TG-21 3D printing pen
TG-21 is a high-end 3D printing pen that supports ABS, PLA, and PCL filaments. Suitable for 1.75mm filaments that require high,
medium and low temperature printing (wider range of Filaments);
Equipped with LCD screen for displaying printing information, you can intuitively observe the current working status of the printing pen;
Printing speed and printing temperature can be adjusted in real time,printing will not be interrupted during adjusting, which can bring customers a smoother experience;
With easy to grasp ergonomic design and low temperature nozzle that will not burn your hands. At the same time, replaceable pen tip makes cleaning and maintenance easier, pen tip can be removed and replaced without using tools.
The product adopts external power supply mode, which can use power adapter and mobile power supply;
Features:
l Suitable for ABS, PLA, PCL filaments
l Ergonomic grip
l LCD display screen
l 8 gears of speed,adjust in real time without pausing
l Adjust temperature in real time without pausing
l Intelligent sleep mode(pen enters sleep mode if it is not used for 1 minute or has been extruding for 8 minutes)
l Intelligent temperature adjustment
l Stable printing pen holder for safer placement
l Detachable pen tip, easy to clean, damaged pen tip can be replaced
l 6 buttons, easier to operate
l Available in three colors: gray, black, white
Filaments:PCL/PLA/ABS 1.75±0.02mm
Power supply: 5V/2A
Printing temperature:
ABS 180~210℃
PLA 160~210℃
PCL 60~100℃
Working conditions: 10~35℃/RH≤85%
3d pen Size: 175(L)×27(W)×33.5(H)mm
Net weight: 60g
Gross weight: 356g
Package box: 200mmx98mmx55mm
1.3D printing pen: 1
2. Power adapter: 1
3. DC5V USB cable: 1
4. Filament: 2 mters PLA
5. User manual: 1
6. Finger cot: 2
I have the TG-21 3D Pen and the bits it comes with,and I have watched videos(yes,plural,not just one) on how to start playing about with it but I'm getting frustrated now.It loads the filament up and all the other stuff then when it comes to me using it to draw with,I can't get the melted filament out to do a drawing.I press slightly on the nozzle and nothing!?Oh well,I'll keep trying,I must be doing something wrong-I'll keep starting again til I get it right..I hope...
Dear customer , Print pen usage problem ,you can contact our technical supports mailbox : support@geeetech.com or create a ticket on our official website ,hope you have a good day.
give advice to many types, do not know how to choose
Hello dear friend, may I know the exact product you want? 3d printer, filament, or 3d pen?