X
.jpg)
.jpg)
3D Touch V3.2 Pro is the new generation hotbed automatic leveling accessory of FDM 3D printer. Built by the latest technology, it can accurately measure the inclination of the hotbed. It can be used for hotbeds made of glass, wood, metal, etc. Users no longer need to manually level the hotbed, bringing users a simpler and faster hot bed leveling experience, and improving the printing success rate and printing accuracy.
Equipped with new structural design for higher precision, features such as beautiful appearance, super high precision, etc.，3D Touch V3.2 Pro can be widely used in various FDM 3D printers, it is a necessary accessory for 3D printers;
Wiring
3-pin: Brown (-, GND), Red (+5V), Orange (control signal)
2-pin: Black (-, GND), White (Z min)
Feature：
l New structural design, higher precision
l Suitable for various materials hotbeds
l New industrial design
l New surface treatment
l High precision, accuracy deviation is ±0.005mm
l Automatic detection after power on
l Abnormal alarm
l More stable and reliable
l Intelligent measurement
1. 3D-touch: 1
2. M3 screws: 4
3. M3 nuts: 2
4. Metal holder: 1
5. 18cm cable: 1
6. 100cm cable: 1
TOP
salve buona sera si puo istallare su mizar s?
OK
Do you have a shipping update?
Hello, I have sent you the tracking number, please check your email!
_br_hello can it be mounted on a mizar s
yes
what is the procedure for mounting the sensor
Here's the link to the video tutorial: https://www.youtube.com/watch?v=4-Zofqk4Mvc
Hola, el nuevo 3D touch V3.2 Pro es compatible con la impresora A10T? Gracias_br_
Hello, yes, it can be used.
Can i use this on my A10M has the 3D Touch 3.2 PRO same conectors and size as the normal 3d touch? is it backward compatible
Hello, yes, it can be used
Will this work with the FLSUN printers? Plug in the robin_nano main board and flash the firmware to Marlin?
hello,pls ask the seller of the machine FLSUN printers if it supports 3dtouch or bltouch, if yes , then our 3d touch can work on it. If you need to install our 3DTouch on another machine, you need to consider two things. Compatibility of hardware and firmware. You need to consider whether there are 3DTouch support pins on the motherboard or extension board. And whether 3DTouch bracket can be installed on printhead. You need also to consider whether the machine is configured with 3DTouch firmware. Our 3dtouch is supported by Marlin. We have a video of 3DTouch installation on YouTube:https://www.youtube.com/watch?v=4-Zofqk4Mvc&t=78s
Does this sensor works with the "older" Geeetech A30 printer (hardware version 3.3 and firmware version V1.37.59)?
Hello, Steven, you can order SKU: 700-001-0969 https://www.geeetech.com/geeetech-3d-touch-v32-auto-leveling-sensor-p-1010.html
I need some help with 3Dtouch v3.2 Pro I just installed it on my geeetech A20 on Tuesday and yesterday I updated the firmware and i try to level it it doesn’t work and i needs help to get it working
hello, if you use it on A20 , need update firmware that support 3d touch . pls check which version control board does your printer has , then update corresponding firmware . if it is V4.0 board , pls update firmware A20_G05(CH340 Support 3Dtouch) https://www.geeetech.com/download.html?download_id=32 and check whether you connect the 3d touch correctly or not .https://www.youtube.com/watch?v=NVi_Ba-aF0U any more question , you can create a support ticket on our website https://www.geeetech.com , My Account --log in --Help&Support ----New ticket , Our technical support will reply you directly.The machine code may at side of the printer . if you do not find/ know the machine code, it does not matter , write any 14 code is fine.
Ist der BL Touch auch für den A30 Pro
yes, it can be used on A30 Pro. pls turn on the auto leveling option , and active 3d touch option on screen if you connect 3d touch