LilyPad Temperature Sensor

From Geeetech Wiki
Revision as of 01:02, 28 August 2015 by Admin (talk | contribs) (USE)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Overview

08777-04.jpg 08777-03.jpg


Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C,

0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the local ambient temperature.

Detect physical touch based on body heat and ambient conditions with this small sensor.


Download

FIDI driver


USE

1.Connect Uno and LilyPad Temperature Sensor like as:

Uno ------ LilyPad Temperature Sensor

5V -------- +

GND ------- -

A0 -------- S


2.Upload the code

float temp;

void setup() {

Serial.begin(57600);

};


void loop () {

temp = analogRead(0)*5/1024.0;

temp = temp - 0.5;

temp = temp / 0.01;

Serial.println(temp);

delay(500);

};


3.Open the monitor


20130916170043.png

How to get

Click here to buy: http://www.geeetech.com/lilypad-temperature-sensor-p-736.html