Reviews
Displaying 2401 to 2500 (of 3673 reviews)
PLA Red 3D Printer Filament 1.75mm 1kg/roll
Reçu bien emballé, s'imprime très bien sur Geeetech A10 Pro et A10T. 210° 50mm/s Rétractation 2.80mm...
Date Added: 06/23/2020 by Philippe RADOUX
New Upgrade Tempered Glass Bed 3D Printer Platform, 235 x 235MM for A10/A10M/A10T/Mizar/Mizar Pro
Do i need specific things to replace mylar with a Superplate on my A10 ?
Date Added: 06/22/2020 by ALLARD Jean Pierre
Geeetech 3D Touch V3.2 Auto Leveling Sensor
hi, pls send an email to sales@geeetech.com, will send the pic to you, thanks
Date Added: 06/19/2020 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi,
Can you please advise on how to connect the 3dtouch to the A10T unit?
I think that it is m...
Date Added: 06/17/2020 by Andrew McCabe
1m MXL belt (sold by meter)
no,it is not suitable for A20M
Date Added: 04/02/2020 by Jocelin Jia
1 Meter 2GT Belt (sold by meter)
yes, it is suitable for A20M
Date Added: 04/02/2020 by Jocelin Jia
1m MXL belt (sold by meter)
Hello, is it suitable for a20m?
Date Added: 04/01/2020 by Gabriele Fabbris
1 Meter 2GT Belt (sold by meter)
Hello, is it suitable for a20m?
Date Added: 04/01/2020 by Gabriele Fabbris
Geeetech 3D Touch V3.2 Auto Leveling Sensor
hello, did you set up Z offset ? pls refer to below link for 3d touch calibration video .
https://...
Date Added: 03/25/2020 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
hello I have a 3d touch but when I make an autohome it does not activate and my nozzle almost breaks...
Date Added: 03/25/2020 by Jules GUERINET
A30 PRO A30M A30T Super Plate Glass
directly on the aluminum plate, you can use 2-4 clips to fix it.
Date Added: 03/24/2020 by Jocelin Jia
A30 PRO A30M A30T Super Plate Glass
Do I put the glass on top of the sticker or directly on the metal bed?
Date Added: 03/21/2020 by Kevin Burns
A30 PRO A30M A30T Super Plate Glass
yes, it can work with A30 A30M A30T .
if you are going to use the superplate glass to replace the ...
Date Added: 03/20/2020 by Jocelin Jia
A30 PRO A30M A30T Super Plate Glass
Does this work with the A30T?
Date Added: 03/20/2020 by Kevin Burns
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hi, this is for A10, A20, A30 printer. we do not have aluminum feeder kit for A10M A20M yet.
if yo...
Date Added: 03/13/2020 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
hello, for printer (with GT2650 V4.0 board) 3d touch connection, the brown wire is on the top left c...
Date Added: 03/13/2020 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi, I've bought a 3D touch for my new Geeetech a10 (2650 V4 board) but I've not found instructions a...
Date Added: 03/13/2020 by Rubén Abad Prados
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
You state that the A10M requires a long-distance version of the Mk8 extruder upgrade.
Why do you n...
Date Added: 03/13/2020 by David Errington
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
helo, no , can not use on mecreator 2, this can only work with A10, A20, A30 printer
Date Added: 03/07/2020 by Jocelin Jia
A20 A20M A20T Mizar S Super Plate Glass Platform For Thunder , 260*260mm
hello, you can use some samll clips to fix the glass platform on aluminum plate, so it can be easily...
Date Added: 03/07/2020 by Jocelin Jia
New Upgrade Tempered Glass Bed 3D Printer Platform, 235 x 235MM for A10/A10M/A10T/Mizar/Mizar Pro
hi, yes, it means pysically move the z limit switch for about 3mm if you are going to use the superp...
Date Added: 03/06/2020 by Jocelin Jia
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Will this work with the mecreator 2?
Date Added: 03/05/2020 by Nathan Coultis
New Upgrade Tempered Glass Bed 3D Printer Platform, 235 x 235MM for A10/A10M/A10T/Mizar/Mizar Pro
"pls remember to up the limit switch on Z axis for about 3mm" can you give me some details on this -...
Date Added: 03/03/2020 by Russell Phillips
A20 A20M A20T Mizar S Super Plate Glass Platform For Thunder , 260*260mm
hello. just received this superplate. need to cange betwen mylar and this frequently, so my question...
Date Added: 02/22/2020 by Federico Mio
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
hello,yes, this can work with A10, A20, A30
Date Added: 01/16/2020 by Jocelin Jia
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Will this MK8 feeder work with A10 3d printer?
Date Added: 01/15/2020 by Nick Rudzikewycz
1m PTFE Teflon Tube Pipe 2*4mm For Filament
yes, it works on all the printer, A10 A10M A20m A30m A10T a20t etc
Date Added: 01/08/2020 by Jocelin Jia
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
yes, this will work for A30
Date Added: 01/08/2020 by Jocelin Jia
Nema17 Stepper motor 42SHD3418-24B15
hello, you can order this motor, but leave a comment for your order you need A10 extruder motor, and...
Date Added: 01/08/2020 by Jocelin Jia
A10T A20T A30T 3 in 1 out hotend kit
no, this is for 3 in 1 out printer A10T A20T, you need to buy 700-001-1127 hotend
Date Added: 01/08/2020 by Jocelin Jia
A10T A20T A30T 3 in 1 out hotend kit
Hey. Can i use this one on my A10M? :)
Date Added: 01/06/2020 by Sven Willms
Nema17 Stepper motor 42SHD3418-24B15
Is this the extruder motor of the A10? If not, can you provide the part number? Tnks
Date Added: 01/06/2020 by Federico Bitonte
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
So this will work for the Geeetech A30 with the 320mms by 320mms by 420mms just so I am 100% sure
Date Added: 01/02/2020 by Scott Sanford
1m PTFE Teflon Tube Pipe 2*4mm For Filament
Will the work on A10
Date Added: 12/30/2019 by SHONA PARKES
Reprap Ramps V1.4 2004 LCD controller with adapter
hello, pls try to reconnect the lcd cable, and check whether there is obvious damage of the cable (t...
Date Added: 12/25/2019 by Jocelin Jia
Reprap Ramps V1.4 2004 LCD controller with adapter
My board is not working it makes weird characters and docent display any words. any help would be ap...
Date Added: 12/23/2019 by jake goodgall
V3.0/V3.1 Extruder Small Circuit Board Extension Board for A20 A20M A30 A10 A10M
yes, pls send an email to sales@geeetech.com , will arrange for you offline. it is not listed on the...
Date Added: 12/23/2019 by Jocelin Jia
V3.0/V3.1 Extruder Small Circuit Board Extension Board for A20 A20M A30 A10 A10M
Have you got the wire between this PBC and GT2560 V3 board?
Date Added: 12/22/2019 by Jean-Charles MARTIN
3D Printer Brass M6 nozzle for MK8 extruder/0.3mm
hello, no, this is M6 nozzle for MK8 extruder. A10M need M7 nozzle, pls buy 45-001-0448
Date Added: 12/17/2019 by Jocelin Jia
A10/ A10 Pro/ A20/ A30 Pro 24V Printing Head, Single Extruder Hotend, 24V 40W, 85mm long heating rod, for V4.1B board version printer only
hello, if your A10 printer is with GT2560 REV B control board, then it is the first version A10 prin...
Date Added: 12/17/2019 by Jocelin Jia
New Upgrade Tempered Glass Bed 3D Printer Platform, 235 x 235MM for A10/A10M/A10T/Mizar/Mizar Pro
hello, yes, i am sure it is for A10 and A10M printer.
Date Added: 12/17/2019 by Jocelin Jia
3D Printer Brass M6 nozzle for MK8 extruder/0.3mm
Is it compatible for Geeetech A10M?
Date Added: 12/17/2019 by Daniel Hernan Perez Arias
New Upgrade Tempered Glass Bed 3D Printer Platform, 235 x 235MM for A10/A10M/A10T/Mizar/Mizar Pro
Are you sure it is for A10? The bed size of A10 is 220x200 and not 235x235
Date Added: 12/14/2019 by Eddy Ukstein
A10/ A10 Pro/ A20/ A30 Pro 24V Printing Head, Single Extruder Hotend, 24V 40W, 85mm long heating rod, for V4.1B board version printer only
I see only comments for A30. I have an A10 and got a new print head 700-001-1121. But it is differen...
Date Added: 12/14/2019 by Volker Hapke
2pcs* 3010/DC 12V Cooling Fan for Extruder Hotend/ Control Board 30x30x10mm
hello, pls send an email to sales@geeetech.com, tell us you need the fan inside the hotend or ? will...
Date Added: 12/10/2019 by Jocelin Jia
2pcs* 3010/DC 12V Cooling Fan for Extruder Hotend/ Control Board 30x30x10mm
Hello, Working for Geeetech A10 ? Thanks
Date Added: 12/08/2019 by Sylvain Vandroux
A10/ A10 Pro/ A20/ A30 Pro 24V Printing Head, Single Extruder Hotend, 24V 40W, 85mm long heating rod, for V4.1B board version printer only
hello, pls help send more details to sales@geeetech.com
Date Added: 12/03/2019 by Jocelin Jia
A20 A20M A20T Mizar S Super Plate Glass Platform For Thunder , 260*260mm
hello, if you are going to use the superplate glass to replace the black mylar sticker, one tip need...
Date Added: 12/03/2019 by Jocelin Jia
A20 A20M A20T Mizar S Super Plate Glass Platform For Thunder , 260*260mm
Hello. I'm on the way to change from the mylar to the superplate. How i change the limit for the z a...
Date Added: 12/02/2019 by Paolo Fornara
A10/ A10 Pro/ A20/ A30 Pro 24V Printing Head, Single Extruder Hotend, 24V 40W, 85mm long heating rod, for V4.1B board version printer only
I need help I need j-head 700-001-1105 or failing that instructions to fit upgraded hotend
Date Added: 12/02/2019 by James Thomson
2pcs Tin-bronze M8 nut for Z axis
hello, it is for I3 series 3D printers. if you need for MeCreator 2, pls send email to sales@geeetec...
Date Added: 11/29/2019 by Jocelin Jia
10pcs 100Kohm NTC Thermistors for heated bed
hello, it is for heatbed, not for hotend. if you need for A10 hotend, pls send email to sales@geeete...
Date Added: 11/29/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
hello, 3d touch sensor, Australia Post tracking number is 33FJV708922401000930300.
yes, you need d...
Date Added: 11/29/2019 by Jocelin Jia
New Upgrade Tempered Glass Bed 3D Printer Platform, 235 x 235MM for A10/A10M/A10T/Mizar/Mizar Pro
hello, this is for A10/A10M printer, 235mm*235mm*4mm.
it depends, some customer prefer glass platfo...
Date Added: 11/29/2019 by Jocelin Jia
3D Printer MK8 Extruder Hot End Kit
yes, it can use on pro w printer
Date Added: 11/29/2019 by Jocelin Jia
10pcs 100Kohm NTC Thermistors for heated bed
Hello, can I use this thermistor for Geeetech A10 ? Is there anything else to do appart from wiring ...
Date Added: 11/28/2019 by Pierre-Yves Malengre
New Upgrade Tempered Glass Bed 3D Printer Platform, 235 x 235MM for A10/A10M/A10T/Mizar/Mizar Pro
Hello,
What are the size of Superplate Glass Platform.
Is it really better than mylar ?
regards
Date Added: 11/27/2019 by alex hainaut
2pcs Tin-bronze M8 nut for Z axis
Can i use these for the Z-Axis on my MeCreator 2?
Date Added: 11/25/2019 by Pascal Thümling
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi i have an a10m coming - will this go with it - is it a plug and play or will it need technical in...
Date Added: 11/24/2019 by Graham Brettle
3D Printer MK8 Extruder Hot End Kit
will this work with the Geetech i3 pro w ?
Date Added: 11/24/2019 by Lucas Schumann
10pcs 100Kohm NTC Thermistors for heated bed
hello, it is not the same, but can use it
Date Added: 11/23/2019 by Jocelin Jia
3D Printer Brass M6 nozzle for MK8 extruder/0.3mm
hello, it is not compatible for E180. you can order this nozzle, and leave a comment for your order ...
Date Added: 11/23/2019 by Jocelin Jia
Superplate Glass Platform 220mm*220mm*4mm
this glass size is 220mm*220mm*4mm, for pro b , you can buy sku 700-001-0303 210mm*200mm*3mm
Date Added: 11/23/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Very good service thank you
Date Added: 11/23/2019 by Terry King
Superplate Glass Platform 220mm*220mm*4mm
the ad says for I3 Proc B but it is too big and hits the table lvling screws heads. I would have to ...
Date Added: 11/22/2019 by Joseph Bina
10pcs 100Kohm NTC Thermistors for heated bed
Is this Thermistor the Same as the hotend thermistor for Geeetech A30?
Date Added: 11/20/2019 by Udo Hanf
3D Printer Brass M6 nozzle for MK8 extruder/0.3mm
is it compatible for Geeetech E180
Date Added: 11/20/2019 by Pg suffian said
V3.0/V3.1 Extruder Small Circuit Board Extension Board for A20 A20M A30 A10 A10M
Thanks!
Date Added: 11/13/2019 by Ivan Enriquez Granda
3D Printer MK8 Extruder Hot End Kit
yes, but it is not listed on the store, pls send email to sales@geeetech.com , will arrange offline ...
Date Added: 11/12/2019 by Jocelin Jia
Stepper motor wire
hello, pls send a photo of the parts you are looking for to sales@geeetech.com, will check for you, ...
Date Added: 11/12/2019 by Jocelin Jia
A20 A20M A20T Mizar S Super Plate Glass Platform For Thunder , 260*260mm
if you are going to use the superplate glass to replace the black mylar sticker, one tip need your a...
Date Added: 11/12/2019 by Jocelin Jia
A20 A20M A20T Mizar S Super Plate Glass Platform For Thunder , 260*260mm
hello, yes , it can replace mylar sticker as printing platfrom.
Date Added: 11/12/2019 by Jocelin Jia
Stepper motor 42SHD0227-24B
hello,could you please send more details to technical@geeetech.com
Date Added: 11/12/2019 by Jocelin Jia
A10 A20 A30 MK8 Extruder feeder Kit for 1.75mm filament
Hi, pneumatic fitting is not listed on the store, if you need them pls send email to sales@geeetech....
Date Added: 11/12/2019 by Jocelin Jia
Stepper motor 42SHD0227-24B
Hi, in the spec datasheet i can see 0,4A, can you confirm me the right one for my driver vref ?
Date Added: 11/12/2019 by David TOUTON
A20 A20M A20T Mizar S Super Plate Glass Platform For Thunder , 260*260mm
Is this an alternative to the mylar sticker?
Date Added: 11/11/2019 by Chris Findlay
Stepper motor wire
What is the exact model and type of the 6 pin connector please. It looks to be JST XH 2.54mm 6 pin m...
Date Added: 11/11/2019 by H Coeleveld
3D Printer MK8 Extruder Hot End Kit
Is there a G2S Pro hot end replacement available?
Date Added: 11/10/2019 by Joel Dunn
V3.0/V3.1 Extruder Small Circuit Board Extension Board for A20 A20M A30 A10 A10M
hello, your order is on transit, China post tracking number: RV216493975CN
post shipping usually ta...
Date Added: 11/08/2019 by Jocelin Jia
A10 A20 A30 MK8 Extruder feeder Kit for 1.75mm filament
Hi! What type is the pneumatic fitting? Thanks
Date Added: 11/07/2019 by Herbak Istvan
V3.0/V3.1 Extruder Small Circuit Board Extension Board for A20 A20M A30 A10 A10M
Hello I ordered this, and the tracking page doesn't show any changes since october 27
Date Added: 11/07/2019 by Ivan Enriquez Granda
A10/ A10 Pro/ A20/ A30 Pro 24V Printing Head, Single Extruder Hotend, 24V 40W, 85mm long heating rod, for V4.1B board version printer only
hello, if you choose registeredmail shipping for your order, will ship by general China post, need a...
Date Added: 11/06/2019 by Jocelin Jia
A10M A20M 2 in 1 out dual extruder hotend, 24V 40W, 85mm long heating rod
hello, this is 2-in 1 out hotend, can not be used on A20. you can buy printing head 700-001-1121 for...
Date Added: 11/06/2019 by Jocelin Jia
A10/ A10 Pro/ A20/ A30 Pro 24V Printing Head, Single Extruder Hotend, 24V 40W, 85mm long heating rod, for V4.1B board version printer only
hello, if your A30 J head does not look this one, you can order this but pls leave a comment for you...
Date Added: 11/06/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
yes, it can used on A20, if need use 3d touch, pls go to our website-download- A20 download the fort...
Date Added: 11/06/2019 by Jocelin Jia
Assembled MK8 extruder
hello, it can not be used on mecreator, you need SKU 700-001-0947, it is not listed on the website,i...
Date Added: 11/06/2019 by Jocelin Jia
V3.0/V3.1 Extruder Small Circuit Board Extension Board for A20 A20M A30 A10 A10M
hello, this is for A10 A10M, A20 A20M. you can order this and leave a comment for your order that yo...
Date Added: 11/05/2019 by Jocelin Jia
Assembled MK8 extruder
is this compatible with the MeCreator2?
Date Added: 11/04/2019 by Craig Mounsey
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Si può montare sulla a20? bisogna fare modifiche sul firmware?
Date Added: 11/03/2019 by Aldo Mantua
A10/ A10 Pro/ A20/ A30 Pro 24V Printing Head, Single Extruder Hotend, 24V 40W, 85mm long heating rod, for V4.1B board version printer only
Why is this hotend so different to the J Head on my A30 and how could it be fitted?
Date Added: 11/02/2019 by Tim Edwards
A10M A20M 2 in 1 out dual extruder hotend, 24V 40W, 85mm long heating rod
Ciao si può montare anche sulla a20? o si devono fare delle modifiche? grazie
Date Added: 11/01/2019 by Aldo Mantua
A10/ A10 Pro/ A20/ A30 Pro 24V Printing Head, Single Extruder Hotend, 24V 40W, 85mm long heating rod, for V4.1B board version printer only
cuanto tarda en llegar a colombia?
Date Added: 10/30/2019 by Cristian Salguero
V3.0/V3.1 Extruder Small Circuit Board Extension Board for A20 A20M A30 A10 A10M
Does this work on the A30? The item name says, "yes," but the Product Info and other comment below s...
Date Added: 10/26/2019 by David Rayle
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hi, i've bought this feeder to replace the plastic one i got with the I3 pro B.
I've assembled it b...
Date Added: 10/14/2019 by Marco Paglioni
1 Meter 2GT Belt (sold by meter)
yes, it can used on a30
Date Added: 10/10/2019 by Jocelin Jia
A20 A20M A20T Mizar S Super Plate Glass Platform For Thunder , 260*260mm
hello, glass dimension is 260mm*260mm*4mm, the output voltage of A20M heatbed is 24V
Date Added: 10/10/2019 by Jocelin Jia
1 Meter 2GT Belt (sold by meter)
Hello, this belt is good for A30? Thank you
Date Added: 10/03/2019 by Pietro Casciano
A20 A20M A20T Mizar S Super Plate Glass Platform For Thunder , 260*260mm
Hello. What are the sizes of glass and the voltage?
Date Added: 09/30/2019 by ViPo Ponomaryov
3D Printer MK8 Extruder Hot End Kit
hello, this will not work with pro c printer, pls send email to us, will arrange for you, sales@geee...
Date Added: 09/18/2019 by Jocelin Jia
3D Printer MK8 Extruder Hot End Kit
Hello, will this work to replace the hot end on the acrylic i3 pro c printer?
Date Added: 09/18/2019 by BlueSandbox Sandbox
Displaying 2401 to 2500 (of 3673 reviews)
.jpg "Nema17 Stepper motor 42SHD3418-24B15")
TOP