Can anyone clue me in to bow to alter the return rate on the x and y axis on my i3 pro b.
When I home the axis they hit the end stop but buzz for a few seconds and the printer vibrates loudly.
Am I on the right path or can anyone help me.out
Stepper buzzing homing
Re: Stepper buzzing homing
I think you should check the wiring of Endstop at first
- ENDSTOP-接法.png (627.62 KiB) Viewed 4978 times
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Stepper buzzing homing
The endstop wiring is fine. If I change it it reverses the logic of the gate and the axis won't home at all
I've read that I can lower the return speed in the firm ware but I don't k ow where in the g code I can do that.
Any advice would be great
I've read that I can lower the return speed in the firm ware but I don't k ow where in the g code I can do that.
Any advice would be great