X
.jpg)
The NTC Thermistor is widely used to protect the electronic equipment from high purity and uniform materials to achieve a construction of near-perfect theoretical density. This ensures small size, tight resistance and B value torelance, and fast response against temperature variation, making a highly sensitive and precision component. NTC Thermistor is available in wide range to meet your demands for small size and high reliability.
Resistance value | R（25°C）=100K±1% |
B Value: | B=3950±1% |
Insulation resistance | 50MΩ or over by DC500V megger (between glass and lead wire) |
Thermal time constant (τ) | τ≤10～17s (in still air) |
Thermal dissipation constant (δ) | δ=1.1～1.6mW/°C (in still air) |
Operating temperature range | -50～+260°C |
Packing list:
10 x 100K ohm NTC Thermistors for heated bed
TOP
I'd like a thermistor for the geeetech a10m hotend? Is it possible to get one from here?
Hi Lorna, You can purchase the thermistor for your A10M printer, this is the product link: https://www.geeetech.com/100kohm-ntc-thermistors-for-jietai-hotend-p-836.html,and the sku is 25-010-0016. if you need it for specific model printer , pls write a comment for your order , have a nice day.
Hi,_br_I'm looking for thermistor for hotend, printing machine Mizar S._br_Where can i find that?_br_Thanks_br_Mauro
Dear customer, This is product link:https://www.geeetech.com/10pcs-100kohm-ntc-thermistors-for-heated-bed-p-632.html,thanks for your support, have a nice day.
I need replacement for my mizar S, these do NOT work.. they do not come with the black and red wires with small plastic plug on the end to be able to hook it up? where do i go from here.. i need the full unit, not a piece of it/
Dear customer, You can choose amozon ,aliexpress or ebay platform to purchase it , thanks a lot, hope you have a good day .
Which is the correct SKU to be used for Mizar S?
Dear customer, It is suitable for Mizar s , the sku is 25-001-0014,thanks for your consult , hope you have a good day .
Can this be used for mizar s?
Dear customer , it is not used for mizar s , thanks for your support , hope you have a good day .
Which SKU can be used for Mizar S? I need to replace it, but I cannot find the proper one
Dear customer , This is product link : https://www.geeetech.com/10pcs-100kohm-ntc-thermistors-for-heated-bed-p-632.html ,welcome order it any time ,thanks a lot .
Can I use this for Geeetech A10 hotend ?. Is it matching?
yes，it is matching.
Please replace with the Thermistors for the hotend_br_
Ok, it has been recorded for you. Thank you for your support to Geeetech.
Hello, can I use it on my Prusa I3 Pro W?
Yes,sure.
Hello, can I use it on my A10M hotbed (GT2560 - V 3.0)?
Yes, Joao, it can be used fro A10M hotbed
Hello, can I use this thermistor for Geeetech A10 ? Is there anything else to do appart from wiring it and fixing it to the nozzle ?
hello, it is for heatbed, not for hotend. if you need for A10 hotend, pls send email to sales@geeetech.com
Is this Thermistor the Same as the hotend thermistor for Geeetech A30?
hello, it is not the same, but can use it
Can i use these on the A20M
yes
please use the heat retardant taps, thanks
how to fix or glue it to the hotbed?
Are these OK to use on a GEEETech A30 as a temperature sensor, fixed to the side of a heater block?
yes, it can use