Reviews
Displaying 3201 to 3300 (of 3673 reviews)
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hello Gustavo, Short distance extruder for 1.75mm (left hand) is compatible.
Date Added: 01/16/2017 by rita xiang
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hi, I want to change the plastic feeder of my "Geeetech Acrylique Reprap Prusa I3 Pro B" single extr...
Date Added: 01/16/2017 by Gustavo Riveras
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hello Calvez,can you please tell me on which printer you need to use this? I will see if the left ha...
Date Added: 01/16/2017 by rita xiang
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hello Mohammad,can you please tell me on which printer you need to use this? I will see if the left ...
Date Added: 01/16/2017 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
sorry, this email is not for aftersales service, please contact myorder@geeetech.com or sales@geeete...
Date Added: 01/16/2017 by rita xiang
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Short distance right hand is out of stock, but for your printer, Short distance left hand is also ok...
Date Added: 01/16/2017 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
yes, we send the invoice along with the printer, if you need a copy, please contact our sales.
Date Added: 01/16/2017 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
10 hours to loading the driver? The USB driver will be automatically installed, if not, please downl...
Date Added: 01/16/2017 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Is there a human on the planet that can start this device. I have spent 10 hours just trying to load...
Date Added: 01/13/2017 by Lou Dehner
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello David, Yes, this can be used on pro X, Please watch the video here https://www.youtube.com/wat...
Date Added: 01/12/2017 by rita xiang
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hello, I need the feeder kit (both 1.75 mm and 3 mm) right hand-hand. But I see they are currently u...
Date Added: 01/12/2017 by Mohammad Abu Hasan Khondoker
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Will this work on your Geeetech Prusa I3 X? Thanks in advance.
Date Added: 01/12/2017 by David Ainlay
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Do you emit invoice? Thanks
Date Added: 01/11/2017 by Puria Nafisi
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hi, i have your famous I3A Pro Alu with one extruder, what is the good option for this feeder ?
Is ...
Date Added: 01/04/2017 by Richard ROUSSINET
Acrylic Prusa I3 PRO B 3D Printer DIY kit
test...
Date Added: 01/04/2017 by Arnold Szarka
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hi, I received bent rods... sent a mail with pictures and more details to the getech01@163.com Is th...
Date Added: 01/04/2017 by Arnold Szarka
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hi, I want to bought it with option Short distance extruder for 1.75mm right hand but I can only cho...
Date Added: 01/04/2017 by Calvez Fabien
Assembled MK8 extruder
I was thinking of changing the extruder with mixer, which gives jamming problems, for this is simple...
Date Added: 01/04/2017 by Daniel Leiva gallardo
I3 PRO C Printer S-250-12 12V 20A DC power supply
Thank you so much for the delivery and fair costs.
Date Added: 01/04/2017 by Jochen Kainer
100Kohm NTC Thermistors for JIETAI hotend
Hello Lawrence, Yes,it is the thermistor for the M201 Printer.
Date Added: 01/04/2017 by rita xiang
Assembled MK8 extruder
it is not comatible with M201, can you tell me what kind of modification do you want to do with your...
Date Added: 01/04/2017 by rita xiang
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello Roger , you can print this one http://www.thingiverse.com/thing:1769822
Date Added: 01/04/2017 by rita xiang
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Yes, you can mount it against the fan!
Date Added: 01/04/2017 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hello Cesare, the leveling sensor will be shipped from China. You need to modify the firmware by you...
Date Added: 01/04/2017 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
I am in Italy and planning to buy also the leveling sensor. Do I get both items shipped from Europen...
Date Added: 01/03/2017 by Cesare Giammiro
Geeetech 3D Touch V3.2 Auto Leveling Sensor
I have the Pro C dual extruder, if the same mount is the same as the pro B, how do I attach it when ...
Date Added: 01/02/2017 by Roger Jenkins
Geeetech 3D Touch V3.2 Auto Leveling Sensor
After printing a mount for the sensor (for the pro C), it seems that this is not the same as for the...
Date Added: 12/31/2016 by Laurent Vinel
Assembled MK8 extruder
Hello, Is this extruder compatible with the geeetech m201?
Date Added: 12/31/2016 by Daniel Leiva
100Kohm NTC Thermistors for JIETAI hotend
Is this thermistor for the M201 Printer ?
Date Added: 12/28/2016 by Lawrence Johnson
Acrylic Prusa I3 PRO B 3D Printer DIY kit
yes, you can, but the aluminium frame do not include the side panel which means there is no place to...
Date Added: 12/27/2016 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Did you choose the board type? please refer to this instruction: http://www.geeetech.com/forum/viewt...
Date Added: 12/27/2016 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
so trying to load the firmware but keep getting an error. "using typedef-name 'fpos_t'after 'struct'...
Date Added: 12/27/2016 by mark Geraghty
Acrylic Prusa I3 PRO B 3D Printer DIY kit
I have this printer andiI would like to upgrade it to the aluminium frame can you purchase the frame...
Date Added: 12/27/2016 by George Youssef
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Yes the GT2560 board
Date Added: 12/27/2016 by George Youssef
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
i am sorry to hear that, pease contact our sales for replacement. sales@geeetech.com
Date Added: 12/19/2016 by rita xiang
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
i am sorry to hear that, pease contact our sales for replacement. sales@geeetech.com
Date Added: 12/19/2016 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
scroll up, you can see the building instruction. Please refer to the building manual.
Date Added: 12/19/2016 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
I have build this printer, but need the info for connecting all the electronic complainants correctl...
Date Added: 12/19/2016 by mark Geraghty
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
1 x 693zz bearing que j’ai reçu au-lieu de 1 x 694zz bearing
Date Added: 12/17/2016 by deveau pierre-luc
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hi, you have sent me wrong baring dimension. also screw does not fit. please help
Date Added: 12/17/2016 by Joze Verbic
Acrylic Prusa I3 PRO B 3D Printer DIY kit
the wires for GT2560 3D printer control board?
Date Added: 12/14/2016 by rita xiang
MK8 Dual Extruder
sorry, no 24V, but if you need, we can custimize for you. Please contact our sales at sales@geeetech...
Date Added: 12/14/2016 by rita xiang
MK8 Dual Extruder
hi do you do this with 24v heating rods
Date Added: 12/14/2016 by alan shore
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hi, is this feeder compatible with a MeCreator 2 printer?
Date Added: 12/14/2016 by Frédéric SCHROBILTGEN
Acrylic Prusa I3 PRO B 3D Printer DIY kit
I would like to purchase the entire electrical wiring for this printer how caniI do that?
Date Added: 12/13/2016 by George Youssef
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello George, thanks for contacting us, please send your enquiry to sales@geeetech.com, our sales wi...
Date Added: 12/13/2016 by rita xiang
MK8 Dual Extruder
Hi Daniel .. could you maybe tell me which extruder plate you bought for your I3 Hephestos ? Thank y...
Date Added: 12/12/2016 by Sabrina Willert
Geeetech 3D Touch V3.2 Auto Leveling Sensor
I bought this package and it doesn't come with the extension wires to reach theboard . It's not much...
Date Added: 12/09/2016 by George Youssef
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
could you please show me how this goes together? The bearing is too small the way i see it?
Date Added: 12/07/2016 by Richard Neal
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
what size of the ball bearing do you receive please?
Date Added: 12/07/2016 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
hello Stephen, the starter filament is PLA.
Date Added: 12/07/2016 by rita xiang
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
pour le moment les pièces semble être de bonne qualités, mais petit problème avec le roulement a bil...
Date Added: 12/07/2016 by deveau pierre-luc
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Is the filament that comes with the kit abs or plastic? I'm ready to test my printer and need to kno...
Date Added: 12/07/2016 by Stephen Oates
Geeetech 3D Touch V3.2 Auto Leveling Sensor
yes, this works perfectly on the pro B
Date Added: 12/04/2016 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hello ,
you need to change the motor direction of the X axis. please refer to these.
1. download th...
Date Added: 12/04/2016 by rita xiang
3D Printer Brass M6 nozzle for MK8 extruder/0.3mm
Yes, this is the nozzle used on the hotend for G2s pro.
Date Added: 12/04/2016 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hello Pietro, the current of the motor is 1.5A.
Date Added: 12/04/2016 by rita xiang
Geeetech 3D Touch V3.2 Auto Leveling Sensor
I have a Geeetech i3 pro x, will this fit my machine. My machine works like the previous machine.
Date Added: 12/04/2016 by Charlie Spann
Acrylic Prusa I3 PRO B 3D Printer DIY kit
I have build this printer and have two issues:
-The x-axiz motor works reveresed. When homing it tr...
Date Added: 12/03/2016 by Mats Larsson
3D Printer Brass M6 nozzle for MK8 extruder/0.3mm
Will this work on g2s pro?
Date Added: 12/02/2016 by Alee B
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hi, the last year I bought this excellent printer, from few days I have a problem with the driver st...
Date Added: 12/02/2016 by Pietro Gramma
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hello George, here is the stepper motor you need https://www.geeetech.com/hybrid%C3%82%C2%A0stepper%...
Date Added: 11/30/2016 by rita xiang
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello, I am sorry to tell you this item is not compatible with M201 now
Date Added: 11/30/2016 by rita xiang
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi, is the M201 printer compatible with this device?
Date Added: 11/30/2016 by I D
Acrylic Prusa I3 PRO B 3D Printer DIY kit
I have this printer and I need to replace the stepper motors. What model number are they?
Date Added: 11/29/2016 by George Youssef
Acrylic Prusa I3 PRO B 3D Printer DIY kit
because I'm having problems with this printer and I bought a GTM32 board by mistake. I have installe...
Date Added: 11/27/2016 by George Youssef
Acrylic Prusa I3 PRO B 3D Printer DIY kit
I have this printer and it was working well. now the x and y motors are making a grinding noise and ...
Date Added: 11/27/2016 by George Youssef
MK8 Dual Extruder
hello Steven, thanks for contacting us, if you need any replacement, please contact the ebay seller,...
Date Added: 11/27/2016 by rita xiang
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
the yellow wire is for s pin, if you have only two pin connector, you can use the blk and red wire
Date Added: 11/27/2016 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
hello Camille, i am sorry to tell you that ethernet connection is not available on this printer.
Date Added: 11/27/2016 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
why do you want to use the GTM32 board with this printer ? it is not open source
Date Added: 11/27/2016 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Can you use the GTM32 board with this printer if yes what order do you plug the stepper drivers in?
Date Added: 11/27/2016 by George Youssef
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi I'm having a little trouble with the 3D Touch. Please see here http://www.geeetech.com/forum/view...
Date Added: 11/27/2016 by Ian Sugden
Acrylic Prusa I3 PRO B 3D Printer DIY kit
200x200x180
Date Added: 11/26/2016 by George Youssef
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Is there a possibility to use the prusa i3 b with a ethernet connection? Thanks in advance
Date Added: 11/26/2016 by Camille Pinto
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
what is the yellow wire for and could I use a fan with only two wires blk and red.?
Date Added: 11/23/2016 by Judd Whiting
MK8 Dual Extruder
we have bought 2 printers from your German distributor Squaremart on Ebay. They arrived with the wro...
Date Added: 11/23/2016 by Steven Morris
Pro B and Pro W Printer MK8 Extruder Holder
Hello Carlos, this holder doesn't include the assemble board.
Date Added: 11/21/2016 by rita xiang
Fan extention wire M/M 1200mm
Hello Richard, please provide me your order number.
Date Added: 11/21/2016 by rita xiang
Fan extention wire M/M 1200mm
Can't find the Hex nut M3. I was shorted in the kit several. Please Send them
Rick
Date Added: 11/21/2016 by Richard Neal
6PCS Mechanical End Stop Switch Module V1.2
How can you install these on you 8mm Acrylic frame with metal parts? I recently replaced the GT boar...
Date Added: 11/20/2016 by Richard Payne
Pro B and Pro W Printer MK8 Extruder Holder
Hi. This holder includes the MK8 assemble board shown in this picture (http://www.geeetech.com/wiki/...
Date Added: 11/19/2016 by Carlos Stein
MK8 Dual Extruder
if you want to upgrade your pro x into a dual extruder one, please refer contact our sales for the k...
Date Added: 11/18/2016 by rita xiang
MK8 Dual Extruder
Hi, i buyed this extruder to my i3x printer. What else i need to get this working? I also buyed one ...
Date Added: 11/17/2016 by Mikko Tuominen
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Yes it looks like I can, attach it to the board. next question is about the programing, I have not s...
Date Added: 11/16/2016 by Levi Gaskin
Geeetech 3D Touch V3.2 Auto Leveling Sensor
3-pin: Brown (-, GND) Red (+5V) Orange (control signal)
2-pin: Black (-, GND) White (Z min)
can you ...
Date Added: 11/15/2016 by rita xiang
MK8 Dual Extruder
sorry, it cannot be used on Me creator 2
Date Added: 11/15/2016 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
what is the volume you set in printer setting on the software please?
Date Added: 11/15/2016 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hi I have this printer and when I try and print objects that are about 180 x 180 it prints of the bo...
Date Added: 11/13/2016 by George Youssef
MK8 Dual Extruder
Can I use with 3d printer Me creator 2?
Date Added: 11/10/2016 by jose pires
Geeetech 3D Touch V3.2 Auto Leveling Sensor
I have a hictop diy reprap prusa i3 with the Mks Base V1.3 Reprap Arduino board can I use this on my...
Date Added: 11/09/2016 by Levi Gaskin
MK8 Dual extruder holder
please contact sales@geeetech.com for the metal block
Date Added: 11/08/2016 by rita xiang
MK8 Dual extruder holder
yes, of cause you can.
Date Added: 11/08/2016 by rita xiang
MK8 Dual extruder holder
Hi, where can i buy the metal block to connect the two extruders ?
Thanks
Date Added: 11/08/2016 by Bottausci Mathieu
Geeetech 3D Touch V3.2 Auto Leveling Sensor
yes,,GT2560 support 3DTouch auto leveling sensor. You do need to add aluminum plate, glass also work...
Date Added: 11/07/2016 by rita xiang
Geeetech 3D Touch V3.2 Auto Leveling Sensor
yes, there is only 2 pin on the board. but you can find the 3-pin in the package of the sensor. plea...
Date Added: 11/07/2016 by rita xiang
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi There, is the Geeetech prusa I3 A Pro supported and how to wire the sensor. I have purchase the s...
Date Added: 11/04/2016 by Daniel Rapaic
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi,I bought I3 pro C in July2015.Board is GT2560.Is this board support 3DTouch auto leveling sensor?...
Date Added: 11/03/2016 by Shiva H
Acrylic Prusa I3 PRO B 3D Printer DIY kit
what screw do you mean exactly please? do you want to buy the control board or the screw? Please sen...
Date Added: 11/03/2016 by rita xiang
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hi, I bought this printer from a friend, and the adjustment screw on the control board broke and I n...
Date Added: 11/02/2016 by Zack Kramme
Displaying 3201 to 3300 (of 3673 reviews)
TOP