PLA Like Marble Brown 3D Printer Filament 1.75mm 1kg/roll

I really enjoyed using this Like Marble filament, it's performed very well in my Voron printer. It feeds easily and prints well even at quite low temperatures (185C worked well for me) it has a low-friction surface that passes easily though the feed tube but is also quite strong lengthwise so it doesn't need much pressure advance or retraction to get it to behave nicely. The bed adhesion is excellent on PEI at 55C and the layer adhesion seems to be very good too. It's got a rather hard surface when printed which makes it easy to clean up with files or sandpaper and takes a flame-polish quite well, although that rigidity does mean that there's not a lot of flex in printed parts so you should be careful with designs that need that for assembly. The surface detail reproduction is excellent and it has almost zero blobbing or stringing when used with the proper settings. _br__br_The marble-like surface has quite a good effect, it's a sort of off-white color with brown flecks in it. Looked at up close it's not all that much like marble but when seen from a distance the effect is a lot more convincing, it's excellent for architectural models where it's used to look like marble facades. When printed below 60mm/sec the surface is nicely glossy and it can also be flame polished to enhance the shine._br__br_I'm very happy with this filament and will be using it for many of my prints in future, especially when fine surface detail matters or when a little extra rigidity is useful.