X
About this item
【Dimensional Accuracy & Consistency】GEETECH PLA has strict tolerances. Diameter 1.75mm, dimensional accuracy +/- 0.03mm without any exaggeration.
It works and harmoni zes perfectly with all common 1.75mm FDM 3D printers.
【1kg (2.2lbs) Spool】Pack of 1 1kg/(2.2lbs) Yellow Color pla. Spool size: Φ200mm/7.9" flange, Φ56mm/2.2" hub hole, 64mm/2.5" width.
Reel is suitable for most trendy printers, Comgrow, Geeetech, Longer, LABISTS, ANYCUBIC.etc
【Easy-to-Use, Clog-Free, Bubble-Free】Recommended extrusion nozzle temperature 185°C - 215°C, hot bed 25°C - 60°C.
Works perfectly with all common 1.75mm FDM 3D printers.
【Vacuum Packing】Vacuum sealed with desiccant to maintain low level of moisture content.
And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.
Note: an extra sealed bag is offered to store filament.
Specs:
Net weight: 1 kg
Color: PLA brown
Filament sizes: 1.75mm
Material: Polylactic Acid
TOP
Ordered brown for the first time. Becomes much lighter when printing, otherwise no problems as always!
Thank you for your support to geeetech, welcome to buy again!
is there any way to get the RGB codes for the filament colors? trying to achieve the color code while configuring the Geeetech Color Mixer without any color information besides the name (brown, green, blue, etc...) ends up being a bit misleading on the final achievement for the printed object. thanks
Sorry, Joao, the filament don't have RGB codes