Search found 486 matches
- Tue Aug 10, 2021 9:52 am
- Forum: Geeetech A30 Series
- Topic: $700 A30T died after 2 months
- Replies: 10
- Views: 8644
Re: $700 A30T died after 2 months
Hello, if the hotend gets clogged frequently, increase the temperature when clearing, and then thoroughly clean the hotend and nozzle, and then insert the Teflon tube deeper to avoid clogging.
- Wed Aug 04, 2021 11:26 am
- Forum: A30M
- Topic: Finally fixed
- Replies: 1
- Views: 4591
Re: Finally fixed
Congratulations.
- Wed Aug 04, 2021 11:24 am
- Forum: Geeetech A30 Series
- Topic: What am I supposed to do with this ???
- Replies: 1
- Views: 2550
Re: What am I supposed to do with this ???
Hello, you can first connect to the computer via USB and control the printer through the slicing software to print online.
- Wed Aug 04, 2021 11:23 am
- Forum: Geeetech I3 Pro W
- Topic: no function on extruder
- Replies: 1
- Views: 2555
Re: no function on extruder
Hello, the extruder normally indicates that it is not a motor problem, it may be a motherboard problem. It is recommended that you reinstall the firmware. If you cannot solve it, you can only change the motherboard.
- Wed Aug 04, 2021 10:59 am
- Forum: Geeetech I3 Pro W
- Topic: 3D Touch sensor doesn't respond.
- Replies: 2
- Views: 3482
Re: 3D Touch sensor doesn't respond.
Hello, is the firmware not updated? You can update the firmware first, and then simulate the hot bed with your hands to see if you can make the bed rise normally.
- Wed Aug 04, 2021 10:44 am
- Forum: Geeetech E180 Mini
- Topic: Printer Setting for EasyPrint3D
- Replies: 2
- Views: 9944
Re: Printer Setting for EasyPrint3D
Hello, you can directly use Easyprint Lite Release, which has a matching E180 configuration file.
- Tue Aug 03, 2021 3:17 pm
- Forum: Geeetech A10 Series
- Topic: Need to know Z steps!
- Replies: 1
- Views: 1817
Re: Need to know Z steps!
Hello, Z: 400
E:395
E:395
- Tue Aug 03, 2021 3:15 pm
- Forum: Geeetech A20
- Topic: Need help with levelling my geeetech a20
- Replies: 0
- Views: 2053
Re: Need help with levelling my geeetech a20
Hello, the Z-axis limit switch can be reinstalled. You can install the endstop of the Z-axis upward a little bit.
- Tue Aug 03, 2021 3:14 pm
- Forum: Geeetech A10 Series
- Topic: Geeetech A10 first time problems
- Replies: 1
- Views: 1860
Re: Geeetech A10 first time problems
Hello, did you level the printing platform before printing? You can refer to the following video:
https://www.youtube.com/watch?v=cWze5BCrZSY
https://www.youtube.com/watch?v=cWze5BCrZSY
- Tue Aug 03, 2021 3:05 pm
- Forum: Geeetech A10 Series
- Topic: Sculpture printing with Geeetech A10
- Replies: 1
- Views: 1810
Re: Sculpture printing with Geeetech A10
Hello, the main parameters are temperature and printing speed.
You can refer to the video below.
https://www.youtube.com/watch?v=N9x9de4nYI8&t
You can refer to the video below.
https://www.youtube.com/watch?v=N9x9de4nYI8&t