Reviews
Displaying 1901 to 2000 (of 3673 reviews)
A30T Smartto_MB_V1.0 Control Board
Why is my order pending for several days still
Date Added: 08/24/2022 by Bruce Pigman
LCD 2004 Screen for A10 A10M A10T with GT2560 V3.1 or V4.0 Board, 2*10 Pin LCD Cable Connector at Backside of the Screen
I have an A10 with the old V3.0 mainboard and the screen doesn’t work. Is there a way I can upgrade ...
Date Added: 08/24/2022 by Jasen King
PLA Luminous Purple 3D Printer Filament 1.75mm 1kg/roll
hello,The luminous filament itself indeed looks white/transparent, it will glows in the dark only af...
Date Added: 08/23/2022 by Geeetech Staff
PLA Gradient Colour 3D Printer Filament 1.75mm 1kg/roll
hello, we shipped PLA green and super plate glass together , DHL paket : CS829673756DE
then PLA Col...
Date Added: 08/23/2022 by Geeetech Staff
PLA Luminous Purple 3D Printer Filament 1.75mm 1kg/roll
Buon giorno, l’ordine è arrivato con una bobina errata . Glow purple non è del colore giusto. La bob...
Date Added: 08/22/2022 by Andrew Zenobi
PLA Gradient Colour 3D Printer Filament 1.75mm 1kg/roll
j ai bien rec u les deux autre bobine et le plateau super plate pour la A30PRO
Date Added: 08/22/2022 by vincent lefebvre
PLA Gradient Colour 3D Printer Filament 1.75mm 1kg/roll
hello
PLA Color Gradient and Water Blue were shipped together,La Poste tracking number : 6A219269...
Date Added: 08/22/2022 by Geeetech Staff
LCD 2004 Screen for A10 A10M A10T with GT2560 V3.1 or V4.0 Board, 2*10 Pin LCD Cable Connector at Backside of the Screen
If the LCD is not on, check whether there is backlight, and check whether there are 3 lights on the ...
Date Added: 08/22/2022 by Geeetech Staff
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
Mizar S nozzle is not listed on our website yet , you can order this one , but write a comment for y...
Date Added: 08/22/2022 by Geeetech Staff
PLA Gradient Colour 3D Printer Filament 1.75mm 1kg/roll
a ce jour je n est pas recu la bobine
Date Added: 08/21/2022 by vincent lefebvre
LCD 2004 Screen for A10 A10M A10T with GT2560 V3.1 or V4.0 Board, 2*10 Pin LCD Cable Connector at Backside of the Screen
How do I know if my screen is bad or if it is the ribbon cable? The screen does not come even though...
Date Added: 08/21/2022 by Jasen King
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
Is this also for Mizar S?
Date Added: 08/20/2022 by Peter Chung
GEX01 Dual-drive Gear Extruder
hello, it is not a direct replacement. need do some change according to manual that will come the th...
Date Added: 08/19/2022 by Geeetech Staff
GEX01 Dual-drive Gear Extruder
Is this a direct replacement for the original Mizar S extruder?
Date Added: 08/18/2022 by Dennis Ball
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
you are welcome
Date Added: 08/16/2022 by Geeetech Staff
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
Thanks :)
Date Added: 08/15/2022 by Filippo Bosi
PETG White 3D Printer Filament 1.75mm 1kg/roll
Thanks a lot for your supports, Julius
Date Added: 08/15/2022 by Geeetech Staff
PETG White 3D Printer Filament 1.75mm 1kg/roll
I ordered this filament yesterday and today it already came with DHL. I directly tested it and achie...
Date Added: 08/14/2022 by Julius Bonacker
A30T Smartto_MB_V1.0 Control Board
hello, they have different connectors , you need to check which one does your printer originally has...
Date Added: 08/12/2022 by Geeetech Staff
A30T Smartto_MB_V1.0 Control Board
Hi _br_Would you please let me know what is the difference between, A30T Smartto_MB_V1.0 Control Boa...
Date Added: 08/12/2022 by Mohammad Seddighi
A10Pro//A10M/A10T hotend to GT2560 V4.1B Control board link cable
hello, yes, we have shipped another out, China post tracking number : ID15257697028465CN
you can tr...
Date Added: 08/10/2022 by Geeetech Staff
A10Pro//A10M/A10T hotend to GT2560 V4.1B Control board link cable
I was told you guys will send another cable that was apparently lost. My order NO:20220408142215696,...
Date Added: 08/09/2022 by Lavell Hampton
Assembled MK8 extruder
Hello, here is the information:
Cooling Fan (150mm cable length) 40x40x10mm-DC12 v,6000RPM, 2-pin r...
Date Added: 08/09/2022 by Geeetech Staff
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
Sorry we don't have 0.6mm nozzle
Date Added: 08/09/2022 by Geeetech Staff
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
Hi is it possible to have 0.6 nozzle instead of 0.4? I cannot find them on the store
Date Added: 08/06/2022 by Filippo Bosi
Assembled MK8 extruder
Hi, I have a question, what are the specific models of the cooling fan and the hot end? Or could you...
Date Added: 08/06/2022 by Cesar Rivera
1m PTFE Teflon Tube Pipe 2*4mm For Filament
hello, you can order via this link directly.
or you need other ptfe tube which is different from th...
Date Added: 08/03/2022 by Geeetech Staff
1m PTFE Teflon Tube Pipe 2*4mm For Filament
I have a geeetech i3 printer and the hot end ptfe tube is blocked. it is for 1.75 filament. can you ...
Date Added: 08/03/2022 by kingsley burn
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
hello, no ,this is not compatible. if you need nozzles for MeCreator 2 printer , you can order this ...
Date Added: 08/02/2022 by Geeetech Staff
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
Is it compatible for the MeCreator 2???
Date Added: 08/01/2022 by James Prendergast
Titan extruder kit for A10M A10T A20M A20T A30M A30T
hello, we only have aluminum feeder kit for single extruder printer . do not have it for dual /tripl...
Date Added: 07/30/2022 by Geeetech Staff
A20/M/T 12864 LCD Screen for GT2560 V4.0 Version Control Board, with 20 Pin LCD Cable Connector at Backside of the Screen
hello, we do not have stock for V3.0 V3.1 control board anymore.
not sure if V4.0 board will be co...
Date Added: 07/30/2022 by Geeetech Staff
Titan extruder kit for A10M A10T A20M A20T A30M A30T
Bonjour . Par quel produit en aluminium puis--je remplacer la partie entrainement filament si je gar...
Date Added: 07/30/2022 by jose garcia
A20/M/T 12864 LCD Screen for GT2560 V4.0 Version Control Board, with 20 Pin LCD Cable Connector at Backside of the Screen
Hi I have a GT2560 Version 3.0 control board fitted. Can i fit a version 4.0 or 4.1 board to this pr...
Date Added: 07/29/2022 by Bernard Edmonds
Stepper motor 42SHD0217-24BF
Yes
Date Added: 07/27/2022 by Geeetech Staff
Stepper motor 42SHD0217-24BF
Is it coming with the cable?
Date Added: 07/27/2022 by habil mohammed
Stepper motor 42SHD0430-24B
Hello Michael, please create a ticket and contact with our technical colleague directly.
https://ww...
Date Added: 07/26/2022 by Geeetech Staff
5pcs * Nozzle for A10M A20M A30M, A10T A20T A30T Printer, 0.4mm nozzle,Screw thread M7
Hello, Marco, it already reach Netherlands,please wait for a few days, it will be reached in soon, h...
Date Added: 07/26/2022 by Geeetech Staff
A10T A20T A30T 3 in 1 out hotend kit
Hello, Sergey,please kindly send the message to this e-mail:sales@geeetech.com, so that we will send...
Date Added: 07/26/2022 by Geeetech Staff
5pcs * Nozzle for A10M A20M A30M, A10T A20T A30T Printer, 0.4mm nozzle,Screw thread M7
RG002529008CN take contact to post.nl ask them where the pachage is not deleverd._br__br_Gr. Marco
Date Added: 07/25/2022 by Marco Kersten
PLA Brown 3D Printer Filament 1.75mm 1kg/roll
Sorry, Joao, the filament don't have RGB codes
Date Added: 07/25/2022 by Geeetech Staff
PLA Black 3D Printer Filament 1.75mm 1kg/roll
Thanks a lot for your support Patrik, I will feedback your suggestion to our company
Date Added: 07/25/2022 by Geeetech Staff
Stepper motor 42SHD0430-24B
Bonjour,_br_faut-il régler la tension sur le driver qui est a 1.051v si on change le moteur._br_merc...
Date Added: 07/24/2022 by michael SAVOYE
PLA Black 3D Printer Filament 1.75mm 1kg/roll
Sehr gutes Filament._br_Nutze es jetzt schon sehr lange und habe nur sehr selten Probleme gehabt. Di...
Date Added: 07/22/2022 by Patrik Tinnemeyer
PLA Brown 3D Printer Filament 1.75mm 1kg/roll
is there any way to get the RGB codes for the filament colors? trying to achieve the color code whil...
Date Added: 07/22/2022 by João Xabregas
A10T A20T A30T 3 in 1 out hotend kit
hello, can you write the parameters of the cold and hot zone separation plate. I want to make it fro...
Date Added: 07/22/2022 by Sergey Mayorov
A10Pro//A10M/A10T hotend to GT2560 V4.1B Control board link cable
sorry , seems it was lost as i can not track it via tracking number . will resend a parcel out .
h...
Date Added: 07/20/2022 by Geeetech Staff
A10Pro//A10M/A10T hotend to GT2560 V4.1B Control board link cable
Trying to locate my order NO:20220408142215696
Date Added: 07/20/2022 by Lavell Hampton
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
Hello, Steven, you can order SKU: 700-001-0969
https://www.geeetech.com/geeetech-3d-touch-v32-auto...
Date Added: 07/19/2022 by Geeetech Staff
A10/ A10 Pro/ A20/ A30 Pro 24V Printing Head, Single Extruder Hotend, 24V 40W, 110mm long heating rod, for V3.0/ V3.1/ V4.0 board version
hello, you can order below. SKU: 700-001-1423
https://www.geeetech.com/a10-a10-pro-a20-a30-pro-24v-...
Date Added: 07/19/2022 by Geeetech Staff
Geeetech 3D Touch V3.2 Auto Leveling Sensor
You are welcome, thanks a lot for your support, Neal
Date Added: 07/19/2022 by Geeetech Staff
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
You are welcome, thanks a lot for your support, Neal
Date Added: 07/19/2022 by Geeetech Staff
Pneumatic Push Fitting PC4-M8*1.25, Used for A10M A20M A30M, A10T A20T A30T Mix Color 3D Printer, Compatible for Both Hotend and Extruder of These Mix Color Printers
Thanks a lot for your support, Neal
Date Added: 07/19/2022 by Geeetech Staff
1m PTFE Teflon Tube Pipe 2*4mm For Filament
You are welcome,Neal, thanks a lot for your support
Date Added: 07/19/2022 by Geeetech Staff
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
Does this sensor works with the "older" Geeetech A30 printer (hardware version 3.3 and firmware vers...
Date Added: 07/19/2022 by Steven Achilles
1m PTFE Teflon Tube Pipe 2*4mm For Filament
exactly what i needed,thanks
Date Added: 07/19/2022 by Neal Hennessey
Pneumatic Push Fitting PC4-M8*1.25, Used for A10M A20M A30M, A10T A20T A30T Mix Color 3D Printer, Compatible for Both Hotend and Extruder of These Mix Color Printers
arrived on time ,very happy
Date Added: 07/19/2022 by Neal Hennessey
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
once again the items arrived in good condition and on time,thank you geeetech.
Date Added: 07/19/2022 by Neal Hennessey
Geeetech 3D Touch V3.2 Auto Leveling Sensor
the item arrived in good condition and on time,thanks
Date Added: 07/19/2022 by Neal Hennessey
A10/ A10 Pro/ A20/ A30 Pro 24V Printing Head, Single Extruder Hotend, 24V 40W, 110mm long heating rod, for V3.0/ V3.1/ V4.0 board version
How do I know which hot end to purchase. I have an a30 pro Hardware V1.7 with Smartto MB V1.0 and se...
Date Added: 07/18/2022 by John Evans
2pcs* 4020/DC 24V Cooling Radial Turbo Blower Fan with 120mm cable
yes,it fits A10. will send the fan duct to your email.
Date Added: 07/13/2022 by Geeetech Staff
2pcs* 4020/DC 24V Cooling Radial Turbo Blower Fan with 120mm cable
Good morning_br_Will this part fit a10. Also need file for bottom duct please_br_Regards: Andre
Date Added: 07/13/2022 by Andre de Jong
Acrylic Prusa I3 PRO B 3D Printer DIY kit
hello, do you want to order PRO B printer lcd screen ? it is not listed on our store , pls order bel...
Date Added: 07/11/2022 by Geeetech Staff
PLA Black 3D Printer Filament 1.75mm 1kg/roll
Thanks a lot for your support, Niklas
Date Added: 07/11/2022 by Geeetech Staff
Acrylic Prusa I3 PRO B 3D Printer DIY kit
hi what lcd screen in i3b for marlin please
Date Added: 07/10/2022 by Crispin Church
A10Pro//A10M/A10T hotend to GT2560 V4.1B Control board link cable
sorry , do not have stock for V3.0 board hotend cable anymore
Date Added: 07/05/2022 by Geeetech Staff
PLA White 3D Printer Filament 1.75mm 1kg/roll
Hi Niklas， Thank you for your support and trust
Date Added: 07/05/2022 by Geeetech Staff
PLA White 3D Printer Filament 1.75mm 1kg/roll
Good quality. Thank you
Date Added: 07/05/2022 by Niklas Weimann
A10Pro//A10M/A10T hotend to GT2560 V4.1B Control board link cable
Wondering if you have have the hotend cable for GT2560 V3.0?
Date Added: 07/04/2022 by Brody De Jager
A20M GT2560 V4.0 Control Board, before order pls check which board does your printer has
We don't have such update kits.
And we don't suggest to modify the 3d printer, we couldn't provide ...
Date Added: 07/04/2022 by Geeetech Staff
A20M GT2560 V4.0 Control Board, before order pls check which board does your printer has
How do I add a second z axis?
Date Added: 07/03/2022 by Michele Siracusa
PLA Black 3D Printer Filament 1.75mm 1kg/roll
sorry , we do not have Simplify3D file. you can refer to cura's configuration file
https://www.geee...
Date Added: 07/01/2022 by Geeetech Staff
PLA Black 3D Printer Filament 1.75mm 1kg/roll
May I get the Simplify3D pla profile as well. I have the new black and new white.
Date Added: 06/30/2022 by Otto Dieffenbach
A10Pro A10M A10T Magnetic Flexible Removable Printing Platform
hello , the size is too big for Pro C printer. if you would like to try cutting into right size by y...
Date Added: 06/30/2022 by Geeetech Staff
A10Pro A10M A10T Magnetic Flexible Removable Printing Platform
Is it pssible to use this printing plattform with a Prusa I3 PRO C Dual Extruder?_br_Can I cut it to...
Date Added: 06/29/2022 by Werner Vollmer
Nema17 Stepper motor 42SHD3418-24B15
hello, you can order sku : 700-001-0999
https://www.geeetech.com/stepper-motor-42shd022724b-p-10-
71....
Date Added: 06/28/2022 by Geeetech Staff
A10T A20T A30T 16 Pin Connector hotend group assembly with pulley bracket for GT2560 V4.1B Version
hello, you can order SKU: 800-001-0729 , it is correct 16 pin hotend group for A30T with GTM32_103 b...
Date Added: 06/28/2022 by Geeetech Staff
Nema17 Stepper motor 42SHD3418-24B15
I need stepper motors 42SHD0227-24B1. What should I order for this?
Date Added: 06/27/2022 by Adam Garcia
A10T A20T A30T 16 Pin Connector hotend group assembly with pulley bracket for GT2560 V4.1B Version
Hallo Geeetech_br__br_ich benötige für den Drucker A30T einen 16 Pin Connector Hotend-Gruppenbaugrup...
Date Added: 06/27/2022 by Erwin Hanelt
A30 PRO A30M A30T Super Plate Glass
hello, it is 330mm*330mm*4mm
Date Added: 06/22/2022 by Geeetech Staff
A10Pro//A10M/A10T hotend to GT2560 V4.1B Control board link cable
yes, pls generate an order for it , and writte comment on your order page. so i can process your ord...
Date Added: 06/22/2022 by Geeetech Staff
PLA Silk Rainbow 3D Printer Filament 1.75mm 1kg/roll
hello Tyler, it was shipped separately , UPS tracking number : 1Z4X554V0302769058
you can track it...
Date Added: 06/22/2022 by Geeetech Staff
PLA Silk Rainbow 3D Printer Filament 1.75mm 1kg/roll
Didnt show up in my order very disappointed it shows i paid for it as well
Date Added: 06/22/2022 by Tyler Jennings
A10Pro//A10M/A10T hotend to GT2560 V4.1B Control board link cable
Brauch stattdesen folgende Kabel need A20T three extruders cable 37-001-0376 instead
Date Added: 06/21/2022 by Kai Diehl
A30 PRO A30M A30T Super Plate Glass
Can you please provide size of the glass?
Date Added: 06/21/2022 by Vladimir Gavrilov
Pneumatic Push Fitting PC4-M8*1.25, Used for A10M A20M A30M, A10T A20T A30T Mix Color 3D Printer, Compatible for Both Hotend and Extruder of These Mix Color Printers
hello, yes, pls write a comment for your order , need it for A10 printer instead . yes, i have seen...
Date Added: 06/20/2022 by Geeetech Staff
Stepper motor wire
hello, seems you need extruder cable . it is not listed on our store ,pls contact sales@geeetech.com...
Date Added: 06/20/2022 by Geeetech Staff
Nema17 Stepper motor 42SHD3418-24B15
hello, you can order it , but write a comment for your order, need A20T motor ...instead ( you can c...
Date Added: 06/20/2022 by Geeetech Staff
Nema17 Stepper motor 42SHD3418-24B15
Passt der auf den A20T
Date Added: 06/19/2022 by Kai Diehl
Stepper motor wire
Es ist nicht für Achsen sondern für den Extruder 1(E0)
Date Added: 06/18/2022 by Kai Diehl
Pneumatic Push Fitting PC4-M8*1.25, Used for A10M A20M A30M, A10T A20T A30T Mix Color 3D Printer, Compatible for Both Hotend and Extruder of These Mix Color Printers
Hello, can I please get this for the A10.
Date Added: 06/18/2022 by Jake Mostowik
Stepper motor wire
Kai, is it for X axis, Y axis, or Z axis?
Date Added: 06/18/2022 by Geeetech Staff
Stepper motor wire
Danke für die schnelle Info hier die Daten_br_GT2560 V4.1 /Baud 250000 Fw V 2.2 HW V2.20 Protocol1_b...
Date Added: 06/18/2022 by Kai Diehl
Stepper motor wire
Hello, Kai
it is not suitable for A20T,please confirm your motherboard verson? And the wire for whi...
Date Added: 06/17/2022 by Geeetech Staff
1 Meter 2GT Belt (sold by meter)
yes , it fits
Date Added: 06/17/2022 by Geeetech Staff
10 pcs x Rubberized Bearing Pulley
yes, it fits Mizar S
Date Added: 06/17/2022 by Geeetech Staff
1 Meter 2GT Belt (sold by meter)
Does it fit Mizar S?
Date Added: 06/16/2022 by Peter Chung
10 pcs x Rubberized Bearing Pulley
Does it fit Mizar S?
Date Added: 06/16/2022 by Peter Chung
Stepper motor wire
Passt es beim A20t
Date Added: 06/16/2022 by Kai Diehl
V4.1B Board Version A10 PRO/A10M A20/A20M A30PRO/A30M Printer Extruder Extension Board
hello, seems no connectors available for multiple fans . pls check the second picture of the product...
Date Added: 06/14/2022 by Geeetech Staff
Displaying 1901 to 2000 (of 3673 reviews)
.jpg "Nema17 Stepper motor 42SHD3418-24B15")
TOP