Introduction of carbon fiber filament 3D Printing Carbon Fiber Filaments are commonly classified as PLA, ABS, PETG, Nylon based, etc. This filament cannot be 100% carbon, it needs to be mixed with a polymer base to make it more flexible, similar to metal-infused filaments it is one kind of composite material made by infusing fragments. The…
The prerequisite for printing good works is based on the adjustment of the printing equipment, the debugging of the model slices, the temperature setting of the printing consumables, and their quality. The solution to the printing wire drawing problem is: 1. Lower the nozzle temperature; 2. Set the retraction length. Here are some solutions to practical problems for…
On October 28th CST, Geeetech released a new generation mixing color 3D printer, Mizar M. Compared to Geeetech’s previous multi-color 3D printers, Mizar M is equipped with two print head modules – “Separated Color Module” and “Gradient Color Module”, corresponding to the two printing modes of “Separate Mode” and “Gradient Mode” respectively, allowing 3D printer enthusiasts to enjoy multi-color printing. At present,…
It is well-known that many consumer FDM 3D printers are printing quite slowly. Even with a simple model, it may take hours to finish. However, in the year of 2022, things are different. High-speed 3D printer is going to market. By September 13th, Geeetech is launching a new high-speed 3D printer named THUNDER on Kickstarter…
Various technologies, as we say, have been packed into every piece of our daily lives while greatly promoting the way we live, the way we think, and even the way how we act. By and large, as technology keeps its influence on us offering us a pack of benefits, we as human beings of the…
As for almost every 3D printing lover, the occasional emergence of minor flaws sometimes can be found after the resuming printing process of FDM 3D printers, but in most actual situations, machines aren’t the culprits messing up everything. The re-dissolving of filament should bear the responsibility while it causes the supply shortage in printing. How…
Besides the color merging with separate modular of different colors, the updated version of our Easy Print Lite also allows you to print your models with gradient color which requires only some simple steps. Let’s dive in and see where it will bring us. Setting Procedures 1. Select Your Machine Get access to the software…
As we all know, slicing software is definitely a must-have for every FDM 3D printer lover. We’ve got various software now surging in such a marketplace for assisting users in slicing models, like Cura, Simplify3D, Repetier-Host, Slic3r, and EasyPrint. The slicing software, also named as slicer, converts the 3D model into a G-CODE file that…