Reviews
Displaying 1501 to 1600 (of 2216 reviews)
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Si può montare sulla a20? bisogna fare modifiche sul firmware?
Date Added: 11/03/2019 by Aldo Mantua
1 Meter 2GT Belt (sold by meter)
yes, it can used on a30
Date Added: 10/10/2019 by Jocelin Jia
1 Meter 2GT Belt (sold by meter)
Hello, this belt is good for A30? Thank you
Date Added: 10/03/2019 by Pietro Casciano
1 Meter 2GT Belt (sold by meter)
heool, yes, this can fit with A10, Pitch: 2mm , Width: 6mm
Date Added: 09/17/2019 by Jocelin Jia
1 Meter 2GT Belt (sold by meter)
Does this fit the A10? Does the A10 has the same specifications? Pitch and width?
Date Added: 09/16/2019 by Cosmin Rotaru
3D Printer Brass M6 nozzle for MK8 extruder/0.3mm
hello, this is not for A20M; pls search SKU: 45-001-0448, this is for A20M
Date Added: 09/02/2019 by Jocelin Jia
3D Printer Brass M6 nozzle for MK8 extruder/0.3mm
Hi, Is it possible use the Brass M6 nozzles for my Printer A20M ? Thank you.
Date Added: 09/01/2019 by Stéphane Couvet
Pro B and Pro W Printer MK8 Extruder Holder
Where can i find the MK8 Mount plate. The Aluminium plate between the MK8 Extruder and the Extruder ...
Date Added: 03/13/2019 by Michael Woletz
Geeetech 3D Touch V3.2 Auto Leveling Sensor
please send mails to victory.lei@geeetech.cn, thanks
Date Added: 03/11/2019 by Jocelin Jia
Acrylic Prusa I3 PRO B 3D Printer DIY kit
now available
Date Added: 03/11/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Good job, thanks your supporting for geeetech~
Date Added: 03/11/2019 by Jocelin Jia
24V 15A DC power supply for A10 A10M A10T A20 A20M A20T
sorry for misunderstanding, i will upgrade the new picture. This psu do can use on a20m but the pict...
Date Added: 03/11/2019 by Jocelin Jia
24V 15A DC power supply for A10 A10M A10T A20 A20M A20T
Does this power supply work on the A20M? It seems quite different from the one that comes originally...
Date Added: 03/08/2019 by Andres Del Rio Benito
Geeetech 3D Touch V3.2 Auto Leveling Sensor
For the owners of the Geeetech A10 I have created a printable mounting for the 3DTouch:
https://www...
Date Added: 03/04/2019 by Ralf Miunske
ABS+ White 3D Printer Filament 1.75mm 1kg/roll
great
Date Added: 03/04/2019 by sergio madrid
Geeetech 3D Touch V3.2 Auto Leveling Sensor
I have been looking on your site for the fuse for a A20M there are 2 of the I would like to purchase...
Date Added: 03/03/2019 by Charles Signore
Acrylic Prusa I3 PRO B 3D Printer DIY kit
When will there be stock in De of the prusa i3 pro B
Date Added: 03/02/2019 by Koos van de Graaf
Geeetech 3D Touch V3.2 Auto Leveling Sensor
I've set up the BLTouch on my Ender 3 with Marlin 1.1.9. Repeatability test M48 shows me a precision...
Date Added: 02/27/2019 by Szabolcs Tóth
Acrylic Prusa I3 PRO B 3D Printer DIY kit
currently, not available, thanks
Date Added: 02/14/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
yes
Date Added: 02/14/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
which printer you use?
Date Added: 02/14/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
no need
Date Added: 02/14/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
If I order this, is there anything else I need to order at the same time, screws bolts or extension ...
Date Added: 02/11/2019 by Paul foster
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi. Is it full compatible with Megatronics V2 and Repetier.
Date Added: 02/08/2019 by Peter Meyer
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hello
do you have the user manual in French and the software to run my 3D printer geeetech I3 Pro B...
Date Added: 02/03/2019 by tocupe pas
Acrylic Prusa I3 PRO B 3D Printer DIY kit
please send order number and part number to jocelin.jia@geeetech.cn, thanks
Date Added: 01/23/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello, you need upgrade to the latest firmware and set the configuration for the 3d touch in the fir...
Date Added: 01/23/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
I purchased a 3D Touch from you, I have wired and installed the product. It has caused my printer to...
Date Added: 01/22/2019 by Aaron Dent
Acrylic Prusa I3 PRO B 3D Printer DIY kit
I just bought a used I3-Pro-B. it needs some parts that you don't have listed. I need the Aluminum p...
Date Added: 01/22/2019 by Joseph Bina
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
can you please send mails to jocelin.jia@geeetech.cn, thanks
Date Added: 01/16/2019 by Jocelin Jia
Acrylic Prusa I3 PRO B 3D Printer DIY kit
it connect on extension wires, thanks
Date Added: 01/16/2019 by Jocelin Jia
Acrylic Prusa I3 PRO B 3D Printer DIY kit
it connect on extension wires, thanks
Date Added: 01/16/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
please use the latest version, thanks
Date Added: 01/16/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
I ordered one of these from you, I am still waiting to receive it, when it comes in wich firmware do...
Date Added: 01/16/2019 by Rick Ferrell
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hi, I bought an Acrylic_I3_pro B and mounted it. But, at the end, when connecting cables I realized ...
Date Added: 01/14/2019 by Roque Alonso
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
In an earlier post I was asking to purchase a fan unfortunately I put the main board wrong my printe...
Date Added: 01/12/2019 by Mark Hextall
Acrylic Prusa I3 PRO B 3D Printer DIY kit
please check if you connect the wire right, by the way, send me order number, thanks
Date Added: 01/09/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Sorry, just promote this product this this week, it will recover the price as the same buy together ...
Date Added: 01/09/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Why is this $10 more when you add it to a printer package vs buying it separately?
Date Added: 01/09/2019 by Tony Paddock
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Para que sirve la resistencia de 10k que viene en paquete junto al 3dtouch, no entiendo como no expl...
Date Added: 01/07/2019 by Alejandro Ariño
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
Will the 0.17 amp fan work with 0.9 amps?
Date Added: 01/06/2019 by Nicholas budo
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Ok ..e buna azi fac prima piesa cu P13 Pro W....START
Date Added: 01/05/2019 by Lucian Spoiala
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hi!when I turned on my 3D printer the power supply broke out. What should I do?
Date Added: 01/04/2019 by Rosario Iurato
I3 PRO C Printer S-250-12 12V 20A DC power supply
can you please send me order number?
Date Added: 01/02/2019 by Jocelin Jia
Acrylic Prusa I3 PRO B 3D Printer DIY kit
may i know the settings of the rods?
Date Added: 01/02/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
yes
Date Added: 01/02/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
http://www.geeetech.com/forum/viewtopic.php?f=20&t=60826
Date Added: 01/02/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
http://www.geeetech.com/forum/viewtopic.php?f=20&t=60826
Date Added: 01/02/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Yes, it can use on prow but you need upgrade the firmware and set it in the firmware
Date Added: 01/02/2019 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Si può montare su una prusa i3 pro w? Se si bisogna effettuare modifiche a livello di firmware?
Graz...
Date Added: 01/01/2019 by Francesco Leone
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi, my printer board is GT2560+4 A4988- is it fully compatible whith this board? Thanks
Date Added: 12/31/2018 by Fernando García
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hi! i received this printer for christmas and the left z-axis motor doesn't seem to work properly.wh...
Date Added: 12/31/2018 by Asia Covolan
Geeetech 3D Touch V3.2 Auto Leveling Sensor
I would like to buy one of this sensors for my Acrylic Geeetech Prusa I3 pro B 3D Printer with the G...
Date Added: 12/30/2018 by Maciej Mucha
I3 PRO C Printer S-250-12 12V 20A DC power supply
HI dear support, My item was sent back by Portugal Customs. I think it's in Germany DHL. What can I ...
Date Added: 12/27/2018 by Rui Rodrigues
Geeetech 3D Touch V3.2 Auto Leveling Sensor
http://www.geeetech.com/forum/viewtopic.php?f=20&t=17046-
, please visit here, thanks
Date Added: 12/24/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
I just bought the 3d Touch for an A10. My firmware is Marlin 1.1.8, is it ok or do i need to do some...
Date Added: 12/24/2018 by Nicola TAU
10pcs 100Kohm NTC Thermistors for heated bed
yes
Date Added: 12/20/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
this can use on those printer but needb you to reinstall the firmware and setting, thanks
Date Added: 12/20/2018 by Jocelin Jia
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
use on extruder, right? now the fans we use is this kind of fan
Date Added: 12/20/2018 by Jocelin Jia
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
I sent you a reply 3 or 4 days ago with reference to the fan pictured. I know I can use the fan but ...
Date Added: 12/20/2018 by Mark Hextall
Geeetech 3D Touch V3.2 Auto Leveling Sensor
is fully compatible whit cr-10s and anet a8? the lenght of wire is ok? or i need a modify, where i b...
Date Added: 12/19/2018 by Flavio Santini
10pcs 100Kohm NTC Thermistors for heated bed
Can i use these on the A20M
Date Added: 12/19/2018 by irene wolters
PLA Grey 3D Printer Filament 1.75mm 1kg/roll
This is righ. The white you placed together with printer, the gray and some components still process...
Date Added: 12/18/2018 by Jocelin Jia
PLA Grey 3D Printer Filament 1.75mm 1kg/roll
?? According to my order accnt. I was suppose to get a 1 K spool of GRAY PLA.. what arrived was WHIT...
Date Added: 12/17/2018 by Joseph Bina
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
This fan can use on PROB, thanks
Date Added: 12/14/2018 by Jocelin Jia
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
I have a Geeetech i3 Pro B Printer fitted with a GT2580 main board with two 40x40x10 fans labelled G...
Date Added: 12/13/2018 by Mark Hextall
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
Hello Mark,
can u tell me which modles you use?
Date Added: 12/13/2018 by Jocelin Jia
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
I am after two 40x40x10 12v fan which I believe is 2 wire 3 pin with a white male plug which I think...
Date Added: 12/12/2018 by Mark Hextall
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Firstly,please join Geeetech facebook user group,secondly,visit links:https://lookaside.fbsbx.com/fi...
Date Added: 12/10/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
A10 first version (gt2560 rev B) work on it? Where i can find where to pin?
Date Added: 12/08/2018 by Daniel Bax
Geeetech 3D Touch V3.2 Auto Leveling Sensor
yes
Date Added: 12/06/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
can i use it with a GT2560 V3.0 Control Board (A10)??
Date Added: 12/05/2018 by Chris M.
Geeetech 3D Touch V3.2 Auto Leveling Sensor
please leave your mails address here, will send you by mails,thanks
Date Added: 12/03/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
which modles you use? have you set the configuration in the firmware?
Date Added: 12/03/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
it need upgrade,otherwise, it can not use it
Date Added: 12/03/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Will it work on my Duplicator 5?
Date Added: 12/02/2018 by Maximilian Schwab
Geeetech 3D Touch V3.2 Auto Leveling Sensor
jsut finished installing a 3d touch auto bed leveling. scrolling through my LCD screen. i do not hav...
Date Added: 12/02/2018 by Walter Rubio
Geeetech 3D Touch V3.2 Auto Leveling Sensor
unable to download manual
Date Added: 11/30/2018 by Walter Rubio
Geeetech 3D Touch V3.2 Auto Leveling Sensor
The red light on? have you set configuration in the firmware of the 3 d touch?
Date Added: 11/30/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
When printing 3dtouch does not pick up the stem. Marlin 1.1.9
Date Added: 11/30/2018 by Jose Miguel
Geeetech 3D Touch V3.2 Auto Leveling Sensor
it can use on A20M , thanks
Date Added: 11/20/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
what mother boards will it work with
Date Added: 11/19/2018 by paul austin
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
I really hope this is the 40mm fan. The image says 30mm which does NOT inspire confidence...
We sh...
Date Added: 11/16/2018 by Ray Skye
Geeetech 3D Touch V3.2 Auto Leveling Sensor
a20m
Date Added: 11/15/2018 by Giuseppe Romano
10pcs 100Kohm NTC Thermistors for heated bed
please use the heat retardant taps, thanks
Date Added: 11/07/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
it not support it, thanks
Date Added: 11/07/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
will this work on a Geeeteck aliminium
Date Added: 11/07/2018 by paul austin
10pcs 100Kohm NTC Thermistors for heated bed
how to fix or glue it to the hotbed?
Date Added: 11/07/2018 by Luca Colombo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
E180 can not support auto leveling
Date Added: 11/02/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Does the Geeetech 3DTouch auto bed leveling sensor for 3D printer works with E180?
And how to at it ...
Date Added: 10/31/2018 by HHT Richelle
Acrylic Prusa I3 PRO B 3D Printer DIY kit
order number, please! if you broken it by yourself,will not offer free replacement,thanks
Date Added: 10/22/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
use the latest firmware, please
Date Added: 10/22/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Salve per collegarlo ad una stampante a10 serve fare unaggiornamento al sistema?
Date Added: 10/21/2018 by Paolo Fasano
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Buenos días
Compré una impresora 3D y se rompió el cable que conecta el motor del extrusor querría ...
Date Added: 10/21/2018 by Luis Alonso
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Thank you for the quick reply, now I can install!
Date Added: 10/20/2018 by Nathan Collom
Geeetech 3D Touch V3.2 Auto Leveling Sensor
it need you power it then works , otherwise, it like that
Date Added: 10/20/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Should the aluminum"pin" move when I shake the unit lightly? I just opened the package and noticed i...
Date Added: 10/20/2018 by Nathan Collom
Geeetech 3D Touch V3.2 Auto Leveling Sensor
it should works
Date Added: 10/17/2018 by Jocelin Jia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Does the Geeetech 3DTouch auto bed leveling sensor for 3D printer works with Anet A6?
Date Added: 10/17/2018 by Luis Betancur
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi David,
you can send mails to victory.lei@geeetech.cn, thanks
Date Added: 10/12/2018 by Jocelin Jia
Displaying 1501 to 1600 (of 2216 reviews)
TOP