TG-17 is a high-end 3D printing pen that supports 3 kinds of filaments: ABS, PLA, and PCL. It covers commonly used 1.75mm filaments which supports high, middle and low temperature. And has a wider range of filament support;
The product uses LCD screen to display printing information, allowing you to get the current working status of the printing pen more intuitively;
The product supports real-time adjustment of printing speed and printing temperature, and printing will not be interrupted during the adjustment process, which brings you a smoother user experience;
This product adopts a replaceable pen tip design, and the printing pen can be disassembled and replaced without tools.
The product system adopts a safe design. If it is not used for 1 minute or continuously extrude for 8 minutes during use, the printing pen will automatically go to sleep mode.
lSupports ABS,PLA, PLC: TG-17 has 3 modes for supporting ABC,PLA,PCL 3 different temperature-supported filament, allow you to choose freely
l 5 gears of speed for real-time adjustment: TG-17 has 5 gears of speed for adjustment. Users can adjust the extrusion speed of filament according to his needs during use. What’s more, compared to other products, TG-17 can continue printing process while adjusting speed, bringing users smooth and joyful printing experience.
lAdjustable printing temperature: in ABS, PLA, PLC 3 modes, the printing temperature can all be adjusted. If you find that the filament is difficult to extrude, filament too thin or bubbling, you can solve it by adjusting printing temperature.
l Smart sleep mode: for your safety and protection of the 3D printing pen, when the printing pen does not start printing within one minute after preheating or continuously extrude for 8 minutes, the printing pen will stop heating and stop printing, it automatically go to sleep mode. If you want to use it again, press the extrusion button;
lDetachable pen tip:for the convenience of cleaning and maintenance, the ceramic nozzle of the printing pen adopts a detachable design. When the pen tip needs to be cleaned or damaged, only needs to remove the pen tip to clean or repair;
lExternal power supply: TG-17 adopts an external 5V power supply. Compared with the built-in battery-type 3D printing pen, there is no need to worry about the power life of the printing pen;
100-240V AC, 50/60Hz
2. Mechanical Parameter
Fully-enclosed machine size
Hi, can I use this pen with your regular ABS filament (temperature range 230-240) as you do not have any ABS filament for 3D Pen. The temperature of 210 Celsius should not be enough, but I'm new to 3D printing and maybe I'm missing something
Yes, it is not suitable for ABS.
Thank you for your support of geeetech.