Reviews
Displaying 1 to 100 (of 2124 reviews)
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
Hi Daniel,
Hope you are doing well.
The cable with one end is 5 pins, and another end not 3+...
Date Added: 02/02/2026 by Geeetech Staff
Geeetech THUNDER High Speed 3D Printer , Up to 300mm/s, X/Y Axis Closed-loop Control, Print Volume 250*250*260mm
Hi Roman,
The thunder printer with a pressure sensor has only stock at the China warehouse.Pls s...
Date Added: 01/26/2026 by Geeetech Staff
Geeetech M1 Mini 3D Printer
Hi Freda,
Hope you are doing well.
You can set the hotbed size to 100*100mm in the slicer so...
Date Added: 01/26/2026 by Geeetech Staff
Geeetech THUNDER High Speed 3D Printer , Up to 300mm/s, X/Y Axis Closed-loop Control, Print Volume 250*250*260mm
When will new Thunder with pressure sensor be available in EU? Where can i buy spare parts for my th...
Date Added: 01/25/2026 by Roman Forster
Geeetech M1 Mini 3D Printer
I used pruaslicer to create a code print project but when I try printing on my mini it prints off th...
Date Added: 01/24/2026 by Freda Floyd
PETG White 3D Printer Filament 1.75mm 1kg/roll
Hi Vincenzo,
Thank you for your inquiry. The PETG printing temperature is 235℃. If you need any ...
Date Added: 01/22/2026 by Geeetech Staff
PETG White 3D Printer Filament 1.75mm 1kg/roll
Ciao, il petg va da 220° a 240°, ma a che velocità? Perché non scrivete anche il range delle velocit...
Date Added: 01/22/2026 by Vincenzo Spatuzzi
PLA Silk Gold 3D Printer Filament 1.75mm 1kg/roll
Hi Arvydas,
Hope you are doing well.
The silk gold will arrive at the EU warehouse in the ne...
Date Added: 01/21/2026 by Geeetech Staff
Geeetech THUNDER High Speed 3D Printer , Up to 300mm/s, X/Y Axis Closed-loop Control, Print Volume 250*250*260mm
Hi Roman,
Hope you are doing well. When Leveling with Touch Sensor,theThunder will save these se...
Date Added: 01/21/2026 by Geeetech Staff
PETG White 3D Printer Filament 1.75mm 1kg/roll
Hi Mark,
Here is the PETG White Recommended extruding temperature 220-240°C, heatbed temperature...
Date Added: 01/21/2026 by Geeetech Staff
Alkaid LCD Printer Resin Tank, including assembly tank * 1 and spare FEP Sheet * 1.
Hi Harm,
Thank you for your inquiry, the resin tank is in stock at the EU warehouse, you can ord...
Date Added: 01/21/2026 by Geeetech Staff
Geeetech THUNDER High Speed 3D Printer , Up to 300mm/s, X/Y Axis Closed-loop Control, Print Volume 250*250*260mm
Hi Mauro,
The Thunder printer with printing Volume 250*250*260mm, Nozzle Max Temperature 250℃, ...
Date Added: 01/21/2026 by Geeetech Staff
Geeetech THUNDER High Speed 3D Printer , Up to 300mm/s, X/Y Axis Closed-loop Control, Print Volume 250*250*260mm
Hi Mauro,
Thank you for your inquiry. This Thunder printer is out of stock now, the Thunder upgra...
Date Added: 01/21/2026 by Geeetech Staff
PETG White 3D Printer Filament 1.75mm 1kg/roll
Is there a filament profile for the Bambu Labs P1S, that I can download, please? I'm not having good...
Date Added: 01/21/2026 by Mark Horsburgh
Geeetech THUNDER High Speed 3D Printer , Up to 300mm/s, X/Y Axis Closed-loop Control, Print Volume 250*250*260mm
When Leveling with Touch Sensor, does Thunder save these settings when i turn it of or do i have to ...
Date Added: 01/20/2026 by Roman Forster
PLA Silk Gold 3D Printer Filament 1.75mm 1kg/roll
Still not in stock in the EU. Discontinued?
Date Added: 01/20/2026 by Arvydas Donauskas
Alkaid LCD Printer Resin Tank, including assembly tank * 1 and spare FEP Sheet * 1.
I would love to know when they are back in stock in eu my tank broke has crack on the botom
Date Added: 01/20/2026 by harm de groot
Geeetech THUNDER High Speed 3D Printer , Up to 300mm/s, X/Y Axis Closed-loop Control, Print Volume 250*250*260mm
avete una macchina con piatto di almeno 300 x 300?_br_
Date Added: 01/17/2026 by Mauro Frigo
Geeetech THUNDER High Speed 3D Printer , Up to 300mm/s, X/Y Axis Closed-loop Control, Print Volume 250*250*260mm
buongiorno. mi incuriosisce molto._br_2 domande: il livellamento è automatico o manuale? ha la possi...
Date Added: 01/17/2026 by Mauro Frigo
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
Did you find the correct cable? the one with a 5 pin plug at each end NOT the 3+2 pins cable. I cann...
Date Added: 01/11/2026 by Daniel Rearden
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi John,
The 3D Touch V3.2 is the new generation hotbed automatic leveling accessory of FDM 3D p...
Date Added: 01/08/2026 by Geeetech Staff
{10KG} PETG Blue 3D Printer Filament 1.75mm 1kg/roll
Hi Patrick,
Thank you for your inquiry and support. The PETG red will arrive at the EU warehouse...
Date Added: 01/08/2026 by Geeetech Staff
{10KG} PETG Blue 3D Printer Filament 1.75mm 1kg/roll
Hallo , wann sind denn die ganzen farben wie rot grün blau wieder im EU Lager verfügbar ?? LG
Date Added: 01/08/2026 by Patrick Hallek
PETG Grey 3D Printer Filament 1.75mm 1kg/roll
Hi Alex,
Thank you for your inquiry.You can select the Generic filaments settings in Bambu slicin...
Date Added: 01/07/2026 by Geeetech Staff
PLA Silk Gold 3D Printer Filament 1.75mm 1kg/roll
Hi Arvydas，
Thank you for your inquiry. The silk gold will come back to the EU warehouse in the ...
Date Added: 01/07/2026 by Geeetech Staff
Geeetech M1 Mini 3D Printer
Hi Corey,
The solution for M1 SD card reformatted issues have been sent to you by email.
Pls ...
Date Added: 01/07/2026 by Geeetech Staff
PLA Silk Gold 3D Printer Filament 1.75mm 1kg/roll
Will it be coming to the EU warehouse any time soon?
Date Added: 01/07/2026 by Arvydas Donauskas
PETG Grey 3D Printer Filament 1.75mm 1kg/roll
Can you provide print parameters for Bambulab P2S (speed, first layer speed, bed temperature etc... ...
Date Added: 01/07/2026 by Alex S
Geeetech M1 Mini 3D Printer
Our SD card had to be reformatted and we lost all of the files that originally game with the card. C...
Date Added: 01/06/2026 by Corey R
{10KG} PETG Transparent 3D Printer Filament 1.75mm 1kg/roll
Hi Lai，
Hope you are doing well.The PETG technical datasheet has been sent to your email, please...
Date Added: 01/06/2026 by Geeetech Staff
PLA Matte Dark Grey 3D printer Filament 1.75mm 1kg/roll
Hi Edmund,
Thank you for your valuable printing advice and support,if you need any help, you can...
Date Added: 01/06/2026 by Geeetech Staff
PETG White 3D Printer Filament 1.75mm 1kg/roll
Hi Arnold,
Appreciate your support and liking of PETG white.
Have a nice day.
Date Added: 01/06/2026 by Geeetech Staff
Geeetech THUNDER High Speed 3D Printer , Up to 300mm/s, X/Y Axis Closed-loop Control, Print Volume 250*250*260mm
Hi Rachel,
Thank you for your inquiry. the Thunder upgrade version Thunder S have stock at the ...
Date Added: 01/06/2026 by Geeetech Staff
Geeetech M1 Mini 3D Printer
Hi Jessica,
These are some free 3D printing model websites:thingiverse, makerworld. You can down...
Date Added: 01/06/2026 by Geeetech Staff
Geeetech M1 Mini 3D Printer
Hi Lauren,
We recommend downloading Orca Slicer software to slice the 3D print file on your comp...
Date Added: 01/06/2026 by Geeetech Staff
Geeetech 3D Touch V3.2 Auto Leveling Sensor
I have an ET4-MB_V1.1 printer and I found a site that shows how to install a CR sensor on it. My que...
Date Added: 01/05/2026 by John Monte
Geeetech M1 Mini 3D Printer
Where can I get more files to add to the SD card with ease? Converting was not working. I also accid...
Date Added: 01/04/2026 by Jessica Murray
Geeetech M1 Mini 3D Printer
Since I only own a Chromebook, will I never be able to use this printer that I already purchased? Th...
Date Added: 01/04/2026 by Lauren Danai
{10KG} PETG Transparent 3D Printer Filament 1.75mm 1kg/roll
Where can I find technical datasheet of greeetech transparent petg filament?
Date Added: 01/04/2026 by C Lai
PLA Matte Dark Grey 3D printer Filament 1.75mm 1kg/roll
a very great color for printing DND terrain and then just use white paint for highlight, you basical...
Date Added: 01/04/2026 by Edmund Elite
PETG White 3D Printer Filament 1.75mm 1kg/roll
i really like the white PETG, it has a nice color :)
Date Added: 01/04/2026 by S. Arnold
Geeetech THUNDER High Speed 3D Printer , Up to 300mm/s, X/Y Axis Closed-loop Control, Print Volume 250*250*260mm
Hi when will it be in stock for EU? Thanks_br_
Date Added: 01/02/2026 by Rachel Levy
Geeetech M1 Mini 3D Printer
Hi Nathan,
Hope you are doing well.
The M1/M1S 3D printer order includes a silk PLA sample i...
Date Added: 12/29/2025 by Geeetech Staff
PLA Luminous Yellow 3D Printer Filament 1.75mm 1kg/roll
Hi György,
Hope you are doing well.
You can select the Generic setting parameters,the first ...
Date Added: 12/29/2025 by Geeetech Staff
Geeetech M1 Mini 3D Printer
Hi Jesse,
Hope you are doing well.
Please check your mailbox for a solution.via eamil If you...
Date Added: 12/29/2025 by Geeetech Staff
10pcs 100Kohm NTC Thermistors for heated bed
Hi PIERPAOLO,
We are arranging the shipment of the A20M hotend thermistors and will update the t...
Date Added: 12/29/2025 by Geeetech Staff
Geeetech M1 Mini 3D Printer
Hello_br_I was wondering what the filament name is for the one that comes with the printer?
Date Added: 12/27/2025 by Nathan Lim
PLA Luminous Yellow 3D Printer Filament 1.75mm 1kg/roll
Hi,_br_do you have the configuration of this pla for BambuLab P2S?_br_
Date Added: 12/26/2025 by György Hencz
Geeetech M1 Mini 3D Printer
How do I get the information that was on the micro SD if I need to reformat it ? Can I download it f...
Date Added: 12/26/2025 by Jesse Garvin
10pcs 100Kohm NTC Thermistors for heated bed
Vorrei il sensore temperatura estrusore a20m
Date Added: 12/25/2025 by PIERPAOLO MELFI
Geeetech M1 Mini 3D Printer
Hi Jessica,
Hope you are doing well.
The solution for the reformatted issues was sent to you...
Date Added: 12/25/2025 by Geeetech Staff
Geeetech M1 Mini 3D Printer
My daughter‘s SD card had to be reformatted for her mini printer. Is there a way to get those files ...
Date Added: 12/24/2025 by Jessica Jones
TPU Green 3D Printer Filament 1.75mm 1kg/roll
Hi Florian,
Hope you are doing well.
Our TPU hardness grade is 95A,if you have any problems,...
Date Added: 12/10/2025 by Geeetech Staff
TPU Green 3D Printer Filament 1.75mm 1kg/roll
Härte Angabe?
Date Added: 12/09/2025 by Florian Wick / 2506777
{10KG} PETG Black 3D Printer Filament 1.75mm 1kg/roll
Hi Marcel,
Hope you are doing well.
The 10kg PETG Black will arrive at the EU warehouse on t...
Date Added: 12/05/2025 by Geeetech Staff
{10KG} PETG Black 3D Printer Filament 1.75mm 1kg/roll
Hi, when will the 10KG PETG black be available again in the European warehouse?
Date Added: 12/05/2025 by Marcel van 't Hof
Geeetech M1 Mini 3D Printer
Hi Holger,
Hope you are doing well.
Appreciate your support for our M1 printer, and it is es...
Date Added: 12/02/2025 by Geeetech Staff
Geeetech M1 Mini 3D Printer
Dear Geeetech team_br_Do you know by when the M1 Mini will be restocked in your EU warehouse?_br_I d...
Date Added: 12/01/2025 by Holger Keibel
Geeetech M1 Mini 3D Printer
Hi Javier,
Hope you are doing well.
The M1 SD card files have been sent to you via email. Plea...
Date Added: 11/29/2025 by Geeetech Staff
Geeetech M1 Mini 3D Printer
My SD card failed and I had to format it. I need the contents of the card. How can I download or ret...
Date Added: 11/29/2025 by Javier Ciller
TPU Black 3D Printer Filament 1.75mm 1kg/roll
Hi David,
Hope you are doing well.
Our TPU black Shore hardness is 95A. Here is my email add...
Date Added: 11/28/2025 by Geeetech Staff
TPU Black 3D Printer Filament 1.75mm 1kg/roll
What shore is it ?????
Date Added: 11/28/2025 by David Petit
Geeetech M1 Mini 3D Printer
Hi Jhonatan,
Appreciate your support. We don't have overseas warehouse location in Colombia, so ...
Date Added: 11/26/2025 by Geeetech Staff
Geeetech M1 Mini 3D Printer
Why delivery to colombia Is too expensive? Can we see another options like AliExpress that shipping ...
Date Added: 11/23/2025 by Jhonatan Betancur arias
5pcs * Nozzle for Thunder 3D Printer
Hallo, die Lieferung eines kleinen Pakets von unserem Lager in China nach Österreich dauert etwa 10-...
Date Added: 11/22/2025 by Geeetech Staff
ASA Black 3D Printer Filament 1.75mm 1kg/roll
Hi Larry,
Hope you are doing well. We have a warehouse in the US. When the stock is sufficient, ...
Date Added: 11/21/2025 by Geeetech Staff
5pcs * Nozzle for Thunder 3D Printer
wie lange dauert die lieferung von den 5 düsen? nach österreich AT von china mit expressversand?
Date Added: 11/21/2025 by Tamara Hörtnagl
ASA Black 3D Printer Filament 1.75mm 1kg/roll
The site says its shipping from LA in the US to Minnesota in the US, but I'm being charged for overs...
Date Added: 11/20/2025 by Larry Chladek
Geeetech M1 Mini 3D Printer
Hello,
Thank you for your consultation and liking of our M1 printer. Our M1 printer upgrade vers...
Date Added: 11/20/2025 by Geeetech Staff
Geeetech M1 Mini 3D Printer
Question: Why is it out of stock in the US? It's been like this for at least 1 to 2 weeks.
Date Added: 11/19/2025 by Gamerwiththegames87 Unknown
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi Paul,
This 3D Touch can be used with your printer.3D Touch V3.2 can be widely used in various...
Date Added: 11/16/2025 by Geeetech Staff
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi, will this work on an Ender 5, original board v1.1.4?
Date Added: 11/14/2025 by Paul Varga
PLA Black 3D Printer Filament 1.75mm 1kg/roll
Hi Dennis,
Hope you are doing well.
Appreciate your support and liking of PLA Black filament...
Date Added: 11/12/2025 by Geeetech Staff
PLA Black 3D Printer Filament 1.75mm 1kg/roll
Great filament
Date Added: 11/12/2025 by dennis smolders
{10KG} PETG Yellow 3D Printer Filament 1.75mm 1kg/roll
Hi Joe,
Thank you for your inquery,the 10 rolls of PETG yellow filaments will arrive at the EU w...
Date Added: 11/05/2025 by Geeetech Staff
Fan extention wire M/M 1200mm
Hi Eric,
Hi Eric,
Thank you for your order,our logistics colleague are arranging shipment an...
Date Added: 11/05/2025 by Geeetech Staff
{10KG} PETG Yellow 3D Printer Filament 1.75mm 1kg/roll
Do you have an update for the arrival of yellow PETG in GB_br_thank you
Date Added: 11/05/2025 by Joe Hamilton
{10KG} PETG Black 3D Printer Filament 1.75mm 1kg/roll
Hi Sebastjan,
Thank you for your consultation. I have updated the inventory info, and the 10kg PE...
Date Added: 11/04/2025 by Geeetech Staff
{10KG} PETG Black 3D Printer Filament 1.75mm 1kg/roll
Hi, when will the 10kg PETG be available again in the European warehouse?
Date Added: 11/03/2025 by Sebastjan Kambič
Fan extention wire M/M 1200mm
I have the I 3 pro b is Fan extention wire M/M 1200mm the right to cord I already ordered my fan nee...
Date Added: 11/02/2025 by Eric Watkins
TPU White 3D Printer Filament 1.75mm 1kg/roll
Hi Rinus,
Thank you for your consultation. Our TPU has a Shore hardness of 95A.
Welcome to or...
Date Added: 10/29/2025 by Geeetech Staff
{10KG} PETG Grey 3D Printer Filament 1.75mm 1kg/roll
Hi Marcel,
Thank you for leaving the message for the new shipping address. We will ship the orde...
Date Added: 10/29/2025 by Geeetech Staff
PETG Grey 3D Printer Filament 1.75mm 1kg/roll
Hi Rinus,
You can select the Generic filaments printing setting in the BambuLab slice software. Y...
Date Added: 10/29/2025 by Geeetech Staff
{10KG} PETG Grey 3D Printer Filament 1.75mm 1kg/roll
!!!ACHTUNG!!!_br__br_Bitte an folgende Adresse Senden:_br__br_Paul Romich_br_Wilhelm Bergner Straße ...
Date Added: 10/29/2025 by Marcel Kreilaus
TPU White 3D Printer Filament 1.75mm 1kg/roll
Hi TPU is a specific type of TPE and is on the more rigid than other flexible filaments, making it e...
Date Added: 10/27/2025 by Rinus Joosen
PETG Grey 3D Printer Filament 1.75mm 1kg/roll
When I use PETG filament on my BambuLab p1S printer, what speed can I achieve with this filament? I ...
Date Added: 10/27/2025 by Rinus Joosen
5pcs * Nozzle for Geeetech M1 3D Printer
Hi Ezekiel,
We have not yet sold the other size M1 nozzle at present. We suggest that you purcha...
Date Added: 10/24/2025 by Geeetech Staff
Geeetech 3D Touch V3.2 Auto Leveling Sensor
Hi Roman,
The 3d touch leveling sensor is suitable for your Thunder printer. Welcome to order it...
Date Added: 10/24/2025 by Geeetech Staff
Geeetech 3D Touch V3.2 Auto Leveling Sensor
hi, can i use this with Geeetech Thunder?
Date Added: 10/22/2025 by Roman Forster
{10KG} PETG Yellow 3D Printer Filament 1.75mm 1kg/roll
Hi Vince,
Thank you for your consultation for the inventory and arrival info of 10 rolls of PETG ...
Date Added: 10/22/2025 by Geeetech Staff
{10KG} PETG Yellow 3D Printer Filament 1.75mm 1kg/roll
When will this be back in stock in GB
Date Added: 10/21/2025 by Vince Henshall
Skin ABS-Like Resin 1KG, High Compatible for Most LCD and DLP 3D Printer
Hi Maialen,
The bottom layers setting is monochrome LCD(5),RGB CD(5).
Normal exposure time：
...
Date Added: 10/16/2025 by Geeetech Staff
{4KG} PLA Silk Tri-Color 3D Printer Filament 1.75mm 1kg/roll (Red+Yellow+Blue)+(Red+Gold+Black)
Hi stephen,
You can slow down the printing speed to achieve a better silk gloss effect. The prin...
Date Added: 10/16/2025 by Geeetech Staff
3D Printer Brass M6 nozzle for MK8 extruder/0.3mm
Hi Patrick,
The part is suitable for MK8 extruder, you can purchase this product link:https://ww...
Date Added: 10/16/2025 by Geeetech Staff
5pcs * Nozzle for Geeetech M1 3D Printer
Is there any other nozzle sizes besides 0.4mm for the m1?
Date Added: 10/16/2025 by Ezekiel Caldwell
Skin ABS-Like Resin 1KG, High Compatible for Most LCD and DLP 3D Printer
What is the correct layer configuration for this resin?
Date Added: 10/16/2025 by Maialen Sanchez Andres
{4KG} PLA Silk Tri-Color 3D Printer Filament 1.75mm 1kg/roll (Red+Yellow+Blue)+(Red+Gold+Black)
I got the Red/Black/Gold and Red/Blue/Yellow tricolor silk filaments and I'm very happy with them. T...
Date Added: 10/14/2025 by Stephen Rodway
3D Printer Brass M6 nozzle for MK8 extruder/0.3mm
Hi can i use these on my a30t
Date Added: 10/14/2025 by Patrick Wendels
3D Printer Brass M6 nozzle for MK8 extruder/0.3mm
Hi Ezekiel,
This nozzle part is not compatible with Geeetech M1,this is the M1 printer nozzle pr...
Date Added: 10/13/2025 by Geeetech Staff
Alkaid LCD Printer FEP Sheet * 5 pcs
Hi Herve,
If you need to purchase this product from our EU warehouse, we recommend purchasing th...
Date Added: 10/13/2025 by Geeetech Staff
Displaying 1 to 100 (of 2124 reviews)
TOP