GEEETECH PLA Mramorové filament pro 3D tiskárny 1,75 mm, 1 kg cívka
GEEETECH PLA Mramorové filament pro 3D tiskárny 1,75 mm, 1 kg cívka - Mramorové Hnědá is backordered and will ship as soon as it is back in stock.
Delivery a Shipping
Delivery a Shipping
Add some general information about your delivery a shipping policies.
GEEETECH PLA Mramorové filament pro 3D tiskárny 1,75 mm, 1 kg cívka
GEEETECH PLA Mramorové filament pro 3D tiskárny 1,75 mm, 1 kg cívka - Mramorové Hnědá is backordered and will ship as soon as it is back in stock.
Description
Description
About this item
【Dimensional Accuracy & Consistency】 GEETECH PLA has strict tolerances. Diameter 1.75mm, dimensional accuracy +/- 0.03mm without any exaggeration. It works and harmoni zes perfectly with all common 1.75mm FDM 3D printers.
【1kg (2.2lbs) Spool】Pack of 1 1kg/(2.2lbs) Yellow Color pla. Spool size: Φ200mm/7.9" flange, Φ56mm/2.2" hub hole, 64mm/2.5" width.
Reel is suitable for most trendy printers, Comgrow, Geeetech, Longer, LABISTS, ANYCUBIC.etc
【Easy-to-Use, Clog-Free, Bubble-Free】
Recommended extrusion nozzle temperature 185°C - 215°C, hot bed 25°C - 60°C.
Works perfectly with all common 1.75mm FDM 3D printers.
【Vacuum Packing】– Vacuum sealed with desiccant to maintain low level of moisture content.
And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.
Note: an extra sealed bag is offered to store filament.
Specs:
Net weight: 1 kg
Filament sizes: 1.75mm
Material: Polylactic Acid 
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access do your credit card information.
The marble texture effect is absolutely gorgeous! I've only used Geeetech PLA filaments before, and the experience has always been excellent. I'd also seen pictures of this marble texture filament on various forums, so I wanted to try it out. I quickly loaded it into my printer (BambuLab P1S, with an AMS printhead) and printed a Benchy model. I used the default settings (universal PLA print profile), and everything was fine. Because it comes in a plastic spool package, the AMS printhead didn't have any issues. The adhesion to the substrate at 50°C was perfect, no need for a bottom edge. Due to the high printing speed of 200mm/s, the hot end temperature was slightly higher than usual, reaching 220°C, but this was simply due to the high speed. The flow rate was 0.98 at a layer height of 0.2mm. There was absolutely no stringing, and the drape was handled very well. This is a fantastic filament, extremely easy to use, and very reasonably priced. Five stars, well-deserved.
Hi Besse, thank you for your good review of the marble filaments. The model was printed perfectly.
Nice look
