Difference between revisions of "Geeetech Mizar S 3D Printer"

Revision as of 02:57, 4 January 2023

Tools necessary for this guide
Wrench size 10 mm Allen keys – 1.5/2/2.5/3 mm Flat screwdriver tip width 2.5 mm Diagonal pliers Electrical tape Zip ties Craft knife or equivalent

Step 1 Preparing

Preheat the nozzle to 220 Celsius from the LCD menu.

Unload the filament from the hotend.

Remove the Teflon tube from the hotend._{Subscript text}

Turn the printer off and unplug it from the socket!

Tools necessary for this guide
Tweezers for nozzle Wrench size 6/10/20 mm Cleaner rod (1.5mm diameter, 100mm length) Needle for nozzle Allen key - 2 mm

Tools necessary for this guide
Allen keys – 2.5/3 mm Flat screwdriver tip width 2.5 mm

Tools necessary for this guide
Allen keys - 2.5/3 mm Philips screwdriver for PSU cables

Tools necessary for this guide
Allen keys – 3 mm Flat screwdriver tip width 2.5 mm Diagonal pilers Zip ties

Tools necessary for this guide
Allen keys - 2.5/3 mm

@@ Line 34: / Line 34: @@
 Craft knife or equivalent
 |}
+'''Step 1 Preparing'''
+Preheat the nozzle to 220 Celsius from the LCD menu.
+Unload the filament from the hotend.
+Remove the Teflon tube from the hotend.<sub>Subscript text</sub>
+Turn the printer off and unplug it from the socket!
 === '''How to clean the hotend and replace a nozzle'''===