Search found 116 matches
- Sun Oct 09, 2016 11:25 am
- Forum: Others
- Topic: M301 rostok issue
- Replies: 11
- Views: 19197
Re: M301 rostok issue
Could you tell me how the stopping looks like? Did the LCD reset? How about the fan? Does it seem like the whole system reset itself or just the motor stops? If it's just the motor, then I think there maybe something wrong with the motor driver, or there's a poor contact somewhere, you can re plug a...
- Sun Oct 09, 2016 11:00 am
- Forum: Products FAQ
- Topic: Z AXIS BLOCKED in one direction
- Replies: 22
- Views: 61385
Re: Z AXIS BLOCKED in one direction
First you need to make sure z axis is installed well, the rods can move smoothly when you move it by hand. You can release the motors from z axis, then activate the motor in repetier, see how it rotates, you can check if it's the problem of motor, the driver or the motor wire according to the link: ...
- Sun Oct 09, 2016 10:37 am
- Forum: Assembly
- Topic: i3 Acrylic pro B; impossible to mount motor on bed
- Replies: 3
- Views: 8613
Re: i3 Acrylic pro B; impossible to mount motor on bed
Which part is 155mm?
In the instructions you can see you need to use M3X20 screws not M3X16.
In the instructions you can see you need to use M3X20 screws not M3X16.
- Sun Oct 09, 2016 10:03 am
- Forum: Firmware
- Topic: How to install the firmware for GT2560
- Replies: 141
- Views: 651376
Re: How to install the firmware for GT2560
Hi, need Help. :shock: my GT2560 Board will not respond after FW Update with Arduino 1.6.12 How can i recover the board GT 2560 / REV A ? Usaing a Prusa X3 Pro. Have you uploaded the correct firmware? Have it been uploaded successfully? You can reload the firmware for your printer in this link, see...
- Sun Oct 09, 2016 10:00 am
- Forum: Products FAQ
- Topic: Prusa i3 Pro C 2 in 1 out extruder
- Replies: 3
- Views: 6414
Re: Prusa i3 Pro C 2 in 1 out extruder
Hi,
The 2 in 1 out hotend need two extruders to feed the different colors of filament.
Also to get the mixer funtion, you need a GTM32 board to replace the GT2560.
The 2 in 1 out hotend need two extruders to feed the different colors of filament.
Also to get the mixer funtion, you need a GTM32 board to replace the GT2560.
- Fri Sep 30, 2016 12:00 pm
- Forum: Control Board
- Topic: GTM32, GTM32 pro
- Replies: 8
- Views: 15436
Re: GTM32, GTM32 pro
Hi Lami,
Can you inform me of your order number?
Thanks
Can you inform me of your order number?
Thanks
- Fri Sep 30, 2016 11:42 am
- Forum: Others
- Topic: Me Creator 2
- Replies: 26
- Views: 49032
Re: Me Creator 2
Sorry the file is not available.
- Fri Sep 30, 2016 11:33 am
- Forum: Control Board
- Topic: Prusa I3 A Pro Driver Board Not Working
- Replies: 4
- Views: 8783
Re: Prusa I3 A Pro Driver Board Not Working
OPening the box doesn't affect the warranty. You can just open it and check the connection. If all the connection is okay, you can unplug all the drivers and see if the heating problem still exists, if so, then I think there's something wrong with the board, maybe the mosfet is short, you can check ...
- Fri Sep 30, 2016 11:10 am
- Forum: Extruder
- Topic: Problems with temperatures
- Replies: 4
- Views: 7765
Re: Problems with temperatures
Is the printer M201 or other version?
You can try reloading the firmware, see if it will be better.
Download the firmware here:
http://www.geeetech.com/forum/viewtopic ... 20&t=17046
You can try reloading the firmware, see if it will be better.
Download the firmware here:
http://www.geeetech.com/forum/viewtopic ... 20&t=17046
- Fri Sep 30, 2016 11:06 am
- Forum: Firmware
- Topic: Cant upload my firmware
- Replies: 11
- Views: 16753
Re: Cant upload my firmware
You can try the firmware for A pro which uses the LCD12864,
see if it works.
http://www.geeetech.com/forum/download/file.php?id=2100
see if it works.
http://www.geeetech.com/forum/download/file.php?id=2100