X
[Matte Terracotta PLA] -- This newly launched filaments can output frosted texture，different from glossy pla ，
it's low-key and mysterious, present a better printing effect-which definitely gives eye-catching.
[Easy to Print] --As easy to print as regular pla, get quality prints with sharp details.
Recommended Extrusion/Nozzle Temp: 190C-220C (374℉~428℉), Heated Bed Temp: 50C-70C(122℉~158℉).
[Dimensional Accuracy Consistency] -- 1 kg spool (2.2lbs), Dimensional accuracy 1.75mm+ / - 0.03 mm, Suitable for most FDM 3D printers;
[Vacuum Packing] -- Vacuum sealed with desiccant to maintain low level of moisture content.
please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.
Specs:
Net weight: 1 kg
Color: PLA Matte Terracotta
Filament sizes: 1.75mm
Material: Polylactic Acid
TOP
This is an interesting filament, the matte effect works VERY well, it's got a lovely surface finish and it hides layers lines extremely well. I'm able to print it at layer heights from 0.06mm up to 0.45mm all in one print and still get an even surface finish! It's got good layer adhesion and is a strong material, it has very little ooze or stringing and is able to bridge large distances. It was supplied well packaged and properly dried so it's ready to go straight from the shipping box. There are a couple of things that are a bit less good though, while the layer adhesion is very strong, the bed adhesion is a little weak. I had to run the bed 10C hotter than usual and it still took several tries to get it to stick down properly on larger prints. I'd also say the color name isn't quite right, I'd call it more of a "Salmon Pink" rather than a "Terracotta". Overall still a good filament though and I'll certainly buy others from the Matte PLA range in future as the layer-hiding ability is wonderful.
Hi Stephen, Appreciate your good review and liking of our Matte Terracotta filaments. Our matte series indeed hides layers lines extremely well. . And the print quality is also very good and fluent. If you need any help, you can contact me at this email：myorder@geeetech.com. Have a nice day.
Is it poosible to create a big order like 50+ spools with a lower cost shipping method?
Hi Yaara,we will quote you by email, thank you for your support, have a nice day.