X
This is a wood based filament that can be used in most desktop 3D printers, such as our Geeetech I3 pro B. The wood filament prints easily and smoothly, similar to PLA, and give off a smell of wood when printing. The printed objects look very much like a wood carving work, which will appear rough and similar to MDF, Medium Density Fiberboard but it can be easily sanded.
Because 3D wood filament has real wood fibers, the print temperature can be adjusted during the print to produce differing shades of color. If the print temperature is adjusted by as little as 10 degrees mid-print, the resulting color will have a "grainy" look. Printing at lower temperatures will produce a brighter color; versus a print at higher temps will create a darker print. Possible extrusion temperature is better to be with a good starting point at 190 degrees. Hotter temperatures will extrude a darker filament; using variable temperatures during a print.
Suggested setting:
Layer height: 0.25 mm
Default extrusion with: 60~ 80 mm
Speed for non-moves: 40~60 mm
Temperature of extruder: 190℃~230℃
TOP
this absolutely the worst filament I have ever used even with the nozzle temp set at 170 when ever it transitions it just keeps dribbling out of the nozzle with 2mm retraction enabled it cannot print supports as it just keeps dribbling
Dear customer , Thank you for your feedback, I will timely feedback the filament printing problem to the quality department, and I will strive to ensure the good performance of the filament printing. You can contact my email myorder@geeetech.com ,I can reissue a roll of supplies for you ,hope you have a good day .