Opto-isolator Breakout

From Geeetech Wiki
Revision as of 06:57, 19 January 2013 by Admin (talk | contribs) (introduction)

Jump to: navigation, search

introduction

Opto-isolator Breakout09118.jpg

This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system.

This board electrically isolates a controller from the high-power system by use of an opto-isolator IC. This IC has two LEDs and two photodiodes built-in.

This allows the low-voltage side to control a high voltage side.

Features

  • Two channel coupler
  • SOIC-8 surface mountable package
  • Standard lead spacing of 0.05"
  • Available only on tape and reel option(conforms to EIA standard 481-2)
  • Isolation test voltage, 4000 VRMS
  • Compatible with dual wave, vapor phase andIR reflow soldering
  • Lead (Pb)-free component
  • Component in accordance to RoHS 2002/95/EC andWEEE 2002/96/EC