X
This is an MK8 Extruder Aluminum feeder Kit for 1.75mm filament.
only available for short distance , can be used on A10 A20 A30 printer .
can not be used on A10M A20M A30M .
1 x extruder base
1 x tension lever
1 x 694zz U-groove Idler wheel
1 x 694zz bearing
1 x bearing cover
1 x Brass drive gear
1 x Push-in Fitting
1 x High tension spring
1 x Assembly screw set
1 x screw sleeve
Please note that stepper motor and cooling system is not included.
TOP
Can Ibisen this also for i3 Pro B ? Or which one can I use. My original plastic extruder is broken.
Dear customer, you can contact our technical supports mailbox : support@geeetech.com or create a ticket on our official website ,hope you have a good day .
Hi, yes, it can be used for Pro B.
How do I fit this to my i3 Pro B ???? Is there a video to demonstrate ?
Is this the correct item for the A30T ???
Ok, so does that mean you don’t sell an all metal kit for the A30T
no, this is for single extruder printer like A10 Pro , A20, A30 Pro. for A30T printer , pls order SKU: 800-001-0558 https://www.geeetech.com/a10m-a20m-a30m-titan-extruder-feeder-kit-for-175mm-filament-p-1145.html
So, does that mean you do not sell an all metal kit for the A30T? The kit you suggest seems to only for models ending with the letter “M” it’s a bit confusing
yes, do not have an all metal one for A30T
800-001-0558 can also be used on T series printer.
My apologies if I’m being too pedantic, but, does this unit fit the A30T. I see you mention A30 and exclude the models ending in ‘M’ but I can’t see mention of models ending in ‘T’
no, this is for single extruder printer like A10 Pro , A20, A30 Pro. for A30T printer , pls order SKU: 800-001-0558
You state that the A10M requires a long-distance version of the Mk8 extruder upgrade. Why do you not offer this variant on your website? Where can I obtain the additional Push-in Fitting shown in the "MK8 feeder building instruction.pdf" document downloaded from this webpage?
Hi, this is for A10, A20, A30 printer. we do not have aluminum feeder kit for A10M A20M yet. if you need the push-in fitting in this A10 aluminum kit , you can send an email to sales@geeetech.com
Will this work with the mecreator 2?
helo, no , can not use on mecreator 2, this can only work with A10, A20, A30 printer
Will this MK8 feeder work with A10 3d printer?
hello,yes, this can work with A10, A20, A30
Hi, i've bought this feeder to replace the plastic one i got with the I3 pro B. I've assembled it but i have a problem in putting it in place. The screw that holds the spring in the bottom of the metal feeder does not fit in the hole i have in the plastic base of the feeder (the one besides the hot end rod hole) because the two holes are nearer than the 2 screw/hot end rod. I mean, when i'm going tu put the mk2 in the base of the carriage of the X axis, the screw on the bottom of the feeder has no place to stay, and i cant put the whole Mk8 in place. Why? I have no replacement for that plastic part with holes more far one from another, and i don't see it in the online shop either.
Hi, I installed it to my A10M, now I need to adjust the speed and the steps mm because the big tooth wheel is missing. Do you have some values or config for me regarding the right feed rate?? Thanks
hello , pls adjust the steps into 93, do not need adjust the speed
Hello, is it possible to use this to upgrade a20m?
hello,this can not used on a20M,it is for A10,A20, A30
yes, this will work for A30
So this will work for the Geeetech A30 with the 320mms by 320mms by 420mms just so I am 100% sure
hi, i installed this at my a10m but now the extruder moves the wrong way, its unfeeding the filament when i am trying to print. how can i change that?? change the wires? any gcode to do that?? hope you can help. thanks
i suggest you change direction of the feeder kit
Hi, can I use this kit for Mecreator2?
yes
I have a printer A10M and want to change the two extruder feeders what must I order ?
This feeder kit can use
Does this fit the A20M and which option?
please send mails to victory.lei@geeetech.cn, he will arrange it offline, thanks
please choose short distance, thanks
Hi what's the difference between short distance extruder and long distance extruder I have a aluminum i3 Which do I need? Cheers
which version do i need for an extruder from prusa i3 x pro?
extruder or feeder kit?
Will this fit an e180?
yes, it can use it but need change two longer screws, thanks
My A30 extruder arm broke, and I am not able to print a replace, so I bought this hoping that the metal one es better. Can you confirm when will be shipped order 20180907094614506? thanks
RS284421371DE DHL
Can you tell me if this fits the A10 and which one is required? thanks
please choose long distance, right or left is both ok.
What does it mean short/long distance? What is fitting for original https://www.geeetech.com/new-mk8-extruder-p-998.html ?
hello, please send mails to victory.lei@geeetech.cn and tell him which printer you use, thanks
how do you buy a metallic feeder for the m201? (not that crappy plastic one it comes standard)just with the number 700-001-0933 ... I cant find it ANYWHERE
hello, please send mails to victory.lei@geeetech.cn,we will arrange it offline
Hi, I am having issues with the feeder on my M201 but your comment to Eric says this kit does not fit M201,the feeder Kit SKU of M201 is 700-001-0933. but you do not list it? Is it an Aluminium kit and does it allow more grip to the filament? Thanks.
Hi Simon,we don't list the feeder kit for M201，it is plastics,you can email:victory.lei@geeetech.cn to purchase it.Thanks.
does not fit ! is too large and screws does not fit on motor.
Hi michele,sorry for late reply.Aluminum feeder Kit is different from plastic feeder Kit,if you have any problem,please email me:jocelin.jia@geeetech.cn,I will help you.Thanks
Can i use this on my i3 pro b? it has If so, do i need left or right? I need this upgrade, because the extruder sent is plastic, and keeps slipping / clicking, and ruining prints.
Hi Chris,sorry for late reply.yes,you should choose the short distance and right hand one.If you have any problem,please email me:jocelin.jia@geeetech.cn,I will help you.Thanks
Hi, I just wanted to check if this product fits my Prusa i3 M201 Dual?
Hi Eric,sorry for late reply.This not fit M201,the feeder Kit SKU of M201 is 700-001-0933.Thanks.
it's compatible with the geeetech A30? for left hand or right hand? thank
Hi,it is left for long distance.Thanks
How to install on Geeetech pro W Prusa I3? It does not seem to fit.
Hi Tamara,sorry for late reply.Could please email me more details:jocelin.jia@geeetech.cn,I will help you.Thanks
Hello, There is no morre tracking information .... It was available at the order point in time !!! What is going on ?
Hi Rene ,could you pls send me your order number to check ?
Is it possible to get the brass drive gear from a more resistant material, mine is dented and I don't think that a new brass one will last for long.
Hi Philipp ,could you pls send to my email:zina.luo@geeetech.cn
Hy, for the i3 Pro C I need left and right hand but short or long?
Hi Bruno,for the pro C is right and left for short distance one .
I find many discritions and videos how to assemble that feeder but no description how to mount it on the printer is there an description you can post me ?
Hi Harald ,you can try this https://www.geeetech.com/Documents/MK8%20feeder%20building%20instruction.pdf
Hello, wich one should I order for the prusa I3X? Thanks.
Hi Martel,it's the short distance and right hand by 1.75mm one ,you can remark that you used on pro X ,and the sales will arrange the right one to you.PLs note with thank.
Hello I also have a prusa i3 pro b and I need the right hand 3mm extruder. I accidentally order the left hand one. What do you suggest? I see that the right hand is not available. Is there a way to adapt the left hand one?
Hi,if you buy the left hand ,you just need to change the filament diection and you can take this for reference :http://www.geeetech.com/forum/viewtopic.php?f=17&t=17037
hello i have prusa i3 pro b with mk8 extruder. which one is the correct feeder kit? right or left? short distance or long distance?
Hi ,you should choose the short distance and right hand one .
Where do you send the products from? I need them to be sent from Europe so I don`t have to go to the customs office.
Hi Edmond,it will be shipped from China and you can choose the small mail and no need to pay for the customs .
Hi, where can I find assembly instructions for rhis kit?
Hi Oli,you can email to our technican for help:technical@geeetech.com
Will the short-distance right hand set fit the Geeetech Rostock 301 extruders?
Hello David ,sorry that need the long distance right hand one .
will this fit the mecreator 2 extruder?
yes ,the short distance and right hand one is suitable .
Hi, as far as I can see the left hand kit is not compatible with Prusa i3 Pro B as the motor would interfere with X axis end stop. Is the right hand kit back in stock ? I had no problems adding one to my shopping cart.
Hi,The short distance right hand one now have stock ,you can order it.
Hi, Are the tension lever, idler wheel, bearing & cover compatable with the plastic mounting bracket from the plastic version of the extruder (SKU 800-001-0461). My tesion lever has broken on my Prusa i3 Pro B aand I would rather replace it with metal if possible (but didn't want to take off the mounting plate, just replace the lever). Thanks Alan
Hello Alan,the Aluminum feeder has different bearing between the plastic one ,so need purchse the whole feeder.
Hello, i need the feeder kit for my Delta Rostock mini G2S pro. Since there are 2 extruders, i need the left and right version but the right is not available, so is the left compatible with the right one? And if it's not compatible when the right one will be available? Thanks in advance.
hello Duilio,if you used 2 left hand it's too closed for the 2 extruders to print.The long distance right hand is out of stock .
I need both sides for my i3 Pro C. When will the right hand feeders be back in stock?
Hi, I want to change the plastic feeder of my "Geeetech Acrylique Reprap Prusa I3 Pro B" single extruder 1.75mm, for this "MK8 Extruder Aluminum feeder", which is the type that I need? Thanks in advance.
Hello Gustavo, Short distance extruder for 1.75mm (left hand) is compatible.
Hello. Ive ordered the left hand one you suggested, howecer this doesnt fit the geeetech i3 pro b. Please help
Hello,Actually,you can modify the direction of your extruder in the firmware then upload it. And you don't need to change the lever to the right side,just keep its original place(the left side).
Hello, I need the feeder kit (both 1.75 mm and 3 mm) right hand-hand. But I see they are currently unavailable. Do you have any idea, when they can be available again? If so, can you please include my name in the watch list to let me know as soon as it's available? Thanks.
Hello Mohammad,can you please tell me on which printer you need to use this? I will see if the left hand ones are compatible.
Hi, i have your famous I3A Pro Alu with one extruder, what is the good option for this feeder ? Is it : Short distance left hand ? Thank you.
Short distance right hand is out of stock, but for your printer, Short distance left hand is also ok.
Hi, I want to bought it with option Short distance extruder for 1.75mm right hand but I can only choose with left hand. Right hands are they still available ?
Hello Calvez,can you please tell me on which printer you need to use this? I will see if the left hand ones are compatible.
Hi, you have sent me wrong baring dimension. also screw does not fit. please help
i am sorry to hear that, pease contact our sales for replacement. sales@geeetech.com
Hi, is this feeder compatible with a MeCreator 2 printer?
could you please show me how this goes together? The bearing is too small the way i see it?
pour le moment les pièces semble être de bonne qualités, mais petit problème avec le roulement a bille qui n'es pas de la bonne grandeur
what size of the ball bearing do you receive please?
1 x 693zz bearing que j’ai reçu au-lieu de 1 x 694zz bearing
i am sorry to hear that, pease contact our sales for replacement. sales@geeetech.com