How to Slice for Geeetech M1 or M1S 3D Printing
The article provides a tutorial on 3D slicing for Geeetech M1 and M1S users, including how to use Orca Slicer and Bambu Studio, and remote operation of the M1S.
Guide
How to Slice for Geeetech M1 or M1S 3D Printing
-
What Is Retraction in 3D PrintingWhat Is Retraction in 3D Printing
Retraction pulls filament back to stop stringing and oozing during travel moves.
-
-
Slicing Introduction: What Is Slicing in 3D Printing?Slicing Introduction: What Is Slicing in 3D Printing?
3D slicing is "translating" the 3D model into a series of instruction files that the printer can understand and execute.
-
10 Best Free STL Files/3D Print Models Sites You Will Need10 Best Free STL Files/3D Print Models Sites You Will Need
This article lists 10 indispensable free STL file websites for you, which will directly load unlimited possibilities into your build board.
-
-
Ultimate Guide to 3D Printing SupportsUltimate Guide to 3D Printing Supports
Understanding when to use supports in 3D printing, what they do, and how they actually work.
-
3D Printing Post Processing Guide: PETG VS PLA3D Printing Post Processing Guide: PETG VS PLA
Post-processing is any work done after the print is finished, where people enhance the overall look or feel.
-
What Is a Brim in 3D Printing and When to Use It?What Is a Brim in 3D Printing and When to Use It?
A brim is not a support structure in the traditional sense, but rather a build plate adhesion aid.
-
First 3D Model: Tips for Beginner 3D ModelersFirst 3D Model: Tips for Beginner 3D Modelers
To get excellent results in 3D modeling you must have the passion. Therefore, everything related to computers, understanding of, and the way objects are placed in space and be an...
-
3D Prints Design: Chamfer vs. Fillet3D Prints Design: Chamfer vs. Fillet
This guide describes the main distinctions between fillets and chamfers in 3D printing, and their effects on printability, strength, and beauty.
-
What Is Vase Mode in 3D PrintingWhat Is Vase Mode in 3D Printing
Vase mode is a method of 3D printing that is meant to print hollow and thin-walled objects with a smooth exterior finish.
-
3MF VS STL: Understanding Their Differences3MF VS STL: Understanding Their Differences
STL still dominates due to its long-standing adoption and compatibility, but the 3D printing industry is gradually transitioning to the more advanced 3MF format.
