Geeetech Mizar S 3D Printer

From Geeetech Wiki
Revision as of 03:14, 4 January 2023 by Admin (talk | contribs) (How to replace a hotend)

Jump to: navigation, search

Introduction

Product details

Unpacking and proper handling

Slicing

Printer maintenance

How to replace a hotend

Tools necessary for this guide
Wrench size 10 mm

Allen keys – 1.5/2/2.5/3 mm

Flat screwdriver tip width 2.5 mm

Diagonal pliers

Electrical tape

Zip ties

Craft knife or equivalent


Step 1 Preparing


Mizars002.png

Preheat the nozzle to 220 Celsius from the LCD menu.

Unload the filament from the hotend.

Remove the Teflon tube from the hotend.

Turn the printer off and unplug it from the socket!

How to clean the hotend and replace a nozzle

Tools necessary for this guide
Tweezers for nozzle

Wrench size 6/10/20 mm

Cleaner rod (1.5mm diameter, 100mm length)

Needle for nozzle

Allen key - 2 mm

How to replace a control board

Tools necessary for this guide
Allen keys – 2.5/3 mm

Flat screwdriver tip width 2.5 mm

How to replace PSU

Tools necessary for this guide
Allen keys - 2.5/3 mm

Philips screwdriver for PSU cables

How to replace a hotbed

Tools necessary for this guide
Allen keys – 3 mm

Flat screwdriver tip width 2.5 mm

Diagonal pilers

Zip ties

How to replace a screen

Tools necessary for this guide
Allen keys - 2.5/3 mm