problems of 3D printer Delta Rostock mini G2s

Post Reply
asal arbatani
Posts: 1
Joined: Thu Aug 17, 2017 8:34 pm

problems of 3D printer Delta Rostock mini G2s

Post by asal arbatani » Thu Aug 17, 2017 8:39 pm

Hello. I'm asal arbatani. I live in Iran and have a 3D printer Delta Rostock mini G2s have not been assembled. We assembled it and connected it with a computer using the repetier program. But we encountered problems.
Firstly, the micro switch does not command the nozzle to not to hit the plate. Where to put the micro switch cable to work properly? Second, we insert the SD card into the device. The printer knows the SD card but can not execute files inside the SD card. How can we fix this problem?
please answer my questions as soon as possible.thanks.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: problems of 3D printer Delta Rostock mini G2s

Post by William » Mon Aug 21, 2017 11:54 am

1.Double check the connections of the end stop.
2.The SD just can detect the G-code file.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply