Geeetech

Cool Hope it comes out a little better the main thing I have is like blobs/pimples the higher I print I have to work out how to fix it. I use this Vase creator to test height of the printer, to see when it goes wrong http://www.huginen.nu/vazy/ on a tall vase I normally get about 200mm High, before ...

Here is my Cura 4 Profile print a calibration cube with it see how it comes out, Just out of curiosity if you can post a pic after. Had to zip it up as I could not attach the profile as it was. Geeetech A30 Sa1Wales.zip It is a 0.3 Low Quality Profile if you want higher Quality just change the 0.3 l...

Hi! Great info, thanks :D May I ask if the A30 worked out of the box for you? Me and some others have a lot of issues printing with the A30, like here: http://www.geeetech.com/forum/viewtopic.php?f=65&t=62087 Since it appears you have a lot better printing results ... what magic did you do? :) Kind...

William wrote: ↑

Sat May 25, 2019 9:25 am

Hi，I hope this can help you:https://www.youtube.com/watch?v=_RtsZDbR2po&t=66s

Looks like he has the Older version of the Hotend as he has'nt got the extruder Expansion board in his pics that is on the new A10 and A30, the youtube video takes him to the Newer Versions.

Steve.

First 2 cubes Are my settings, as you can see the Standard and the Super Quality are a lot better on the right side. The Blob on the Standard and Fine are where the Printer finished the print, for some reason after its finished it does not seem to activate the End G-Code.

Its printing really good though I think there is incompatible End Gcode as the print stops when the print is finished and just sits at where it stops I have done 2 Cubes at the moment 1 super Quality and 1 at standard. Ill post the end Gcode here see if anyone knows why it just stops and dont execut...

I thought I would try this out on the A30 using the Creatality A10S Pro Profile and just changed the bed and hieght settings to reflect the A30 Buid Volume. Everything looks fine using the modded Cura and the CR10S Pro Profile, I havent changed any of the settings in Cura just what the mod provides ...

I would also like info on this, I cant believe you havent had a reply yet as it states in the build instructions to post in the forum if you have issues or facebook. Not everyone uses Facebook.

Hope there is a good reply from Geeetech soon,

Steve.

It will print off center as the actual print bed is 330x330 Just thought I would mention it, As I had the same problem with My Geeetech A10 the print bed size is 235x235. on the A10 I just changed it in Cura, But on The A30 I Think its built into the firmware when you check information it has 320x32...

Hi Steve, it appears i have the axis letters mixed up but the cables are not in the wrong place. It is the Z axis i am having trouble with. one of the motors arent working. however when i swap the cable from the other Z axis. it works.. but the one that was working isnt working.. so they just liter...