Reviews
Displaying 3101 to 3200 (of 3673 reviews)
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Thank you for all your help on my installation of this auto level. The instructions on the Wiki are ...
Date Added: 03/20/2017 by Justin McNeill III
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Will somebody answer to me?
Its been 3 days now
no answer!!!
I still have a problem check the forum:...
Date Added: 03/20/2017 by IASON FOTOPOULOS
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi Alexander ,pls email to our technican for help:technical@geeetech.com
Date Added: 03/20/2017 by Zina Luo
Assembled MK8 extruder
Hi Jack,yes ,it does.
Date Added: 03/20/2017 by Zina Luo
Assembled MK8 extruder
Hi Jack,yes it does.
Date Added: 03/20/2017 by Zina Luo
Assembled MK8 extruder
Hi John,you can check the specification and compare it.
Date Added: 03/20/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
hi there when you show how to setup the configuration h and the H pins you show pins for ultimaker c...
Date Added: 03/19/2017 by Alexander Forbes
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Here you're the support for the pro C with metal carrier for dual extruders: http://www.thingiverse....
Date Added: 03/19/2017 by Guido Sandra
Assembled MK8 extruder
Does this work with Me Ducer?
Date Added: 03/19/2017 by Jack Quon
Assembled MK8 extruder
hi dose this work with the anet a8 thanks
Date Added: 03/19/2017 by john beard
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hi Iason,thank you for reaching us .You can take this for referrence :http://www.geeetech.com/forum/...
Date Added: 03/15/2017 by Zina Luo
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Every think OK. Build was easy and manual ok.
I have a big problem with the X axis. Its going the ot...
Date Added: 03/15/2017 by IASON FOTOPOULOS
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi Aage,could you pls list you problem by details to our technican :technical@geeetech.com he will c...
Date Added: 03/14/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
HI Alexander ,thank you for reaching us.You can list your problem by detail to our technican for hel...
Date Added: 03/14/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi Zina would you please have a look at my configuration H file to see where i am going wrong as sai...
Date Added: 03/14/2017 by Alexander Forbes
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello Geeetech
I purchased a Geeetech 3DTouch auto bed leveling sensor and put it up on my i3 Pro B ...
Date Added: 03/14/2017 by Aage Rasmussen
3D Printer MK8 Extruder Hot End Kit
Hi Cristian ,glad to hear that.Which printer you are ?
Date Added: 03/13/2017 by Zina Luo
3D Printer MK8 Extruder Hot End Kit
muy buena impresora quede impresinado con la calidad de impresion
Date Added: 03/13/2017 by Cristian Farid Facundo Tlapale
3D Printer MK8 Extruder Hot End Kit
ya tengo esta impresora y es excelente la mejor.
Date Added: 03/13/2017 by Cristian Farid Facundo Tlapale
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
yes ,the short distance and right hand one is suitable .
Date Added: 03/12/2017 by Zina Luo
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
will this fit the mecreator 2 extruder?
Date Added: 03/11/2017 by Aaron Glafenhein
Acrylic Prusa I3 PRO B 3D Printer DIY kit
You are welcome .
Date Added: 03/10/2017 by Zina Luo
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Dear Zina Luo, thank you very much for your response!
Date Added: 03/10/2017 by Denis Eduardo Donadon Torres
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hi Denis,you can check the manual of the 3D touch and if you still have any problem you can email to...
Date Added: 03/08/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello Sandra ,you can check the detail on the manual :https://www.geeetech.com/Documents/3DTouch%20a...
Date Added: 03/08/2017 by Zina Luo
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hi, I bought this printer and I also bought a "3DTouch auto bed leveling sensor", how can I install ...
Date Added: 03/07/2017 by Denis Eduardo Donadon Torres
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello, Please tell me where I need to install the sensor, and what holder and where exactly?
Date Added: 03/07/2017 by Sandra Wagner
Nema17 Stepper motor 42SHD3418-24B15
Hi Marijan,yes you can use this stepper motor .
Date Added: 03/07/2017 by Zina Luo
Nema17 Stepper motor 42SHD3418-24B15
I have M201 with GTM32 pro board and driverA4988 , and stepper motors on Z - axe 42SHD0034-20B which...
Date Added: 03/06/2017 by MARIJAN BUJANIC
Geeetech 3D Touch V3.2 Auto Leveling Sensor
hi ,pls email to our technican to help:technical@geeetech.com
Date Added: 03/06/2017 by Zina Luo
Assembled MK8 extruder
Hello paulo,which STL you would like pls email to our sales and she will help you :sales@geeetech.co...
Date Added: 03/06/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
How to connect this sensor to Geeetech prusa I3 A Pro 3D? The needed connection pins are not on the ...
Date Added: 03/03/2017 by Bernd Rothbrust
Assembled MK8 extruder
Hello, where can i have the stl of the aluminum part, the one where the filaments enters? thank you
Date Added: 03/03/2017 by Paulo Silva
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi Cico,sorry that this cannot use for the M201 printer.
Date Added: 03/02/2017 by Zina Luo
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
Hi Danilo,this one is suitable for the GT2560.
Date Added: 03/02/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
When this will be available for M201 printer with GTM32pro board ?
Date Added: 03/02/2017 by CICO theMajstor
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
Seems this is not a pwm fan that can be used with gt2560. Could you please suggest the right one?
Date Added: 03/02/2017 by Danilo Tappia
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi Justin,here is the manual you can check it:https://www.geeetech.com/Documents/3DTouch%20auto%20le...
Date Added: 02/28/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
I have the I3 Pro B, and am just trying to check out the software before I purchase the leveler. I c...
Date Added: 02/28/2017 by Justin McNeill III
Assembled MK8 extruder
Hi Jorge,yes that we have the left hand extruder,You can remark to the order when you would like to ...
Date Added: 02/28/2017 by Zina Luo
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hi,The short distance right hand one now have stock ,you can order it.
Date Added: 02/28/2017 by Zina Luo
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hello Gabriel,the pro B can upgrade to the pro C ,you can take this wiki for a reference :http://www...
Date Added: 02/28/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi Justin,could you pls list your detail to my email and tell me which printer you are :zina.luo@gee...
Date Added: 02/28/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Can't find the reference to "pins-h" in the firmware installation. Seems to be missing in my softwar...
Date Added: 02/27/2017 by Justin McNeill III
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Is it possible to add a second extruder later on like a self-upgrade to a pro c. For now, I can only...
Date Added: 02/25/2017 by Gabriel Helmus
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hi, as far as I can see the left hand kit is not compatible with Prusa i3 Pro B as the motor would i...
Date Added: 02/25/2017 by Cesare Giammiro
Assembled MK8 extruder
Hi, could you tell me if there is an extruder for the left side ? This extruder is for right side, w...
Date Added: 02/25/2017 by JORGE M LOPES
3D Printer MK8 Extruder Hot End Kit
sorry that cannot.
Date Added: 02/25/2017 by Zina Luo
Nema17 Stepper motor 42SHD3418-24B15
for the stepper motor can be used on M201 .
Date Added: 02/25/2017 by Zina Luo
Nema17 Stepper motor 42SHD3418-24B15
Can I change my motors 42SHD0217-24B from my M201 printer with this "bigger" motors on my Z axes ? D...
Date Added: 02/24/2017 by CICO theMajstor
3D Printer MK8 Extruder Hot End Kit
Hi, is this the correct part for a g2s pro?
Date Added: 02/23/2017 by John Robertson
3D Printer MK8 Extruder Hot End Kit
Hi Mauro,yes .It's the 1.75mm one,can be used on the pro B .
Date Added: 02/23/2017 by Zina Luo
3D Printer MK8 Extruder Hot End Kit
Hi, is it ok for a 1.75mm filament? (I have got your prusa I3 pro B MK8 extruder 1.75mm) Thanks. Mau...
Date Added: 02/22/2017 by Mauro Castelli
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hello Alan,the Aluminum feeder has different bearing between the plastic one ,so need purchse the wh...
Date Added: 02/22/2017 by Zina Luo
3D Printer MK8 Extruder Hot End Kit
hello michael,pls send me your order number and i will help you check the status.
Date Added: 02/22/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello Ross, sorry that the G2S printer cannot support the 3D touch sensor.Pls note with thank.
Date Added: 02/22/2017 by Zina Luo
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hello,Actually,you can modify the direction of your extruder in the firmware then upload it.
And yo...
Date Added: 02/22/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello ,the gt2560 rev a board have no wired connection ,need to solder by yourself,you can check the...
Date Added: 02/22/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello Bertrand ,it's ok.For the cooling fan our technican said logically can add one more ,you can s...
Date Added: 02/22/2017 by Zina Luo
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
Hello Yves,sounds great.
Date Added: 02/22/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello Aurelie,sorry that the M201 cannot support the 3D touch sensor .
Date Added: 02/22/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi,
sorry if double post (first seems not to be posted)
I ordered this kit for my Geeetech prusa I3 ...
Date Added: 02/20/2017 by BERTRAND CELERS
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello. Does it fit the M201 ? Many thanks
Date Added: 02/19/2017 by aurelie cozette
2pcs* 4010/DC 12V Cooling Fan for Extruder Hotend/ Control Board/40x40x10mm
thanks,my order is very good
Date Added: 02/18/2017 by Yves ARTIGUE
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi i bougth i3 pro b with the gt2560 rev a, and the 3dtouch auto bed, but my board dont have the wir...
Date Added: 02/17/2017 by Ernesto Dueñas
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hello. Ive ordered the left hand one you suggested, howecer this doesnt fit the geeetech i3 pro b.
...
Date Added: 02/16/2017 by Felix Jansen
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Greetings Geeetech!
This auto levelling sensor looks compatible with the Delta Rostock G2S Pro - Is ...
Date Added: 02/15/2017 by Ross Gordon
3D Printer MK8 Extruder Hot End Kit
Why can I not track my order??
Date Added: 02/14/2017 by Michael Moran`
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hi, Are the tension lever, idler wheel, bearing & cover compatable with the plastic mounting bracket...
Date Added: 02/14/2017 by Alan Gingold
Acrylic Prusa I3 PRO B 3D Printer DIY kit
hello Justin,you can send email to me :zina.luo@geeetech.cn and i can send a STL file for you to pri...
Date Added: 02/13/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
It depends on the distance between the nozzle to the main board.
Date Added: 02/13/2017 by Zina Luo
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
hello Duilio,if you used 2 left hand it's too closed for the 2 extruders to print.The long distance ...
Date Added: 02/13/2017 by Zina Luo
3D Printer MK8 Extruder Hot End Kit
you can remark the size to the sale.Here he cannot note.
Date Added: 02/13/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello Alin,have you check the manual ? if you still can not sovle the problem you can emial to our t...
Date Added: 02/13/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Please help me, my printer Geetech prusa i3 pro B take probe only from middle of the print table !! ...
Date Added: 02/13/2017 by Mariu Alin
3D Printer MK8 Extruder Hot End Kit
I need 0.3mm nozzles for the 4 I just ordered
Date Added: 02/10/2017 by Michael Moran`
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
Hello, i need the feeder kit for my Delta Rostock mini G2S pro. Since there are 2 extruders, i need ...
Date Added: 02/10/2017 by Duilio Benzi
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi,
how long the connection wires, it takes the extensions
Date Added: 02/10/2017 by Puggioni Gianpaolo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
I have a geetech aluminum I3 and I see in the comments that it will work if I have a certain board? ...
Date Added: 02/09/2017 by William Chisholm
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Thanks, also ended up breaking the acrylic part for the Y step motor mount "I3-13". Is this also ava...
Date Added: 02/08/2017 by Justin McNeill III
3D Printer MK8 Extruder Hot End Kit
Hi ,it's 0.4mm one ,which kind you would like i can ask our warehouse to arrange .
Date Added: 02/07/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi Randy ,what happened to the paypal payment? The website accept the paypal payment.
Date Added: 02/07/2017 by Zina Luo
Assembled MK8 extruder
thank you.
Date Added: 02/07/2017 by Zina Luo
Assembled MK8 extruder
Hi Dave,yes it can work with the A pro ,but if you want to upgrade your A pro to the dual extruders ...
Date Added: 02/07/2017 by Zina Luo
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hi Justin,you can order here:https://www.geeetech.com/2pcs-lm8uu-linear-bearings-p-6-
73.html ,it's th...
Date Added: 02/07/2017 by Zina Luo
Acrylic Prusa I3 PRO B 3D Printer DIY kit
I had defective part - the linear bearing part Number 36 (LM8UU). The ball bearings fell out. How do...
Date Added: 02/07/2017 by Justin McNeill III
3D Printer Brass M6 nozzle for MK8 extruder/0.3mm
Hi ,is this one:https://www.geeetech.com/brass-m6-nozzle-for-mk8-extrude-
r-p-904.html
Date Added: 02/07/2017 by Zina Luo
MK8 drive gear
yes ,this one is compatible with the prusa I3 pro B ,you can order it online.
Date Added: 02/07/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi,sounds great that you have one on your pro X ,but sorry that the Me creator2 printer cant support...
Date Added: 02/07/2017 by Zina Luo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi. will this one work with the Me Creator 2? ive already have the i3 pro X and im really happy with...
Date Added: 02/07/2017 by BERNARDO SEJAS
MK8 Extruder Aluminum feeder Kit for 1.75mm filament, for single extruder printer A10 A20 A30, can not fit A10M A20M A30M A10T A20T A30T
I need both sides for my i3 Pro C. When will the right hand feeders be back in stock?
Date Added: 02/06/2017 by Matthew Sheldon
MK8 drive gear
Is what it is compatible with the Geeetech i3 pro b Thank you in advance
Date Added: 02/06/2017 by Raphael Spigarelli
3D Printer Brass M6 nozzle for MK8 extruder/0.3mm
Is what it is compatible with the Geeetech i3 pro b Thank you in advance
Date Added: 02/06/2017 by Raphael Spigarelli
Assembled MK8 extruder
I want to buy one of these today if it will work with my Geeetech Prusa i3 A pro. It works great and...
Date Added: 02/05/2017 by Dave Dutton
Geeetech 3D Touch V3.2 Auto Leveling Sensor
If any one needs one on one support let me know, because whats your time worth?. georges3dprinters.c...
Date Added: 02/03/2017 by George Robles
Assembled MK8 extruder
Excellent. Fast shipping.
Date Added: 01/31/2017 by William Cooper
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Won't allow me to pay for item on PayPal.
Date Added: 01/31/2017 by Randy Blaisure
3D Printer MK8 Extruder Hot End Kit
What size hole is on the M8 hot end?
Date Added: 01/30/2017 by Percy Armstrong
Acrylic Prusa I3 PRO B 3D Printer DIY kit
Hello, I've received my pro b printer few days ago and assembled it with success. Now I'm facing a p...
Date Added: 01/21/2017 by Marc Le Guen
Hybrid stepper motor 42SHD0034-20B for 3D printer
Hello I want ask if there is possibility to replace this stepper in my PI3 proB with one with step a...
Date Added: 01/18/2017 by Lubomir Kalman
Displaying 3101 to 3200 (of 3673 reviews)
.jpg "Nema17 Stepper motor 42SHD3418-24B15")
TOP