About this item
【Dimensional Accuracy & Consistency】 GEETECH PLA has strict tolerances. Diameter 1.75mm, dimensional accuracy +/- 0.03mm
without any exaggeration. It works and harmonizes perfectly with all common 1.75mm FDM 3D printers.
【1kg (2.2lbs) Spool】Pack of 1 1kg/(2.2lbs) Yellow Color pla. Spool size: Φ200mm/7.9" flange, Φ56mm/2.2" hub hole, 64mm/2.5" width.
Reel is suitable for most trendy printers, Comgrow, Geeetech, Longer, LABISTS, ANYCUBIC.etc
【Easy-to-Use, Clog-Free, Bubble-Free】
Recommended extrusion nozzle temperature 185°C - 215°C, hot bed 25°C - 60°C.
Works perfectly with all common 1.75mm FDM 3D printers.
【Vacuum Packing】– Vacuum sealed with desiccant to maintain low level of moisture content.
And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.
Note: an extra sealed bag is offered to store filament.
Specs:
Net weight: 1 kg
Color: PLA black
Filament sizes: 1.75mm
Material: Polylactic Acid
bonjour comment mettre a jour mon fiimware pour un bl touch dur geeetech a20 m_br_
Please select the file you need in this website. https://www.geeetech.com/download.html
could I have the config files for the PLA black, white and red filament?
hello,we only have config files for 3d printers . you can find it on our website Download area . https://www.geeetech.com/download.html PLA printing temperature is about 210 degrees, the hot bed is 50 degrees, the recommended retraction speed is 40mm/s, the retraction distance is 5.5mm, and the Teflon tube on the hot end need goes deep into the hotend in case of clogging.
Sehr gutes Filament._br_Nutze es jetzt schon sehr lange und habe nur sehr selten Probleme gehabt. Diese wahren aber eher auf Unwissenheit zurück zu führen._br__br_Ich würde mir wünschen wenn man vielleicht die Kunststoffrollen gegen Kartonrollen tauschen würde._br_Sowie vielleicht ein pla+_br_
Thanks a lot for your support Patrik, I will feedback your suggestion to our company
too many colors, can you help me?
Of course, what products will you print?
please send configuration temperature etc
hello, PLA printing temperature is around 210, hot bed is 50 degrees, retraction speed is recommended 40mm/s, retraction distance 5.5mm, pls make sure the hot end Teflon tube goes into deep bottom of hotend in case of get clogged.
do you have the configuration of this pla for simplify3D?
yes, will send to your email
hello, did you have a configuration for the prusa slicer (prusa mini)?
Sorry Max, we don't have the prusa slicer(prusa mini), but you can purchase our pla filament to try,our pla filament with good quality, it can be used in Prusa Mini
May I get the Simplify3D pla profile as well. I have the new black and new white.
sorry , we do not have Simplify3D file. you can refer to cura's configuration file https://www.geeetech.com/download.html?download_id=47