Difference between revisions of "Geeetech Mizar S 3D Printer"

From Geeetech Wiki
Jump to: navigation, search
(How to replace a hotend)
(How to replace a hotend)
Line 54: Line 54:
 
'''Step 2 Disassembling the hotend'''
 
'''Step 2 Disassembling the hotend'''
  
 +
 +
[[File:Mizars003.png]]
  
 
Remove the hotend housing.
 
Remove the hotend housing.
  
 
Disconnect the hotend thermistor.
 
Disconnect the hotend thermistor.
 +
 +
 +
[[File:Mizars004.png]]
  
 
Release and remove the two screws that secure the hotend.
 
Release and remove the two screws that secure the hotend.
  
 
Remove the cables on the extension board.
 
Remove the cables on the extension board.
 +
 +
 +
[[File:Mizars005.png]]
 +
 +
[[File:Mizars006.png]]
 +
 +
[[File:Mizars007.png]]
  
 
Remove the extension board and the part cooling fan.
 
Remove the extension board and the part cooling fan.

Revision as of 03:47, 4 January 2023

Introduction

Product details

Unpacking and proper handling

Slicing

Printer maintenance

How to replace a hotend

Tools necessary for this guide
Wrench size 10 mm

Allen keys – 1.5/2/2.5/3 mm

Flat screwdriver tip width 2.5 mm

Diagonal pliers

Electrical tape

Zip ties

Craft knife or equivalent


Step 1 Preparing


Mizars002.png

Preheat the nozzle to 220 Celsius from the LCD menu.

Unload the filament from the hotend.

Remove the Teflon tube from the hotend.

Turn the printer off and unplug it from the socket!


Step 2 Disassembling the hotend


Mizars003.png

Remove the hotend housing.

Disconnect the hotend thermistor.


Mizars004.png

Release and remove the two screws that secure the hotend.

Remove the cables on the extension board.


Mizars005.png

Mizars006.png

Mizars007.png

Remove the extension board and the part cooling fan.

Remove the strain gauge.


Step 3 Disconnecting the hotend cables


Remove the bottom cover and disconnect the cooling fan.

Disconnect the heater cartridge.

Cut the zip ties.

Cut off the heat-shrink tubing from the connection wire. Avoid cutting the cable.

Remove the old heater cartridge.

How to clean the hotend and replace a nozzle

Tools necessary for this guide
Tweezers for nozzle

Wrench size 6/10/20 mm

Cleaner rod (1.5mm diameter, 100mm length)

Needle for nozzle

Allen key - 2 mm

How to replace a control board

Tools necessary for this guide
Allen keys – 2.5/3 mm

Flat screwdriver tip width 2.5 mm

How to replace PSU

Tools necessary for this guide
Allen keys - 2.5/3 mm

Philips screwdriver for PSU cables

How to replace a hotbed

Tools necessary for this guide
Allen keys – 3 mm

Flat screwdriver tip width 2.5 mm

Diagonal pilers

Zip ties

How to replace a screen

Tools necessary for this guide
Allen keys - 2.5/3 mm