This 3-in-1 out hot end kit is designed for A10T A20T A30T 3D printer. It can greatly reduce the risk of clogging or jamming so as to save filament for you. With its good craftsmanship, three pieces of different color filament could uniformly mixed together to create amazing prints. Besides, its standard 0.4mm nozzle delivers satisfactorily smooth surface finish. Mix-color printing enriches your daily life~
Specification:
1.Number of filaments:3
2.Filament material:PLA/ABS
3.Filament size:1.75mm
4.Nozzle size:0.4mm
5.Heater cartridge:24V,20W;diameter & length:6mm*15mm
6.Thermistor: PT3-25E2-S2
COMMANDE ANNULEE
Hi MUSTAPHA, If you need any help you can contact me through this mailbox:myorder@geeetech.com, have a nice day.
Hello, order number 20241121005128349 I have only received the hotend kit, but I am missing a cooling fan, mechanical end stop, cooling radial turbo, 3d printer leveler gla10-V2 which I have no notification and no email about when it will arrive, and if it has been shipped or not yet. Thank you, greetings.
Hi Tomas, the shipping information for your order has been sent to your mailbox. Please check it. Have a nice day.
Hola, el tubo del teflon hasta donde hay que introducirlo en hotened a tope o hay alguna medida de distancia.
Hello, In order to solve your problem more efficiently , Please attach some pictures of the product to illustrate the issues , thanks for your cooperation , hope you have a good day . You can contact my mailbox:myorder@geeetech.com, have a nice day.
Where is the hot end Throat tube WITH the tiny brass check valve stopper? Can't find it anywhere Doesn't Geeetech have ALL the parts I need?
Dear customer, this is product link : https://www.geeetech.com/a10t-a20t-a30t-3-in-1-out-hotend-kit-p-1126.html , welcome order any time , if you have any problems you can contact me mailbox: myorder@geeetech.com .hope you have a good day .
does this come with a silicone sock like the one on my machine? Where can I order the silicone socks?
Dear customer, this is product link : https://www.geeetech.com/a10t-a20t-a30t-3-in-1-out-hotend-kit-p-1126.html , if you have any problems you can contact me mailbox :myorder@geeetech.com please let me know .
la mia stampante A30T malgrado che abbia cambiato l'hotend originale poi la carta madre su i consigli di Geeetech non arriva piu a schiogliere il filo di plastica, misurando la temperatura a l'hotend regolata sulla stampante a 250 gradi su l'hotend gli manca 50 gradi !!!! dunque non puo scioglire il filo ma lo attorcia. Non so piu cosa fare
Dear customer, Regarding machine temperature setting and adjustment,you can contact our technical supports mailbox : support@geeetech.com or create a ticket on our official website ,hope you have a good day .
ho ricevuto un hotend A30T ma non va in temperatura gli manca 70 gradi nessuno mi risponde che devo fare ?
Dear customer, you can contact our technical supports mailbox : support@geeetech.com or create a ticket on our official website ,hope you have a good day .
Hi,_br__br_My replacement hot end comme without the square metal plate between the radiator end the nozzle._br_Is this normal._br_Do I need to replace it taking it on my old head ?_br__br_Thanks,_br_ Laurent.
Hello, it's normal, the new version hotend no longer assembles square metal plate. You can use it as usual.
Hi does the hotend come with thermosister and the wires shown in the picture.
Hello, yes, the this sku surely including the thermistor and the wires.
Habe ein Hotend für meinen A20T bestellt, superschnelle Lieferung. Bin echt begeistert. _br_Jetzt muss ich es nur noch einbauen.
thanks for you supporting to geeetech.
El hotend viene con fallo,cómo hago para devolverlo y que me devuelvan el dinero?
Hola, ¿cuál es el problema con su producto? Tal vez pueda enviar el modelo de la máquina, el problema y las imágenes a myorder@geeetech.com, podemos brindarle una solución.
Is it possible to get the specifications and a datasheet with the dimensions of the hotend so I can design brackets and figure out if I can mount it on my printer?
Hello, here is the specification and you can find it in any product pages of our accessory: Specification: 1.Number of filaments:3 2.Filament material:PLA/ABS 3.Filament size:1.75mm 4.Nozzle size:0.4mm 5.Heater cartridge:24V,20W;diameter & length:6mm*15mm 6.Thermistor: PT3-25E2-S2
Hello, isn't there somewhere i can find only the heater block for the A30T? Do I have to buy the whole hot end? thanks
hello, A30T heater block is not listed on our store , pls order below link item , but write a comment for your order , need A30T heater block 45-001-0660 instead. pls comment for your order on your order page , not comment here in product page. https://www.geeetech.com/hobbed-bolt-p-991.html
Hello I need to replace my hotend, for my GT A20T MOTHERBOARD BOARD_GT2560_V3_A20. You mention this hotend for the A20T, but is it good for the GT2560_V3 as well as the GT2560_V4?. Because nowhere its mention for the GT2560_V3 motherboard. I would like to be sure before ordering so as not to have to return it if it does not work thank you. _br_ Bonjour je doit remplacer mon hotend, pour ma GT A20T MOTHERBOARD BOARD_GT2560_V3_A20._br_Vous mentionnez que ce hotend pour la A20T, mais es -que ses bon pour la GT2560_V3 _br_ainsi que la GT2560_V4 ?. Car nul part ses mentionner pour la motherboard GT2560_V3. j'aimerais etre sur avant de commander pour pas a avoir a la retourné si ca fonctionne pas merci_br_
Hello, this hotend is used for A10T/A20T/A30T 3 extruders 3d printer, can't be used for other 3d printer.
Yes, but my motherboard is a GT2560_V3. What's the point of changing my GT2560_V4 motherboard?
Hello, are you looking for Hotend or? If your 3d printer is A10T/A20T/A30T, no matter what your control board is, this hotend can be used for it.
hello, can you write the parameters of the cold and hot zone separation plate. I want to make it from textolite/
Hello, Sergey,please kindly send the message to this e-mail:sales@geeetech.com, so that we will send the parameters to your check
Does this fit the A30T? is in the description but not the product info
hello, yes, this is for A10T A20T A30T
SKU:700-001-1265 how can this greatly reducing the risk for jamming ???
hello, for clogging problem, 1.The biggest possibility is that the Teflon tube at the hotend is not inserted to the end/deep bottom , resulting in a gap. When the material is withdrawn, it is stuck in the gap and the material cannot be fed. 2.The hot end cooling fan does not work, resulting in the hot end throat is very hot, filaments blocked the throat 3.the drawback distance in the print settings is too large, it is better to be about 6mm 4.When printing one color prints, pls make sure other 2 extruders are also loaded with filaments. which meas no matther what you are printing, pls make all the 3 extruders are loaded with filaments. if you print single color prints.pls print with 3 extruders with 33% 33% and 34% for a while , then clean filament and nozzle.then start your single color prints printing . 5.The torque of the extruder is too small, you can adjust the stepper driver voltage of the extruder, suggest 1.2V
1.How can this hotend greatly reduce clogging ?? 2.is there no bowden tube down to the nozzle ??
hello, for clogging problem, 1.The biggest possibility is that the Teflon tube at the hotend is not inserted to the end/deep bottom , resulting in a gap. When the material is withdrawn, it is stuck in the gap and the material cannot be fed. 2.The hot end cooling fan does not work, resulting in the hot end throat is very hot, filaments blocked the throat 3.the drawback distance in the print settings is too large, it is better to be about 6mm 4.When printing one color prints, pls make sure other 2 extruders are also loaded with filaments. which meas no matther what you are printing, pls make all the 3 extruders are loaded with filaments. if you print single color prints.pls print with 3 extruders with 33% 33% and 34% for a while , then clean filament and nozzle.then start your single color prints printing . 5.The torque of the extruder is too small, you can adjust the stepper driver voltage of the extruder, suggest 1.2V
Can I upgrade an A10 Pro with this? What I need? Thanks!
hello, is your A10 PRO with GT2560 V4.0 board ? could you send an email to sales@geeetech.com for more details, thanks
Hallo, kann ich hiermit meinen A30 Upgraden? Und was brauche ich zusätzlich noch?
hello , not . A30 can not be upgraded with this
which nozzle should I buy to replace it?
hello , nozzle sku 45-005-0448 is compatibel for A10M, A20M, A30M,A10T, A20T, A30T
I noticed that my v4.0 board has a place for a 3rd extruded on my A10m is there a way to upgrade this printer to a 10 series by buying the carriage and 3rd stepper motor? That would be pretty sweet if there was
hello, yes ,if your A10M is with 4.0 board , it can be upgraded into A10T , need a complete hotend group, one extra extruder, filament detector , and new extruder cable, etc. you can send an email to sales@geeetech.com
Is this an upgrade to the 20T hot end or is the same one that's included with it to begin with?
hello, it is same hotend as the A10T A20T A30T comes with
Hey. Can i use this one on my A10M? :)
no, this is for 3 in 1 out printer A10T A20T, you need to buy 700-001-1127 hotend