Blue tape

Post Reply
eprom
Posts: 6
Joined: Tue May 29, 2018 11:14 pm

Blue tape

Post by eprom » Mon Jun 04, 2018 8:11 pm

Hello!
Where can I buy more correct blue tape for my E180??
Can I print without it??? Is it secure??
Can you recommend me some blue tape of any online store? I can not find in the Geeetech store.
Would this be worth?
https://www.amazon.es/gp/product/B015FQ ... XLDJ&psc=1

Thanks.

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: Blue tape

Post by Gingko » Tue Jun 05, 2018 2:35 pm

Hi,
E180 has no hotbed, so it better works with blue tape, otherwise, the object cannot stick on the bed.
viewtopic.php?f=64&t=61120
You can search it over different shops, compare with reviews ;)

eprom
Posts: 6
Joined: Tue May 29, 2018 11:14 pm

Re: Blue tape

Post by eprom » Tue Jun 05, 2018 4:10 pm

Ok. I'll search it.

Thank you!

eprom
Posts: 6
Joined: Tue May 29, 2018 11:14 pm

Re: Blue tape

Post by eprom » Wed Jun 06, 2018 3:40 pm

Maybe a crystal would work well for the bed?

:?:

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: Blue tape

Post by Gingko » Thu Jun 07, 2018 6:07 pm

I think it has no much sense. The point is to increase the friction :D

eprom
Posts: 6
Joined: Tue May 29, 2018 11:14 pm

Re: Blue tape

Post by eprom » Mon Jun 11, 2018 3:54 am

Yes, but with crystal with with lacquer

kavita
Posts: 7
Joined: Tue Mar 01, 2022 6:40 pm
Location: usa
Contact:

Re: Blue tape

Post by kavita » Sat Mar 26, 2022 12:56 pm

Yes. I got it..nulls clash

Jon_Milla
Posts: 1
Joined: Mon May 30, 2022 3:40 pm

Re: Blue tape

Post by Jon_Milla » Mon May 30, 2022 4:12 pm

Tape is ideal for protecting the 3D printer's print platform. The prints hold up well and the first layers hold up well. I've tried other, more expensive brands and the result is inferior to what I get with this tape. 100% recommended.

User avatar
xuazzi
Posts: 11
Joined: Thu Jul 14, 2022 8:02 pm

Re: Blue tape

Post by xuazzi » Thu Jul 14, 2022 8:16 pm

I can do manual control board but that's gonna by last way About AutoPid I allredy known its not gonna work.

Post Reply