Difference between revisions of "Tiny210 Overview"

Revision as of 02:14, 6 July 2012 (view source) Admin (talk | contribs) (Created page with "Micro2440 development board’s settings and connections == Note == We have installed Linux system which includes three files in accordance with supervivi, zImage_t35/x35/w35...")		Latest revision as of 02:14, 6 July 2012 (view source) Admin (talk | contribs)
Line 1:		Line 1:
−	Micro2440 development board’s settings and connections
−	== Note ==	+	== Overview ==
−	We have installed Linux system which includes three files in accordance with supervivi, zImage_t35/x35/w35 and rootfs-qtopia-qt4.img in CD-ROM by default if the customer didn’t specify which system to be installed. <br>	+	[[File:Tiny210overview.jpg]]
		+	* 1GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
		+	* 512MB DDR2 RAM and 1GB NAND Flash
		+	* LCD/Touch Screen, HDMI,TV out, Audio support
		+	* TF card, USB Host/OTG support
		+	* Ethernet, WiFi, serial port, GPIO
		+	* Contain CPU board
		+	* Linux 2.6.35 & Android 2.3 support
−	The operation below is based on WinXP environment. Supervivi-64M included in CD-ROM should be applied to 64M Micro2440, supervivi-128M should be applied to 128M/256M/512M/1GB Micro2440.	+	== CPU board Hardware info ==
		+	[[File:Cpu top.jpg]] [[File:Cpu bottom.jpg]]
−	==External connection==	+	'''CPU''': 1 GHz Samsung [http://www.geeetech.com/1g-tiny210-sds5pv210-cortexa8-7-tft-lcd-sdk-p-422.html S5PV210] with PowerVR SGX540 graphics engine<br>
−	*Please use the direct serial port cable we provide to connect serial port 0 on Micro2440 with PC serial port.	+	'''DDR2 RAM''': 512MB DDR2 RAM, 32bit data bus, 200MHz<br>
−	*Please use the crossed network cable we provide to connect network interface on Micro2440 with PC	+	'''FLASH''': SLC NAND Flash: 256MB/1GB
−	*Please use the 5V power adapter we provide to connect the power jack on Micro2440
−	*Please plug the headphone or speaker jack in the audio output socket (green).
−	*If you have a LCD display, please connect it to LCD interface on Micro2440 following the direct of the dataline.
−	*Please use USB cable to connect Micro2440 with PC.
−	==Startup mode selection==	+	'''Multi-IO''':
−	The startup mode of Micro2440 is chosen by toggle switch S2. <br>	+	2 x 60 Pin 2.0mm space DIP connector<br>
−	S2 is toggled to Nor Flash, the system will boot from Nor Flash. <br>	+	1 x 30 Pin 2.0mm space DIP connector<br>
−	S2 is toggled to Nand Flash, the system will boot from Nand Flash. <br>	+	1 x 51 Pin 1.0mm space SMD connector
−	==Hyper terminal setting==	+	'''on Board''':
−	Note: Some customers use USB-RS232 cable to expand Serial port, please note that a few USB-RS232 cables will result in error code because of its poor quality. Our customers could contact with our sales agents to buy the cable available they provide. <br>	+	HDMI interface
		+	4 x User Leds(Green)<br>
		+	1 x Power Led(Red)<br>
		+	Supply Voltage from 2V to 6V
−	In addition, please make sure to use the accessory direct serial port cable, perhaps other cable may not work. <br>	+	'''Mechanical''': Dimension: 64x 50x 11mm
−	We must use a terminal application or similar to communicate with development board via serial port. The HyperTerminal included with Windows XP is in common use. Usually the Linux for desktop also carry the similar serial terminal application called minicom based on the command line. <br>	+	'''Software''': Android 4.0, Android 2.3, Linux 2.6.35, Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
−	Here we focus on the HyperTerminal included with Windows XP. HyperTerminal is usually located in “Start>Programs>Accessories>Communications”. Run this application, then the following dialog box appears, click “Cancel”.	+	== Tiny210 Motherboard ==
		+	[[File:Tiny210motherboard.png]]
		+	# Integrated USB 2.0 Hub: Extended 4 USB host ports, three of them as the standard side port,and one was lead by SCON interface
		+	# AV CCD Camera In: Integrated TVP5150 video chip: 2 AV input port (RCA), can be directly connected using a CCD camera
		+	# RS485: 1 RS485 interface
		+	# Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level
		+	# keys: 8 key
		+	# RJ45 Ethernet port: using DM9000AEP, 10/100M adaptive
		+	# Audio input and output: using the WM8960 professional audio chip, containing Class D amplifier on-board microphone, and supports HDMI audio and video synchronization output
		+	# USB Slave: 1 Road, the USB 2.0 specification
		+	# Infrared receiver: 1
		+	# ADC input: 6 ADC input
		+	# Buzzer: 1, control by the PWM0
		+	# EEPROM:AT24C08 (256 Byte) for I2C test
		+	# LCD Interface: 2 LCD interface, both 40 Pin 0.5mm Pitch Chip Block, support 3.5 "-19" full color TFT display LCD
		+	# SDIO interface: used to connect the SDWiFi module and other
		+	# CMOS Camera interface: used to connect CMOS camera
		+	# RTC clock: with a backup battery (according to different regions or time periods, mailing may remove the battery)
		+	# PCB layer: 2
		+	# PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch LCD module
		+	# Power supply: DC-5V
−	[[File:2440setting 1.jpg]]	+	== Software ==
		+	'''Linux&Android 2.3'''
		+	*Boot loader
		+	verison: Superboot-210<br>
		+	Function: support boot and update system by TF-card(superboot)
		+	*Linux kernel
		+	verison: Linux-2.6.35<br>
		+	Compile: arm-linux-gcc-4.5.1-v6-vfp
		+	*Device Driver
		+	TFT LCD/Touchscreen, HDMI, Audio OUT, MMC/SD card, NET, Serial port, watchdog,RTC, keyboard<br>
		+	WIFI, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3Gdriver
		+	*File Systemsupport
		+	Ubi filesystem, yaffs, ext2/3,
		+	*Function use example
		+	Ethernet, Support DHCP, Audio in/out, SD WiFi support, HDMI support<br>
		+	OMS Camera support, 3G support(WCDMA, CDMA2000)<br>
		+	USB Disk support, USB Bluetooth support, Switch horizontal and vertical screen<br>
		+	Dynamic Wallpapers
−	Next click “Yes” in the popup window.
−	[[File:2440setting 2.jpg]]
−	[[File:2440setting 3.jpg]]	+	'''Linux'''
		+	*Boot loader
		+	verison: Superboot-210<br>
		+	Function: support boot and update system by TF-card(superboot)
		+	*Linux kernel
		+	verison: Linux-2.6.35<br>
		+	Compile: arm-linux-gcc-4.5.1-v6-vfp
		+	*Device Driver
		+	TFT LCD/Touchscreen, HDMI, Audio OUT, MMC/SD card, NET, Serial port, watchdog,RTC, keyboard<br>
		+	WIFI, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3Gdriver<br>
		+	*File Systemsupport
		+	Ubi filesystem, yaffs, ext2/3
		+	*Graphics system
		+	Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
−	HyperTerminal will ask you to name the new connection and we name it “ttys0”, Windows XP prohibit you from naming it “COM1” or similar due to the name has been occupied by system.	+	[[File:Sys overview1.jpg|500px]][[File:Sys overview2.jpg|500px]]
−	[[File:2440setting 4.jpg]]	+	== How to buy ==
−		+	[http://www.geeetech.com/1g-tiny210-sds5pv210-cortexa8-7-tft-lcd-sdk-p-422.html Tiny 210]
−	After that another dialog box pop up again, you need to specify the serial port of the development board and we specify “COM1” as shown.
−
−	[[File:2440setting 5.jpg]]
−
−	Finally, the most important thing is to set serial port. Note that the Flow control must be specified as none, or you will see the data output and no data input. The serial baud rate must set at 115200.
−
−	[[File:2440setting 6.jpg]]
−
−	After all setting is complete, switch on the power supply and the HyperTerminal shows the vivi startup, then select ”File>Save as” in HyperTerminal to save the connection settings so as to use it next time.
−
−	[[File:2440setting 7.jpg]]

---

Latest revision as of 02:14, 6 July 2012

Overview

• 1GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
• 512MB DDR2 RAM and 1GB NAND Flash
• LCD/Touch Screen, HDMI,TV out, Audio support
• TF card, USB Host/OTG support
• Ethernet, WiFi, serial port, GPIO
• Contain CPU board
• Linux 2.6.35 & Android 2.3 support

CPU board Hardware info

CPU: 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
DDR2 RAM: 512MB DDR2 RAM, 32bit data bus, 200MHz
FLASH: SLC NAND Flash: 256MB/1GB

Multi-IO: 2 x 60 Pin 2.0mm space DIP connector
1 x 30 Pin 2.0mm space DIP connector
1 x 51 Pin 1.0mm space SMD connector

on Board: HDMI interface 4 x User Leds(Green)
1 x Power Led(Red)
Supply Voltage from 2V to 6V

Mechanical: Dimension: 64x 50x 11mm

Software: Android 4.0, Android 2.3, Linux 2.6.35, Qtopia-2.2.0/Qt-4.4.3/Qt-4.7

Tiny210 Motherboard

1. Integrated USB 2.0 Hub: Extended 4 USB host ports, three of them as the standard side port,and one was lead by SCON interface
2. AV CCD Camera In: Integrated TVP5150 video chip: 2 AV input port (RCA), can be directly connected using a CCD camera
3. RS485: 1 RS485 interface
4. Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level
5. keys: 8 key
6. RJ45 Ethernet port: using DM9000AEP, 10/100M adaptive
7. Audio input and output: using the WM8960 professional audio chip, containing Class D amplifier on-board microphone, and supports HDMI audio and video synchronization output
8. USB Slave: 1 Road, the USB 2.0 specification
9. Infrared receiver: 1
10. ADC input: 6 ADC input
11. Buzzer: 1, control by the PWM0
12. EEPROM:AT24C08 (256 Byte) for I2C test
13. LCD Interface: 2 LCD interface, both 40 Pin 0.5mm Pitch Chip Block, support 3.5 "-19" full color TFT display LCD
14. SDIO interface: used to connect the SDWiFi module and other
15. CMOS Camera interface: used to connect CMOS camera
16. RTC clock: with a backup battery (according to different regions or time periods, mailing may remove the battery)
17. PCB layer: 2
18. PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch LCD module
19. Power supply: DC-5V

Software

Linux&Android 2.3

• Boot loader

verison: Superboot-210
Function: support boot and update system by TF-card(superboot)

• Linux kernel

verison: Linux-2.6.35
Compile: arm-linux-gcc-4.5.1-v6-vfp

• Device Driver

TFT LCD/Touchscreen, HDMI, Audio OUT, MMC/SD card, NET, Serial port, watchdog,RTC, keyboard
WIFI, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3Gdriver

• File Systemsupport

Ubi filesystem, yaffs, ext2/3,

• Function use example

Ethernet, Support DHCP, Audio in/out, SD WiFi support, HDMI support
OMS Camera support, 3G support(WCDMA, CDMA2000)
USB Disk support, USB Bluetooth support, Switch horizontal and vertical screen
Dynamic Wallpapers

Linux

• Boot loader

verison: Superboot-210
Function: support boot and update system by TF-card(superboot)

• Linux kernel

verison: Linux-2.6.35
Compile: arm-linux-gcc-4.5.1-v6-vfp

• Device Driver

TFT LCD/Touchscreen, HDMI, Audio OUT, MMC/SD card, NET, Serial port, watchdog,RTC, keyboard
WIFI, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3Gdriver

• File Systemsupport

Ubi filesystem, yaffs, ext2/3

• Graphics system

Qtopia-2.2.0/Qt-4.4.3/Qt-4.7

How to buy

Tiny 210