Geeetech has provided at least 6 DIY 3d printer kits for our customers to learn about 3D printing from scratch.

After a long time of use and you have become a master of the printer, you can unleash your creativity to do as many modifications as you like.

Today I would like to share with you some of the best mods and hacks on geeetech prusa I3 pro you do want to miss. These mods and hacks can be used on most of our Prusa I3.

These designs are all created by Luca Benedetto who is a Maker, Designer, and Engineer from Italy.

Let’s take a look at his amazing designs:

1. Underbody of Geeetech prusa I3 pro B.

“The option I’ve taken to block my printer on a wood bed suggests I re-design the underbody protection to put a couple of locking points backmost on the printer.
You can find a couple of alternative components to fit underbody also if you have already installed the Y-Chain, or if you do not desire to install the Y-Chain!” said Luca

Download the files here.

2. control board case

 

Here is the Arduino Box to protect the brain of our printer!
Just before my original customization Geeetech introduced a new mainboard the GT2560, “bigger” and cannot enter in the old Arduino Box, so the new one has been designed to support both boards!

Download the files here

3. Extruder End

The heat of this period led me to restore the previous design of the air duct from the accessory fan, controlled by D9 … the question of artwork with the tilted fan to 45 °, which in its first incarnation was disturbing a hair on the transmission wire problem that this latest version does not have, and it forced me to not turn on the fan before layer 4 because otherwise, I was getting cold to the piece, but given the current temperatures better too cool, you can turn off!

Download the files here 

You can find more amazing designs on his Thingiverse page here http://www.thingiverse.com/Luca_Benedetto/designs/page:2.

If you have any mods and hacks on geeetech 3dprinters, you are welcome to share them with us.