Geeetech

I was finally able to get it back to the old firmware (E180_M04_V1.bin) These are the steps that I followed: Removed SD card from behind the LCD screen. Reformatted the card. Copied the E180_S01_V1_32.bin, config.txt & the entire system folder from the UI folder. Insert the SD card into the back of ...

I finally figured out that there is an SD card behind the actual LCD screen. I removed it, reformatted to FAT32, copied the following files to it: E180_S01_V2_02.bin config.txt and also the entire system folder that was located in the UI folder. While the (LCD) SD card was out of the printer, I uplo...

maybe you need this:E180-V2.02.02版-去掉密码.rar Motherboard application: E180_M04_V2_02.bin Motherboard boot program: MotherBoot_bootloader_V1.0.bin LCD screen application: E180_S01_V2_02.bin LCD screen boot program: LCD_E180_bootloader_V2.0.hex The SD card needs to be formatted before use, as shown in...

Same here! I upgrade the firmware from this download https://www.geeetech.com/download.html?download_id=41 used file Firmware version V2.02.02 Motherboard application: E180_M04_V2_02.bin LCD screen application: E180_S01_V2_02.bin Suitable for metal nozzles Which applies to my E180 I cannot rollback ...

Does anyone have a Cura profile for the E180? The .rar file posted in the thread above does not unpack. It gives an error every time I try to unpack it and I have tried several different rar opener softwares. TIA