problem. Thank you
I recently purchased an assembled MK 8 extruder for my Makerbot Replicator 2. When I tried to install the extruder, the unit was too tall and I had to modify the exiting mount for the side fan that blows air onto the part. It also came with a Thermistor installed, instead of a thermocouple, which is required by the Replicator 2. I replaced the thermistor. With everything assembled and connected then the stepper motor didn't work!. I found out that it was wired different then the Replicator 2. I could have used the cable that came with the MK8, but I would have had to splice the cable since the connector on the Replicator 2 was different. After re-wiring the stepper motor, by swapping two of the wires, the stepper motor worked fine. After all that, the new assembly is up and running and my Replicator 2 is working better than it ever has. It prints every time without uneven extrusions and clogging. I got it working, but on the downside a novice might have problems getting it to work. The quality of the unit is excellent, but installation is a bear.
is it compatible with rumba
we are from nuts and boltz India , recently we purchased this product, and i got to know this product is not compatible to rumba, because this mk8 is not having thermistor , it is having thermocouple, to decode the values we need to interface it ad595 or max6675, i m asking you once again , can u tell me it is thermistor or or thermocouple, please cofirm