Step angle:1.8°
Number of phase:2
Insulation resistane:100MΩmin.(500V DC)
Insulation class:class B
Rotor inertia:57g.cm²
Mass:0.24kg
Rated voltage:3.75V
Rated current:1.5A
Resistance per phase:2.5Ω±10%
Inductance per phase:5.0mH±20%
Holding torgue:500mN.m
Detent torgue:1.5mN.m
Package List:
1 x Nema17 stepper motor
Hi, I have a geetech A30M printer. I want to buy 2 motor for it, but I don't have the motors any more, could you help, I'm after the Y Axis moter what drives the build plate, and the X Axis motor that drives the excruder, it's the part numbers I need so i can order them. I don't have any model numbers, but I bought the printer about 5 years ago off Ebay._br__br_Regards
Dear customer, you can contact ebay platform customer service , they will solve your problems , thanks for your supporting .
Is this the motor for y axis of a30m ?
Hello, I will feedback your questions to technical support. I will send it to your mailbox later. Please check it. Thank you for your consultation. this is my mailbox myorder@geeetech.com ,if you have porblem please let me know .
Bonjour j ai acheter 9 imprimantes donc je voudrais savoir le fonctionnement pour la garanties des pièces affectueuses _br_3 moteurs pas à pas et une alimentation_br_Merci d avance
Hello, about the warranty, you can contact with the platform sales which you purchased the 3d printer from.
bonjour _br_j ai une alimentation et 3 moteur pas à pas qui ne fonctionne pas dés le début
Hello, please create a ticket in Help & Support Column in your account, technical staff will help you Steps: A. Open our website: www.geeetech.com, then Log in or Register a new account B. Click your account and select“Help&Support” C. Create a new ticket or search the old one D. Infill the ticket detail,including description and some pictures/video links of the issue
I need stepper motors 42SHD0227-24B1. What should I order for this?
hello, you can order sku : 700-001-0999 https://www.geeetech.com/stepper-motor-42shd022724b-p-1071.html
Passt der auf den A20T
hello, you can order it , but write a comment for your order, need A20T motor ...instead ( you can check which motor you need , the motor model will be written on the motor itself, you may also can see the SKU number on it ). we will send the motor you need to you when i see your comment when processing your order .
I need y axis stepper for A10T will this work? Any available in the USA?
hello , motor is only available in China warehouse . pls check your Y axis motor model , the model will be written on the motor itself you can order any motor on our website, but write a comment for your order , need motor ....instead for A10T y axis (write motor model you need )
hi I research a motor extruder for my a20m "D42HS3418-24B22" ref 700-001-1239 thk
hello, if you need exruder motor D42HS3418-24B22 , you can order this page motor ,but leave a comment for your order , need 700-001-1239 instead . i will change order for you when i process orders
heloo,i need SKU:700-001-1239 for use a10m. TNKS!
hello,you can order this motor ,and leave a comment for your order, need motor 700-001-1239 instead. i will change order for you when i process orders and see your comment for your order . sorry .but not comment here on the product page . but leave a comment for your order when you place an order for it . thanks
Is this the extruder motor of the A10? If not, can you provide the part number? Tnks
hello, you can order this motor, but leave a comment for your order you need A10 extruder motor, and your A10 is with GT2560 V3.0 or V3.1 control board, will send you the right motor
Does this motor fit a monoprice mini/Malyan 200?
42SHD3418-24B15, this is moter type, if the printer use this modle, it can use
Does this stepper fit for a30 printer ?
yes
hi I want to replace my extruder stepper is this the same motor? mine is the 42shd0217-24b cheers
can you tell me which printer you use? thanks
Are these compatible with my i3 Pro C Acrylic? is there a wiring/stepping chart for these?
please send mails to victory.lei@geeetech.cn, thanks
I have M201 with GTM32 pro board and driverA4988 , and stepper motors on Z - axe 42SHD0034-20B which is little weak . Can I change this motors and upgrade to 42SHD0217-24B ? Do the driver A4988 handle this ?
Hi Marijan,yes you can use this stepper motor .
Can I change my motors 42SHD0217-24B from my M201 printer with this "bigger" motors on my Z axes ? Do the driver A49887 on GTM32pro hold this motors ?
for the stepper motor can be used on M201 .
Can drive this motor by A4988 Reprap driver?
how many step/mm for this motor?
In most cases these figure should be calculated by yourself, you can refer to:http://prusaprinters.org/calculator/#steppers
I want to make a mega prusa, so I want to know is this OK for Y axis (About 0.8 kg Aluminum plate 40x40cm)?
Hi, I want to make a mega prusa. is this step motor OK for Y axis? I want to use Aluminum bed about 0.8 kg.
it is ok.
Are these motors compatible with 1/32 step setup of the DRV8825?
yes, but you need to make sure your control board support such subdivision
A4988
Is it possible to cancel my order for the stepper motor 42shd0217-24b ?? My pb comes from the stepper driver i have just ordered in parallel.
Hello, for sales, delivery and replacement question please contact this e-mail sales@geeetech.com You can also contact online sales. Thank you.