Opto-isolator Breakout
From Geeetech Wiki
Revision as of 06:53, 19 January 2013 by Admin (talk | contribs) (Created page with "==introduction== Opto-isolator Breakout09118.jpg This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontrol...")
introduction
Opto-isolator Breakout09118.jpg
This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system.
This board electrically isolates a controller from the high-power system by use of an opto-isolator IC. This IC has two LEDs and two photodiodes built-in.
This allows the low-voltage side to control a high voltage side.
Features
- Two channel coupler
- SOIC-8 surface mountable package
- Standard lead spacing of 0.05"
- Available only on tape and reel option(conforms to EIA standard 481-2)
- Isolation test voltage, 4000 VRMS
- Compatible with dual wave, vapor phase andIR reflow soldering
- Lead (Pb)-free component
- Component in accordance to RoHS 2002/95/EC andWEEE 2002/96/EC
