Reviews
Displaying 2001 to 2100 (of 3673 reviews)
2pcs* 3010/DC 24V Cooling Fan for Extruder Hotend/ Control Board 30x30x10mm
hello
it is 0.1A, this fan spec is 3010A-DC24V-0.10A-10000RPM+/-10%.，PH2.0-2P
Date Added: 06/14/2022 by Geeetech Staff
Stepper motor 42SHD0217-24BF
hello, you can order any motor on our wesbite ,but write a comment for your order, need A20M motor 4...
Date Added: 06/14/2022 by Geeetech Staff
Stepper motor 42SHD0217-24BF
Need A20M stepper motor model: 42SHD0278-18A, do you have this plz? How much is it?
Date Added: 06/13/2022 by Habil Mohammed
V4.1B Board Version A10 PRO/A10M A20/A20M A30PRO/A30M Printer Extruder Extension Board
How much current (A) the fan port is providing plz? And can we connect multiple fans for the heat si...
Date Added: 06/13/2022 by Habil Mohammed
2pcs* 3010/DC 24V Cooling Fan for Extruder Hotend/ Control Board 30x30x10mm
How much current (A) the fan port on hot end board can provide plz?
Date Added: 06/13/2022 by Habil Mohammed
A10Pro//A10M/A10T hotend to GT2560 V4.1B Control board link cable
ok, noted. i have seen your comment about this on your order page. will send it to you
Date Added: 06/08/2022 by Geeetech Staff
Pneumatic Push Fitting PC4-M8*1.25, Used for A10M A20M A30M, A10T A20T A30T Mix Color 3D Printer, Compatible for Both Hotend and Extruder of These Mix Color Printers
Sorry,It don't have the full set.
When you place the order, please write a comment for which printe...
Date Added: 06/08/2022 by Geeetech Staff
A10Pro//A10M/A10T hotend to GT2560 V4.1B Control board link cable
Hi, I need the cable for A10M V4.0 board instead. Thanks
Date Added: 06/08/2022 by Steve Jones
Pneumatic Push Fitting PC4-M8*1.25, Used for A10M A20M A30M, A10T A20T A30T Mix Color 3D Printer, Compatible for Both Hotend and Extruder of These Mix Color Printers
Hallo, Gibt es die nur einzeln oder auch im Set. Im Set ist meistens günstiger.
Date Added: 06/07/2022 by Willi Gebh
A10Pro//A10M/A10T hotend to GT2560 V4.1B Control board link cable
hello, this is hotend cable connect from hotend to V4.1B version control board .
pls check which v...
Date Added: 06/06/2022 by Geeetech Staff
A10M A20M 2 in 1 out dual extruder hotend, 24V 40W, 85mm long heating rod
hello, pls order sku : 16-001-0033.
but write a comment for your order , need A10M printer heating...
Date Added: 06/06/2022 by Geeetech Staff
Pneumatic Push Fitting PC4-M8*1.25, Used for A10M A20M A30M, A10T A20T A30T Mix Color 3D Printer, Compatible for Both Hotend and Extruder of These Mix Color Printers
hello, you can order it and write a comment for your order , need push fitting for A30 PRO. we will ...
Date Added: 06/06/2022 by Geeetech Staff
A10M A20M 2 in 1 out dual extruder hotend, 24V 40W, 85mm long heating rod
I'd like to buy just the: 5. Heater cartridge: 24V, 40W; diameter & length: 6 *30mm_br__br_Is it ava...
Date Added: 06/05/2022 by Scott Forsyth
A10Pro//A10M/A10T hotend to GT2560 V4.1B Control board link cable
Hi there, I need a cable for the Geeetech A20, but I'm not sure this is the right one. Is this the l...
Date Added: 06/05/2022 by Andrea Parini
Pneumatic Push Fitting PC4-M8*1.25, Used for A10M A20M A30M, A10T A20T A30T Mix Color 3D Printer, Compatible for Both Hotend and Extruder of These Mix Color Printers
Hallo, ist die auch für den A30 Pro geeignet? Gruß Willi
Date Added: 06/03/2022 by Willi Gebh
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
800-001-0558 can also be used on T series printer.
Date Added: 05/31/2022 by Geeetech Staff
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
yes, do not have an all metal one for A30T
Date Added: 05/31/2022 by Geeetech Staff
Pneumatic Push Fitting PC4-M8*1.25, Used for A10M A20M A30M, A10T A20T A30T Mix Color 3D Printer, Compatible for Both Hotend and Extruder of These Mix Color Printers
Yes, it can be used for A20T
Date Added: 05/31/2022 by Geeetech Staff
Pneumatic Push Fitting PC4-M8*1.25, Used for A10M A20M A30M, A10T A20T A30T Mix Color 3D Printer, Compatible for Both Hotend and Extruder of These Mix Color Printers
Hello, can i used for the A20T serie?_br_Please answer._br__br_Gr. Marco
Date Added: 05/31/2022 by Marco Kersten
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
So, does that mean you do not sell an all metal kit for the A30T? The kit you suggest seems to only ...
Date Added: 05/30/2022 by John kelly
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Ok, so does that mean you don’t sell an all metal kit for the A30T
Date Added: 05/30/2022 by John kelly
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
no, this is for single extruder printer like A10 Pro , A20, A30 Pro.
for A30T printer , pls order ...
Date Added: 05/30/2022 by Geeetech Staff
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
no, this is for single extruder printer like A10 Pro , A20, A30 Pro.
for A30T printer , pls order ...
Date Added: 05/30/2022 by Geeetech Staff
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Is this the correct item for the A30T ???
Date Added: 05/28/2022 by John kelly
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
My apologies if I’m being too pedantic, but, does this unit fit the A30T. I see you mention A30 and ...
Date Added: 05/28/2022 by John kelly
A30T Smartto_MB_V1.0 Control Board
Yes, it has loaded
Date Added: 05/27/2022 by Geeetech Staff
A30T Smartto_MB_V1.0 Control Board
Hi does the board come with the firmware/software pre loaded?
Date Added: 05/27/2022 by Brian Thwaites
Filament Spool Holder
hello
it was shipped from China warehouse .China post tracking number : LE205294514CN
still need...
Date Added: 05/25/2022 by Geeetech Staff
Filament Spool Holder
I have not received the goods yet!_br__br_R Thiele
Date Added: 05/24/2022 by Reinhard Thiele
10pcs 100Kohm NTC Thermistors for heated bed
Yes, Joao, it can be used fro A10M hotbed
Date Added: 05/24/2022 by Geeetech Staff
10pcs 100Kohm NTC Thermistors for heated bed
Hello, can I use it on my A10M hotbed (GT2560 - V 3.0)?
Date Added: 05/23/2022 by JOAO ANTONIO VIEIRA DE MELO
A30M 2 in 1 out Y type dual extruder hotend
It is for A30M, so may not appplicable for A20M
Date Added: 05/23/2022 by Geeetech Staff
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello Marco,
Please kindly check your motherboard first,
If your motherboard is V4.1,please downl...
Date Added: 05/23/2022 by Geeetech Staff
A30M 2 in 1 out Y type dual extruder hotend
What does it need to modify this hot end for A20M?
Date Added: 05/22/2022 by Habil Mohammed
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi I have an A20 printer, which 3d touch firmware should I download?
Date Added: 05/22/2022 by Marco Manganelli
1m MXL belt (sold by meter)
hello, pls order 2pcs x sku 45-001-0168 via below link
https://www.geeetech.com/1m-2gt-belt-sold-by...
Date Added: 05/21/2022 by Geeetech Staff
1m MXL belt (sold by meter)
hello, pls order 2pcs x sku 45-001-0168 via below link
https://www.geeetech.com/1m-2gt-belt-sold-by...
Date Added: 05/21/2022 by Geeetech Staff
1m MXL belt (sold by meter)
Is this what I need to create spare belts on my A30T. ??
Date Added: 05/21/2022 by John kelly
1m MXL belt (sold by meter)
I want a spare belt for the hotbed on my A30T. Is this the correct item ? If it is not, can you indi...
Date Added: 05/21/2022 by John kelly
Assembled MK8 extruder
Hello, MK8 can support 3mm material:
Extrusion nozzle: 0.3mm,0.35mm,0.4mm,0.5mm (optional)
Materia...
Date Added: 05/19/2022 by Geeetech Staff
Assembled MK8 extruder
Will this come ready to print with 3mm material?
Date Added: 05/18/2022 by KYLE KLIEVER
Pneumatic Push Fitting PC4-M8*1.25, Used for A10M A20M A30M, A10T A20T A30T Mix Color 3D Printer, Compatible for Both Hotend and Extruder of These Mix Color Printers
hello , China post tracking number : RV599309451CN
it may still need some days to arrive, you can t...
Date Added: 05/18/2022 by Geeetech Staff
PLA Apple Green 3D Printer Filament 1.75mm 1kg/roll
Thanks for your support
Date Added: 05/18/2022 by Geeetech Staff
Pneumatic Push Fitting PC4-M8*1.25, Used for A10M A20M A30M, A10T A20T A30T Mix Color 3D Printer, Compatible for Both Hotend and Extruder of These Mix Color Printers
Where is my order ?
Date Added: 05/17/2022 by Brian Grossman
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
hello , you can generate another order , pay via paypal if it is ok for you
Date Added: 05/09/2022 by Geeetech Staff
5pcs* Nozzle for A10 Pro, A20, A30 Pro Single Extruder 3D Printers, 0.4mm Nozzle, Screw thread M6; Not for A10M/A20M/A30M/A10T/A20T/A30T !!
mijn bestelnr 202202072331105498:_br_Betaling wordt gewijgerd door VISA; te hoog risico!!
Date Added: 05/08/2022 by Hendrik Waarsing
A10/ A10 Pro/ A20/ A30 Pro 24V Printing Head, Single Extruder Hotend, 24V 40W, 85mm long heating rod, for V4.1B board version printer only
hello, it is intransit way , you can track it via below link , need about 20-60 days to arrive. some...
Date Added: 05/07/2022 by Geeetech Staff
5pcs * Nozzle for A10M A20M A30M, A10T A20T A30T Printer, 0.4mm nozzle,Screw thread M7
hello , from the tracking , it was delivered now, pls check your mail box etc . thanks
China post ...
Date Added: 05/07/2022 by Geeetech Staff
A10T A20T A30T 3 in 1 out hotend kit
hello, yes, this is for A10T A20T A30T
Date Added: 05/07/2022 by Geeetech Staff
A10T A20T A30T 12 Pin Connector hotend group assembly with pulley bracket for V4.0 board Version
hello, 16 pin A30T hotend group is sku : 800-001-0729
https://www.geeetech.com/a10t-a20t-a30t-16-pi...
Date Added: 05/07/2022 by Geeetech Staff
Grey Resin, Geeetech UV 405nm Rapid Resin, Water Washable, for LCD/DLP/SLA 3D Printers, 1KG
Glad to know that you like our resin, thanks for your support!
Date Added: 05/05/2022 by Geeetech Staff
PLA Apple Green 3D Printer Filament 1.75mm 1kg/roll
Glad to know that you like our filament, thanks for your support!
Date Added: 05/05/2022 by Geeetech Staff
PLA Luminous Blue 3D Printer Filament 1.75mm 1kg/roll
This filament is PLA filament, so brass nozzle is ok
Date Added: 05/05/2022 by Geeetech Staff
Grey Resin, Geeetech UV 405nm Rapid Resin, Water Washable, for LCD/DLP/SLA 3D Printers, 1KG
After some testing i found the perfect Settings for my Anycubic Photon Mono: 1,6seconds layer time a...
Date Added: 05/04/2022 by Timo Werner
5pcs * Nozzle for A10M A20M A30M, A10T A20T A30T Printer, 0.4mm nozzle,Screw thread M7
Hello, I don't receive my order ! Perhaps it's coming soon ?
Date Added: 05/04/2022 by Claude LACARRIERE
A10T A20T A30T 3 in 1 out hotend kit
Does this fit the A30T? is in the description but not the product info
Date Added: 05/03/2022 by Dennis Ball
A10T A20T A30T 12 Pin Connector hotend group assembly with pulley bracket for V4.0 board Version
What SKU number do I need to order a 16pin A30T hot end group assembly? I bought one previously on y...
Date Added: 05/03/2022 by Dennis Ball
PLA Apple Green 3D Printer Filament 1.75mm 1kg/roll
i really like this post, i think everyone should buy this
Date Added: 05/02/2022 by Puanani Uilani
PLA Luminous Blue 3D Printer Filament 1.75mm 1kg/roll
Does this require a hardened steel nozzle or is it safe for brass nozzles?
Date Added: 05/01/2022 by Etienne Gunnarsson
A10/ A10 Pro/ A20/ A30 Pro 24V Printing Head, Single Extruder Hotend, 24V 40W, 85mm long heating rod, for V4.1B board version printer only
good morning_br_I would like to know where my order is because I haven't heard from you for a while....
Date Added: 04/30/2022 by jean-françois barbey
Assembled MK8 extruder
Hello,this extruder is used for prusa i3 series
Date Added: 04/30/2022 by Geeetech Staff
Titan extruder kit for A10M A10T A20M A20T A30M A30T
hello, this can fit 3 in 1 out printers, 3 extruders means 3 in , filament go from 3 extruders into ...
Date Added: 04/30/2022 by Geeetech Staff
Assembled MK8 extruder
Hello - is this extruder compatible to the A20?_br_AND:_br_- how to install it, i can't see holes fo...
Date Added: 04/29/2022 by Maik Nendza
Titan extruder kit for A10M A10T A20M A20T A30M A30T
Does this have the 3 in capability?
Date Added: 04/29/2022 by Jason Van Ry
5 piece TMC2208 driver for 3d printer
If you assemble TMC 2208 drivers , do not need change firmware ,Â
but When install the driver , the...
Date Added: 04/28/2022 by Geeetech Staff
5 piece TMC2208 driver for 3d printer
Bonjour j ai acheté ces drivers pouvez-vous me dire qu elle tension régler pour le vref XYZ er extru...
Date Added: 04/27/2022 by Patrick saulou
PLA Black 3D Printer Filament 1.75mm 1kg/roll
Sorry Max, we don't have the prusa slicer(prusa mini), but you can purchase our pla filament to try,...
Date Added: 04/27/2022 by Geeetech Staff
New Upgrade Removable Spring Steel Magnetic Platform 310*310mm
A30 heatbed indeed is 320*320mm.
so this platform is a little smaller than A30 bed .
you can o...
Date Added: 04/27/2022 by Geeetech Staff
New Upgrade Removable Spring Steel Magnetic Platform 310*310mm
hello, why is written 310*310.. the bedplate of a30 isnt 320*320?
Date Added: 04/27/2022 by Mattia Bello
PLA Black 3D Printer Filament 1.75mm 1kg/roll
hello, did you have a configuration for the prusa slicer (prusa mini)?
Date Added: 04/26/2022 by max max
MK8 Dual Extruder
We are not sure if the cable can be matched or not
Date Added: 04/26/2022 by Geeetech Staff
A20/M/T LCD Screen 12864 for V4.1B Version board, with 12 Pin LCD Cable Connector at Backside of the Screen
You are welcome, thanks for your support
Date Added: 04/26/2022 by Geeetech Staff
A20/M/T LCD Screen 12864 for V4.1B Version board, with 12 Pin LCD Cable Connector at Backside of the Screen
Thank you
Date Added: 04/25/2022 by Stuart Weldrick-eames
MK8 Dual Extruder
Hello, _br_Does this work with an alfawise U20+ (aka longer lk1)_br_Regards
Date Added: 04/25/2022 by Arnaud Marechal
MK8 Dual Extruder
It may be not applicable, it is best to use the same extruder as the original printer
Date Added: 04/25/2022 by Geeetech Staff
A20/M/T LCD Screen 12864 for V4.1B Version board, with 12 Pin LCD Cable Connector at Backside of the Screen
yes , will change order for you . send you screen for V4.0 board A20M
Date Added: 04/25/2022 by Geeetech Staff
A10Pro//A10M/A10T hotend to GT2560 V4.1B Control board link cable
You are welcome, thanks for your support
Date Added: 04/25/2022 by Geeetech Staff
2pcs* 4020/DC 24V Cooling Fan for Extruder Hotend/ Control Board 40x40x20mm
You are welcome, thanks for your support
Date Added: 04/25/2022 by Geeetech Staff
2pcs* 4020/DC 24V Cooling Fan for Extruder Hotend/ Control Board 40x40x20mm
I received all orders yesterday, I have installed them and all work fine! Thank you!!
Date Added: 04/25/2022 by Richard Mascarenas
A10Pro//A10M/A10T hotend to GT2560 V4.1B Control board link cable
Comme toujours, j ais bien recu le cable dans les temps, tres bon service et remerciement a Judy pou...
Date Added: 04/24/2022 by odette clemente
A20/M/T LCD Screen 12864 for V4.1B Version board, with 12 Pin LCD Cable Connector at Backside of the Screen
Can you send me the screen for the v 4.0 board? I ordered the wrong one
Date Added: 04/24/2022 by Stuart Weldrick-eames
MK8 Dual Extruder
bonjour peut on les installer sur une a10m v4.0 merci
Date Added: 04/23/2022 by LAURENT magard
A20 GT2560 V4.0 Control Board, before order pls check which board does your printer has
hello
1. pls check which control board does your printer has , it will be written on the board it...
Date Added: 04/23/2022 by Geeetech Staff
Heatbed Aluminum Plate for A10/A10M/A10T ,Without welded line
hello, this link plate is for V4.1B board version . if you need it for V4.0 board version , you can ...
Date Added: 04/23/2022 by Geeetech Staff
Heatbed Aluminum Plate for A10/A10M/A10T ,Without welded line
Esta placa de aluminio servirÃa para una A10 con una GT2560 V4?
Date Added: 04/22/2022 by Juan Joly Palomino
A20 GT2560 V4.0 Control Board, before order pls check which board does your printer has
Hi Geeetech, I have a few Geeetech Printers, my 1st ever printer was the awesome wee but powerful Ge...
Date Added: 04/22/2022 by James Wilton
PLA Black 3D Printer Filament 1.75mm 1kg/roll
Of course, what products will you print?
Date Added: 04/22/2022 by Geeetech Staff
PLA Black 3D Printer Filament 1.75mm 1kg/roll
too many colors, can you help me?
Date Added: 04/21/2022 by eileen floyd
5pcs * Nozzle for A10M A20M A30M, A10T A20T A30T Printer, 0.4mm nozzle,Screw thread M7
hello, we only have 0.4mm nozzle available , if you need other size nozzle for A20M , you can try to...
Date Added: 04/21/2022 by Geeetech Staff
5pcs * Nozzle for A10M A20M A30M, A10T A20T A30T Printer, 0.4mm nozzle,Screw thread M7
Mi potete aiutare vorrei trovare uggeli per A20M da 0.6 o piu
Date Added: 04/21/2022 by Michael Suarez
A10M GT2560 V4.0 Control Board, before order pls check which board does your printer has
sorry , we do not have stock for V3.1 board anymore . other boards can not replace it .
Date Added: 04/20/2022 by Geeetech Staff
A10M GT2560 V4.0 Control Board, before order pls check which board does your printer has
Hello, i need a v3.1 board for an A10M, how can I buy it?
Date Added: 04/19/2022 by Luca Simioni
A20M GT2560 V4.1B Control Board, before order pls check which board does your printer has
hello ,
A20M V4.1B board uses below firmware, same firware as that originally come with the printe...
Date Added: 04/18/2022 by Geeetech Staff
A20M GT2560 V4.1B Control Board, before order pls check which board does your printer has
where can i get an updated version of marlin for this board (the one with the 2208 drivers)?_br_
Date Added: 04/15/2022 by Yves Paulin
A10M GT2560 V4.1B Control Board, before order pls check which board does your printer has
hello, you can order this board , but write a comment for your order , need A10M V4.1B board soldere...
Date Added: 04/13/2022 by Geeetech Staff
A10M GT2560 V4.1B Control Board, before order pls check which board does your printer has
hello ,I need to change my A 10M Motherboard to be silent stepper drivers _br_the old one is Baud:25...
Date Added: 04/13/2022 by Milad Youssef
PLA Matte Brown 3D Printer Filament 1.75mm 1kg/roll
hello, this product link only have US warehouse and China warehouse option .
because US warehouse ...
Date Added: 04/12/2022 by Geeetech Staff
A10Pro//A10M/A10T hotend to GT2560 V4.1B Control board link cable
hello， yes, you can order this A10T cable , but write a comment for your order , need A20T hotend ca...
Date Added: 04/12/2022 by Geeetech Staff
A30T Control Panel LCD Touch Screen Display
hello, this screen can not used on A20T printer.
A20T printer need use same screen as it originall...
Date Added: 04/12/2022 by Geeetech Staff
PLA Matte Skin 3D Printer Filament 1.75mm 1kg/roll
yes, It is
Date Added: 04/11/2022 by Geeetech Staff
Displaying 2001 to 2100 (of 3673 reviews)
TOP