Hello, guys, after nearly a month, our flash steal finally come back and please go and vote for those product that you want to see in flash sale, rules are as before , more votes more discount.  

except for this, we have added two new products, ome is the Quadcopter Frame kit, model FE500, FLY-EAGLE.  The other is a power adapter which is mainly used on our 3D printer, the prusa I3, our best seller during the last two month, if you are looking for an affordable 3d printer, our prusa i3 is defilitely the best choice, it is very suitable for students and hobbyiests, you can learn everything about a 3d printer step by step, that will be a worthy experience. oh, BTW,  to know more about our Prusa I3, please check here,

http://www.geeetech.com/specialpage/i3/i3.html

ok, so much for this, let’s move to our new feeds.

New feed NO1,  FE500 Quadcopter Frame kit

Just as important as good electronics, Quadcopter also depends on sturdy, lightweight hulls for mounting components. Frames need to be both strong and stiff, whilst being light enough to hop around in the sky with ease.

This frame is made of carbon nylon which has a great many of physical properties that are perfectly suited to the hobby. The mounting holes design can fit for different controller board e.g. KK, FF, MK, MWC, PIXHAWK, APM2.52 in the RC market; it can fulfill different kind of user need and can be applied for entertainment, aerial photography, FPV and other aeromodelling activities.

Like most Quadcopter frame, this FE500 frame integrates power distribution circuits into the frame plates. Battery connections can be soldered directly to pads built into the material, and power can be tapped at other solder points without the need for extensive, messy wiring. Although by no means essential, a clean setup is satisfying and less likely to fail, making power-distributing frames a worthy investment.

Specifications:

Frame Weight: 300g

Diagonal Wheelbase：500mm

Color: white+ blue

Material：ABS + nylon

For more UAV accessories, please visit  http://www.geeetech.com/uav-uav-accessories-c-75_78.html

New feed NO2,  S-180-12 12V DC power supply

This power adapter is mainly used for Computer project and 3D printers. 

Specification:

AC input voltage range：85-264VAC    47-63Hz

Input current: 11V /1.5A, 230V/0.75A

Output: 12V/ 0-15A

AC inrush current: Cold-start current 20A/115A   40A/230V

Leakage current:  <1MA/240VAC

Dc adjustable range:  +/_10% rated output voltage

Overload protection: 105%-135% hiccup mode, auto-recovery

Over-voltage protection: 115%-135% cut off the output, auto-recovery

Setup, rise, hold up time: 200ms, 50ms, 20ms.

Load regulation: +/_ 1%

Working temperature: -10℃~+60℃, 20%~90RH

Weight/size: 0.58kg, 199x 97x 42mm

if you are looking for the  350W 12V 29A S-350-12  one, please visit  http://www.geeetech.com/350w-12v-29a-s35012-acdc-switching-power-supply-p-715.html

do not forget to vote for your wanted items, bye.