Dual Axis Z

pepgra
Posts: 11
Joined: Thu Dec 20, 2018 6:51 am

Dual Axis Z

Post by pepgra » Mon Jan 21, 2019 10:13 pm

Someone has installed a double Z axis, I want to make this improvement...

Lexan
Posts: 71
Joined: Fri Oct 26, 2018 8:28 pm

Re: Dual Axis Z

Post by Lexan » Wed Jan 23, 2019 11:44 am

why ?

davesatu
Posts: 13
Joined: Sat Oct 06, 2018 12:16 pm

Re: Dual Axis Z

Post by davesatu » Mon Feb 11, 2019 11:58 am

is it an improvement?
Be very careful before changing anything as obviously the maker has worked out most stuff.

pepgra
Posts: 11
Joined: Thu Dec 20, 2018 6:51 am

Re: Dual Axis Z

Post by pepgra » Wed Feb 13, 2019 2:47 am

There is too much drop of the axis, although eccentric adjustments the problem is not solved, I am thinking of a modification to put another z, there are easier kit for other printers, but they do not fit in this design, you have to create one.

User avatar
William
Site Admin
Posts: 5130
Joined: Tue Jun 07, 2016 9:38 am

Re: Dual Axis Z

Post by William » Mon Feb 18, 2019 3:14 pm

You can feedback it to :
technical@geeetech.com
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
YvonGeee
Posts: 19
Joined: Thu Oct 03, 2019 7:20 pm
Location: Bretagne, France

Re: Dual Axis Z

Post by YvonGeee » Fri Jan 03, 2020 3:58 pm

Hello,

Anyone did the mod?

Thanks!!

Jarda3d
Posts: 184
Joined: Sat Jan 26, 2019 8:42 am

Re: Dual Axis Z

Post by Jarda3d » Sat Jan 04, 2020 10:48 pm

You did not need it if your printer is tighted and aligned.
A10M Slic3r profile: here and fresh on github (lot of tips here)
A10 Slic3r profile: here
TIP: tight all screws and wheels (except right side of Z axis) and re-align frame while assembly. And silence it.

redangel1984
Posts: 3
Joined: Sat Dec 30, 2017 11:52 am

Re: Dual Axis Z

Post by redangel1984 » Thu Jan 16, 2020 9:55 pm

Yes I did the upgrade for all my A printers.

User avatar
YvonGeee
Posts: 19
Joined: Thu Oct 03, 2019 7:20 pm
Location: Bretagne, France

Re: Dual Axis Z

Post by YvonGeee » Thu Jan 16, 2020 10:05 pm

@redangel1984

Hello,

Any pictures, hints, how to?

thanks!!

redangel1984
Posts: 3
Joined: Sat Dec 30, 2017 11:52 am

Re: Dual Axis Z

Post by redangel1984 » Thu Jan 16, 2020 11:51 pm

https://www.thingiverse.com/thing:4049225

If you have any questions feel free to PM me on Facebook: Akos Wonerth

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests