Reviews
Displaying 201 to 300 (of 2277 reviews)
A10/ A10 Pro/ A20/ A30 Pro 24V Printing Head, Single Extruder Hotend, 24V 40W, 85mm long heating rod, for V4.1B board version printer only
Does this fit a A30 - not Pro?
Date Added: 10/03/2024 by Christian Boettger
{3KG} ABS-Like Resin Grey
Is this type of resin water washable or only with alcool?
Date Added: 10/02/2024 by Francesco Bucolo
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi, I have an ender 3 with a very old v1.1.4 card, I would like to know if there is a suitable firmw...
Date Added: 10/01/2024 by Patrik Capobianco
1 Meter 2GT Belt (sold by meter)
Does it fit A30 (not Pro)?
Date Added: 10/01/2024 by Christian Boettger
A30M 2 in 1 out Y type dual extruder hotend
Hello,
Please provide pictures of broken fans and product code,this is my mailbox:myorder@geeetech....
Date Added: 09/29/2024 by Geeetech Staff
PLA Black 3D Printer Filament 1.75mm 1kg/roll
Hello,
If the printer has encountered technical problems,
you
can contact our technical support...
Date Added: 09/29/2024 by Geeetech Staff
US Version UV Curing Light UV Lights 405nm
Hello,
Please rest assured, the order have issued to you, I have send the tracking number to you b...
Date Added: 09/21/2024 by Geeetech Staff
{4KG}ABS+ Black 3D Printer Filament 1.75mm 1kg/roll
Hello,
It will arrive at the overseas warehouse soon， if you have any questions you can contact my ...
Date Added: 09/21/2024 by Geeetech Staff
ABS+ Green 3D Printer Filament 1.75mm 1kg/roll
Hello,
Nyou can refer to this printing recomend: ozzle about 240 degrees, hot bed about 90 degrees,...
Date Added: 09/21/2024 by Geeetech Staff
ABS+ White 3D Printer Filament 1.75mm 1kg/roll
Hello,
the filaments are high temperature resistant and have good stability.
Date Added: 09/21/2024 by Geeetech Staff
TPU Transparent 3D Printer Filament 1.75mm 1kg/roll
Hello,
thanks for your support, if you have any questions you can contact me any time, thanks a lo...
Date Added: 09/21/2024 by Geeetech Staff
ABS+ White 3D Printer Filament 1.75mm 1kg/roll
ABS+: what is the temperature stability of the printed parts?
Date Added: 09/17/2024 by Christian Böttger
ABS+ Green 3D Printer Filament 1.75mm 1kg/roll
Ib the product info: "/Nozzle Temperature 230-240℃, bed 85℃ .", but in the table "recommendet settin...
Date Added: 09/17/2024 by Christian Böttger
TPU Transparent 3D Printer Filament 1.75mm 1kg/roll
How clear is the transparent clear tpu?
Date Added: 09/15/2024 by Aiden Mather
PLA Black 3D Printer Filament 1.75mm 1kg/roll
Hi, could you produce a spec sheet, so that I can print it out and keep it for reference when using ...
Date Added: 09/08/2024 by Fred Kaz
{4KG}ABS+ Black 3D Printer Filament 1.75mm 1kg/roll
When will ABS filament be available in the US again?
Date Added: 08/30/2024 by Brad Hicks
US Version UV Curing Light UV Lights 405nm
Hi I need to know when you will be sending the invoice and the tracking number to follow up the deli...
Date Added: 08/29/2024 by Viviana Carcavallo
A20M GT2560 V4.1B Control Board, before order pls check which board does your printer has
Hello,
if you have any questions you can contact my mailbox:myorder@geeetech.com, thanks again.
Date Added: 08/21/2024 by Geeetech Staff
ABS+ Apple Green 3D Printer Filament 1.75mm 1kg/roll+
Dear customer ,
Thanks for your love and support for our filaments, welcome back again, have a nice...
Date Added: 08/21/2024 by Geeetech Staff
10pcs 100Kohm NTC Thermistors for heated bed
Dear customer,
This is product link:https://www.geeetech.com/10pcs-100kohm-ntc-thermistors--
for-heat...
Date Added: 08/21/2024 by Geeetech Staff
{10KG} PETG Black 3D Printer Filament 1.75mm 1kg/roll
Dear customer,
Thanks for your love and support for our filament,have a nice day.
Date Added: 08/21/2024 by Geeetech Staff
PLA Silk Copper 3D Printer Filament 1.75mm 1kg/roll
Dear customer,
Plese rest assured,I will send the invoice to you through mailbox, thanks fr your su...
Date Added: 08/21/2024 by Geeetech Staff
PLA Silk Copper 3D Printer Filament 1.75mm 1kg/roll
i need the invoice ( german ) for my order 20240812203933574 Greeting Schulz
Date Added: 08/15/2024 by Mario Schulz
A30M 2 in 1 out Y type dual extruder hotend
Can I install a blower fan on my geeetech a30m and does it need anything for the blower fan?
Date Added: 08/10/2024 by Joe Zhamg
{10KG} PETG Black 3D Printer Filament 1.75mm 1kg/roll
I tested a few Filaments and this one was the best. I print a lot of stuff in black so it made sense...
Date Added: 08/06/2024 by Martin Linzmayer
10pcs 100Kohm NTC Thermistors for heated bed
Hi,_br_I'm looking for thermistor for hotend, printing machine Mizar S._br_Where can i find that?_br...
Date Added: 08/05/2024 by Mauro Vaccari
ABS+ Apple Green 3D Printer Filament 1.75mm 1kg/roll+
Very beautiful and high-quality plastic! Thank you! Highly recommend!
Date Added: 08/01/2024 by Valera Perinski
A20M GT2560 V4.1B Control Board, before order pls check which board does your printer has
A20M GT 2560 V4 PEUT_ON LA REMPLACER PAS UNE A2OM GT2560 V4.1
Date Added: 07/31/2024 by denis charbonnier
Geeetech THUNDER High Speed 3D Printer , Up to 300mm/s, X/Y Axis Closed-loop Control, Print Volume 250*250*260mm
Hello ,
Thanks for your consult , if you 3D printer technology issue , you can contact our technica...
Date Added: 07/29/2024 by Geeetech Staff
Geeetech THUNDER High Speed 3D Printer , Up to 300mm/s, X/Y Axis Closed-loop Control, Print Volume 250*250*260mm
Was able to fast print out of the box, very nice. I'm having also problems with the ABL. It doesn't ...
Date Added: 07/25/2024 by Yoram Shechori
{4KG}PLA (Black+White) 3D Printer Filament 1.75mm 1kg/roll
Hello ,
normally 5 -7 days , if you have any questions you can contact my mailbox :myorder@geeetec...
Date Added: 07/22/2024 by Geeetech Staff
{10KG}PLA White 3D Printer Filament 1.75mm 1kg/roll
Hello ,
Please rest assured , you can try to use other payments methods : stripe or credit card , t...
Date Added: 07/22/2024 by Geeetech Staff
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello ,
You can refer to installing video :
https://www.youtube.com/watch?v=YmXwFmB4qys
3Dtouc...
Date Added: 07/22/2024 by Geeetech Staff
A30T Printer GTM32_103_V1 Control Board
Hello ,
You can contact our technical support mailbox :support@geeetech.com or
create a ticket on ...
Date Added: 07/22/2024 by Geeetech Staff
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello ,
It is suitable for mizar max printer ,this is Specific methods of use :
3Dtouch installat...
Date Added: 07/22/2024 by Geeetech Staff
{10KG}PLA White 3D Printer Filament 1.75mm 1kg/roll
I want to order.Why can´t i pay.
Date Added: 07/21/2024 by Stephan Sallinger
PLA Black 3D Printer Filament 1.75mm 1kg/roll
Dear customer ,
if you have any problems you can contact me mailbox :myorder@geeetech.com , thanks ...
Date Added: 07/19/2024 by Geeetech Staff
PLA Black 3D Printer Filament 1.75mm 1kg/roll
I need the data sheet for your offered PLA
Date Added: 07/17/2024 by Marno Bönicke
{4KG}PLA (Black+White) 3D Printer Filament 1.75mm 1kg/roll
What is the average delivery time to Portugal? Best regards
Date Added: 07/13/2024 by Miguel Vieira
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Bonjour, je viens de recevoir le mien mais malheureusement les connecteurs ne sont pas compatibles a...
Date Added: 07/10/2024 by thomas delnoy
A30T Printer GTM32_103_V1 Control Board
I would like to adjust the extruder E-steps on a A30T. How can this be done? If i extrude 100mm fila...
Date Added: 07/08/2024 by Ronny Verminck
Geeetech 3D Touch V3.2 Auto Leveling Sensor
bonjour,est ce qu'il fonctionne avec la Mizar Max et quel firmware faut installer ?
Date Added: 07/08/2024 by thomas delnoy
PETG Black 3D Printer Filament 1.75mm 1kg/roll
hello ,
if filaments have any quality problems , you can contact my mailbox:myorder@geeetech.com ,I...
Date Added: 07/05/2024 by Geeetech Staff
Alkaid LCD Printer FEP Sheet * 5 pcs
Hello ,
Thanks for your advice , we will adopt your advice and shipping FEP sheet to the EU wareh...
Date Added: 07/04/2024 by Geeetech Staff
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
Hello ,
Did you send problems to this email address：myorder@geeetech.com ， thanks for your support ...
Date Added: 07/04/2024 by Geeetech Staff
100Kohm NTC Thermistors for JIETAI hotend
Hello ,
you
can contact our technical support mailbox :support@geeetech.com or
create a ticket o...
Date Added: 07/04/2024 by Geeetech Staff
Hollow Filament Spool Holder
Hello ,
You can send your questions to my email address :myorder@geeetech.com , thanks again , hav...
Date Added: 07/04/2024 by Geeetech Staff
TPU Transparent Green 3D Printer Filament 1.75mm 1kg/roll
Hello ,
TPU consumables are all Shaw India 95A, and it is recommended to use a short-range printer....
Date Added: 07/04/2024 by Geeetech Staff
Stepper Motor D42HS3420-18D
Hello ,
It is not fit for your A10M , this is stepper motor for A10M link: https://www.geeetech.com...
Date Added: 07/04/2024 by Geeetech Staff
Grey TG-21 3D Printing Pen
Hello ,
Please rest assured , the order shipping info I have sent to your mailbox , please check it...
Date Added: 07/04/2024 by Geeetech Staff
Grey TG-21 3D Printing Pen
Habe nur ein Teil meiner Bestellung erhalten. Seit 2 Monaten keine Antwort auf meine E-Mail. Grey TG...
Date Added: 07/03/2024 by paul frommann
Stepper Motor D42HS3420-18D
Hi, this fit my A10M?_br_
Date Added: 07/02/2024 by Luiz Assis
TPU Transparent Green 3D Printer Filament 1.75mm 1kg/roll
What shore hardness?
Date Added: 06/29/2024 by Kardo Karim
Hollow Filament Spool Holder
Hello, can I mount it on a a20m printer?_br_Thanks
Date Added: 06/25/2024 by Salvo Paesano
100Kohm NTC Thermistors for JIETAI hotend
I have a MeCreator2 and the hot end extruder thermistor is not working._br_Is this the correct part ...
Date Added: 06/22/2024 by Nick Marson
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
I contacted you per email, but I´m still waiting for answer to my e-mail to you ..
Date Added: 06/19/2024 by Dieter Bauer
Alkaid LCD Printer FEP Sheet * 5 pcs
STOP CLAIMING THE FEP / TANK ARE IN STORE AT EU WAREHOUSE! THEY ARE NOT AVAILABLE FOR PURCHASE FROM ...
Date Added: 06/18/2024 by Maarten Devillé
PETG Black 3D Printer Filament 1.75mm 1kg/roll
I had a problem with one of the rolls. It kept jamming in the printer because it was too thick. So f...
Date Added: 06/17/2024 by javier Valdeolmillos
A30T Printer GTM32_103_V1 Control Board
Hello ,
you can contact my mailbox :myorder@geeetech.com , I will send you full pin schematic of t...
Date Added: 06/15/2024 by Geeetech Staff
TPU Black 3D Printer Filament 1.75mm 1kg/roll
Hello ,
Thanks for your suppot and recognize , welcome back again , hope you have a good day .
Date Added: 06/15/2024 by Geeetech Staff
A10Pro A10M A10T Magnetic Flexible Removable Printing Platform
Hello ,
Thanks for your suppot and recognize , welcome back again , hope you have a good day .
Date Added: 06/15/2024 by Geeetech Staff
ALKAID LCD Light Curing Resin 3D Printer
Dear customer ,
If it can be used normally, it is not recommended to replace it , if you have any ...
Date Added: 06/15/2024 by Geeetech Staff
Alkaid LCD Printer Resin Tank, including assembly tank * 1 and spare FEP Sheet * 1.
Hello ,
Thanks for your feedback, the fep sheet in stock at European warehouse , this is product li...
Date Added: 06/15/2024 by Geeetech Staff
A30T Printer GTM32_103_V1 Control Board
Hello,
Please rest assured , the controlboard have issued to you , this is your tracking number : ...
Date Added: 06/15/2024 by Geeetech Staff
Alkaid LCD Printer FEP Sheet * 5 pcs
Dear customer ,
Please rest assured , your order have issued to you , this is tracking number : 4PX...
Date Added: 06/15/2024 by Geeetech Staff
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Dear customer,
3D touch is suitable for A30 printer , you can contact my mailbox : myorder@geeet...
Date Added: 06/15/2024 by Geeetech Staff
A30T Printer GTM32_103_V1 Control Board
Hello ,
Regarding of 3D touch leveling problems , you can contact our technical support mailbox :su...
Date Added: 06/15/2024 by Geeetech Staff
PLA Matte Black 3D Printer Filament 1.75mm 1kg/roll
Hello,
This is matte black , if you have any questions you can contact my mailbox : myorder@geeetec...
Date Added: 06/15/2024 by Geeetech Staff
{4KG}PLA Luminous (Blue + Yellow + Rose Red + Multicolor) 3D Printer Filament 1.75mm 1kg/roll
Hello,
Thanks for your support , hope you have a good day .
Date Added: 06/15/2024 by Geeetech Staff
PLA Purple 3D Printer Filament 1.75mm 1kg/roll
Hello ,
THanks for your support , The freight is calculated by the system according to the distance...
Date Added: 06/15/2024 by Geeetech Staff
ALKAID LCD Light Curing Resin 3D Printer
Hello,
Thanks for your support and recognize , welcome back again ,hope you have a good day .
Date Added: 06/15/2024 by Geeetech Staff
Green ABS-Like Resin 1KG, High Compatible for Most LCD and DLP 3D Printer
hello ,
regarding of prining mathoads problems , you
can contact our technical support mailbox :...
Date Added: 06/15/2024 by Geeetech Staff
Green ABS-Like Resin 1KG, High Compatible for Most LCD and DLP 3D Printer
Are there any recommended settings for this product?
Date Added: 06/12/2024 by Helge David
ALKAID LCD Light Curing Resin 3D Printer
Amazing... This printer is brilliant so easy to set up and use.
Date Added: 06/10/2024 by David Bird
PLA Purple 3D Printer Filament 1.75mm 1kg/roll
I love this filament works great at high speeds in fact I use my hyper pla settings on my k1 max and...
Date Added: 06/08/2024 by Mark Featherstone
{4KG}PLA Luminous (Blue + Yellow + Rose Red + Multicolor) 3D Printer Filament 1.75mm 1kg/roll
Your writing is always so thorough. Thanks for sharing. _a href="https://www.linkedin.com/pulse/cali...
Date Added: 06/06/2024 by Niko Stern
PLA Matte Black 3D Printer Filament 1.75mm 1kg/roll
Is this regular PLA? Not PLA+, PLA Plus, PLA Pro, right?
Date Added: 06/04/2024 by Abraham Padilla
A30T Printer GTM32_103_V1 Control Board
I would like a full schematic of the board as I need to repair it until the spare one that I have or...
Date Added: 06/03/2024 by Florin Mitrofan
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hello, have A30 printer and on my printer there is only on 3 pin connector. I cannot connect the 3 +...
Date Added: 06/02/2024 by Matthias Hoffmann
A30T Printer GTM32_103_V1 Control Board
I have A30T Printer GTM32_103_V1 Control Board_br_I need a full pin schematic of the board.
Date Added: 06/02/2024 by Florin Mitrofan
Alkaid LCD Printer FEP Sheet * 5 pcs
Salve, ho acquistato alcuni accessori per la mia Geeetech alkaid, secondo il programma di tracking s...
Date Added: 06/02/2024 by Massimiliano Ceccato
A30T Printer GTM32_103_V1 Control Board
Please see ticket Y8TDvc13. My faulty motherboard was supposed to be replaced. Please see the last p...
Date Added: 06/02/2024 by Ronald Heacock
Alkaid LCD Printer Resin Tank, including assembly tank * 1 and spare FEP Sheet * 1.
dopo pochi mesi l'anello di supporto fep è gia rotto. vedo che siamo in tanti con lo stesso problema...
Date Added: 05/30/2024 by Aron Castelli
TPU Black 3D Printer Filament 1.75mm 1kg/roll
I use TPU generic, and its perfect
Date Added: 05/29/2024 by Verena Rappl
A10Pro A10M A10T Magnetic Flexible Removable Printing Platform
Great Product, very efficient delivery.
Date Added: 05/28/2024 by Colin Baker
ALKAID LCD Light Curing Resin 3D Printer
While cleaning a resin spill I also managed to scrape parts of that UV filter on the screen, so some...
Date Added: 05/26/2024 by Filip Petrina
10pcs 100Kohm NTC Thermistors for heated bed
Dear customer,
You can choose amozon ,aliexpress or ebay platform to purchase it , thanks a lot, ...
Date Added: 05/23/2024 by Geeetech Staff
Alkaid LCD Printer Resin Tank, including assembly tank * 1 and spare FEP Sheet * 1.
Dear customer ,
We will resend you a resin tank for you , thanks for your support , hope you have...
Date Added: 05/23/2024 by Geeetech Staff
Alkaid LCD Printer Forming Platform + Attachment Bracket
Dear customer ,
Really sorry if you have any questions you can contact me any time , hope you hav...
Date Added: 05/23/2024 by Geeetech Staff
New Upgrade Removable Spring Steel Magnetic Platform 310*310mm
Dear customer ,
We will try to improve this problem, thanks for your feedback ,hope you have a g...
Date Added: 05/23/2024 by Geeetech Staff
GCW02 Washing and Curing Machine
Dear customer ,
Thanks for your feedback ,we will make positive to adopt your advice , hope you h...
Date Added: 05/23/2024 by Geeetech Staff
Alkaid LCD Printer 6.08 Inch Print Screen
Dear customer ,
you can contact our technical support mailbox :support@geeetech.com or
create ...
Date Added: 05/23/2024 by Geeetech Staff
PLA White 3D Printer Filament 1.75mm 1kg/roll
Dear customer ,
We will investigate the cause of parcel loss to the logistics provider and And se...
Date Added: 05/23/2024 by Geeetech Staff
Blue Standard Resin 1KG, UV 405nm, for LCD/DLP/SLA 3D Printers
Dear customer ,
Thanks for your support and recognize , hope you have a good day .
Date Added: 05/23/2024 by Geeetech Staff
Alkaid LCD Printer FEP Sheet * 5 pcs
Dear customer ,
The FEP sheet is in stock on EU warehouse , this is product link : https://www.ge...
Date Added: 05/23/2024 by Geeetech Staff
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
Dear customer ,
if you have any questions you can contact me through this mailbox : myorder@geee...
Date Added: 05/23/2024 by Geeetech Staff
TPU Black 3D Printer Filament 1.75mm 1kg/roll
Dear customers ,
you can contact our technical support mailbox :support@geeetech.com or
creat...
Date Added: 05/23/2024 by Geeetech Staff
TPU Black 3D Printer Filament 1.75mm 1kg/roll
What are the exact settings for the Geeetech TPU 95A for the Bambulab X1 Carbon? It would be wonderf...
Date Added: 05/21/2024 by Elsa Claus
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
I got this auto leveler and a mizar max. But I don´t find a socket for the plugs of the leveler._br_...
Date Added: 05/20/2024 by Dieter Bauer
TPU Black 3D Printer Filament 1.75mm 1kg/roll
Dear customer ,
The system will calculate the corresponding freight according to your delivery ad...
Date Added: 05/18/2024 by Geeetech Staff
Displaying 201 to 300 (of 2277 reviews)
TOP