X
How to use:
1、Place the required items in the bag, away from the sealing strip
2、Slide the clip along the mouth of the bag to seal the mouth of the bag (if the clip falls off, you can snap it back into place).
3、Turn the valve counterclockwise to open and remove the pump cover.
4、Install the vacuum pump in the opening of the pump lid to pull out the air.
5、Reinstall the cover into the opening and close it by rotating clockwise.
6、Keep the filament dry.
Bag prameters:
SIZE:39.5*39.5cm
Material:PA+PE
Important Notes:
1、Do not store leather and clothing together with other items.
2、Please do not put leather, clothing and animal fur or food together.
3、Please do not overfill the bag, otherwise it will not be able to close.
4、The sound of the pump will change so that you can hear that it is sealed and impermeable.
5、When the pump is working, it will be hot and cause sound, which is normal.
Notes on sealing tape:
1、After putting in the item, use the small sealing clip to slide from the far left side of the bag to the far right side of the bag, and then slide from the far right side to the far left side, pulling back and forth 2~3 times in this way, instead of always pulling in the same direction 2~3 times;
2, when pumping do not take out the small rubber pad in the pumping valve. If there are too many items in the pumping bag, it is better to use a vacuum cleaner with high motor power, such as the seat vacuum cleaner used in car wash.
3. After pumping, turn off the vacuum cleaner motor, then leave the suction port and press the small rubber pad with your index finger so that the rubber pad is completely absorbed. Cover with the lid, taking care not to fold the bag in half for storage after pumping;
4. Check whether the back of the suction valve is connected to the flat surface of the item before pumping. If there is a gap, it will affect the sealing effect.
Warning:
There is a risk of suffocation, do not allow children to come into contact with it.
TOP