X
【Dimensional Accuracy & Consistency】 GEETECH PLA has strict tolerances. Diameter 1.75mm, dimensional accuracy +/- 0.03mm
without any exaggeration. It works and harmoni zes perfectly with all common 1.75mm FDM 3D printers.
【1kg (2.2lbs) Spool】Pack of 1 1kg/(2.2lbs) Yellow Color pla. Spool size: Φ200mm/7.9" flange, Φ56mm/2.2" hub hole, 64mm/2.5" width.
Reel is suitable for most trendy printers, Comgrow, Geeetech, Longer, LABISTS, ANYCUBIC.etc
【Easy-to-Use, Clog-Free, Bubble-Free】
Recommended extrusion nozzle temperature 185°C - 215°C, hot bed 25°C - 60°C.
Works perfectly with all common 1.75mm FDM 3D printers.
【Vacuum Packing】– Vacuum sealed with desiccant to maintain low level of moisture content.
And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.
Note: an extra sealed bag is offered to store filament.
Specs:
Net weight: 1 kg
Color: PLA like marble color
Filament sizes: 1.75mm
Material: Polylactic Acid 
TOP
I really enjoyed using this Like Marble filament, it's performed very well in my Voron printer. It feeds easily and prints well even at quite low temperatures (185C worked well for me) it has a low-friction surface that passes easily though the feed tube but is also quite strong lengthwise so it doesn't need much pressure advance or retraction to get it to behave nicely. The bed adhesion is excellent on PEI at 55C and the layer adhesion seems to be very good too. It's got a rather hard surface when printed which makes it easy to clean up with files or sandpaper and takes a flame-polish quite well, although that rigidity does mean that there's not a lot of flex in printed parts so you should be careful with designs that need that for assembly. The surface detail reproduction is excellent and it has almost zero blobbing or stringing when used with the proper settings. _br__br_The marble-like surface has quite a good effect, it's a sort of off-white color with brown flecks in it. Looked at up close it's not all that much like marble but when seen from a distance the effect is a lot more convincing, it's excellent for architectural models where it's used to look like marble facades. When printed below 60mm/sec the surface is nicely glossy and it can also be flame polished to enhance the shine._br__br_I'm very happy with this filament and will be using it for many of my prints in future, especially when fine surface detail matters or when a little extra rigidity is useful.
Hi Stephen, Thank you for your support and for your good review of our like marble brown. Have a nice day.