X
ean 06974994171791
About this item
【Glow in the Dark】This filament contains phosphorescent materials that glows in the dark after absorbing light energy.
Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may
damage the glow filament.
【High Compatibility】This filament are universally designed and compatible with 3D Printers using 1.75mm diameter filament,
with a dimensional accuracy of +/- 0.03mm.
【High Quality】This filament Anti-warping, high accuracy, no bubble, no jamming and no drawing.Recommended printing temp 190-230°C (374-446°F), hot bed temp 50-70°C (122-158℉).
【Vacuum Sealed Package】GEEETECH 3d filament is carefully vacuum packaged with desiccant to maintain low level of moisture content. And keep it dry and keep out dust and foreign particles, prevent nozzle jams.
Specs:
Net weight: 1 kg
Color: PLA Glow in the Dark Green
Filament sizes: 1.75mm
Material: Polylactic Acid
TOP
Any suggestions/parameters for using Geeetech Glow Green filament on my Elegoo Neptune 4 Pro printer? I get great prints using standard silk filaments but when I try to run the Glow Green my prints always fail - poor plate adhesion, stringing, poor layer adhesion. I use the same Cura slicing parameters as with the silk and even slow the print speed down. Print temperatures are 210c and plate temperature is 65c. Any help would be appreciated.
Hi ken, The first layer of luminous filaments does require a relatively high adhesion to the platform. You can first perform automatic leveling to accurately adjust the distance between the nozzle and the hot bed. At the same time, reduce the first layer printing speed by half and add a skirt to the model.
Shines really great. The fastest is the effect with UV lamps. The filament was often used especially during Halloween!
Thank you for your comments and suggestions!