Difference between revisions of "Geeetech B30 3D Printer"

From Geeetech Wiki
Jump to: navigation, search
(Feature)
(Feature)
Line 31: Line 31:
 
The whole frame is built in black and white, imparting its unique noble temperament. The touch screen and Geeetech logo at the racetrack-shaped area is in harmony with the design of the extruder and the whole frame. The Backlight Notification, a considerable add-on, could show the printing status of B30 in time. Its overall appearance renders this new device appealing at the first sight.  
 
The whole frame is built in black and white, imparting its unique noble temperament. The touch screen and Geeetech logo at the racetrack-shaped area is in harmony with the design of the extruder and the whole frame. The Backlight Notification, a considerable add-on, could show the printing status of B30 in time. Its overall appearance renders this new device appealing at the first sight.  
  
 +
[[File:B30 02.jpg]]
  
 
2. Easy to Assemble  
 
2. Easy to Assemble  
  
 
To save the building efforts on your part, B30 is designed highly modularized. The main components could be put together within minutes.
 
To save the building efforts on your part, B30 is designed highly modularized. The main components could be put together within minutes.
 +
 +
[[File:B30 03.jpg]]
  
 
3. Strong & Stable  
 
3. Strong & Stable  
  
 
Made from sheet metal, B30 runs stably, totally getting rid of failed printing caused by vibration. Besides, the power supply unit, control board and wires are enclosed at the bottom of the machine, which helps to reduce unnecessary dangers, lower the gravity center and further stabilize the whole machine.
 
Made from sheet metal, B30 runs stably, totally getting rid of failed printing caused by vibration. Besides, the power supply unit, control board and wires are enclosed at the bottom of the machine, which helps to reduce unnecessary dangers, lower the gravity center and further stabilize the whole machine.
 +
 +
[[File:B30 04.jpg]]
  
 
4.High Printing Precision
 
4.High Printing Precision
  
B30 keeps the same high printing precision of 80-110 mm/s as its predecessors. Able to deliver prints with smooth surface, clear angle, sleek contour and sturdy structure.  
+
B30 keeps the same high printing precision of 0.05-0.3mm as its predecessors. Able to deliver prints with smooth surface, clear angle, sleek contour and sturdy structure.  
  
 
5.Ultra-Fast Printing Speed
 
5.Ultra-Fast Printing Speed

Revision as of 03:59, 27 January 2018

Introduction

Geeetech B30, a fully-featured new 3D printer, is worthy of the name “The beast behind the beauty”. Pursuing simplicity and gentility, B30 prints 2-3 times faster than the average printers, without sacrificing the printing quality and mechanical performance.

B30 01.jpg

The whole frame is built in black and white, imparting its unique noble temperament. The touch screen and Geeetech logo at the racetrack-shaped area is in harmony with the design of the extruder and the whole frame. The backlight Notification, a considerable add-on, could show the printing status of B30 in time. Its overall appearance renders this new device appealing at the first sight.

B30 02.jpg

B30 is highly modularized and the main components could be put together within minutes. Made from sheet metal, B30 runs stably, totally getting rid of failed printing caused by vibration. The power supply unit, control board and wires are enclosed at the bottom of the machine, which helps to reduce unnecessary dangers, lower the gravity center and further stabilize the whole machine.

B30 04.jpg

This new machine, with its build volume of 320*320*350mm, provides enough room for you to unleash your creativity and turn abstract models into palpable items. The layer resolution is up to 0.05mm, which could ensure that the printer delivers items with nice layer adhesion, smooth surface finish and solid structure. Besides, the extruder is of remote style, ensuring that the printing head could move quickly, accurately and stably.

B30 09.jpg

B30 adopts a 3D touch to auto level and calibrate the hotbed. This kind of leveling method seems easier and more effective than the auxiliary one. The 3.2″ full-color touch screen, intuitive and easy-to-manage, empowers you to take control of the printer at your fingertips. With a few clicks, it is straightforward to modify the relevant parameters, select a model from TF card and start to print.

Its break-resuming capability and filament detector make B30 more considerate enough to enhancing your printing experience. The former helps you to stop the machine and save the real-time printing status when the power fails, and allows you to assume the unfinished print next time. The latter would notify you of changing filament in time in case the printing material runs out.

In addition, B30 could be controlled by TF card, Wi-Fi enabled EasyPrint 3D App and our self-developed printing and control software EasyPrint 3D.

B20 could print with an assortment of filaments, including ABS, PLA, Nylon, wood polymers, etc. Hence add much more joys to your printing.

Feature

1. Simple & Noble

The whole frame is built in black and white, imparting its unique noble temperament. The touch screen and Geeetech logo at the racetrack-shaped area is in harmony with the design of the extruder and the whole frame. The Backlight Notification, a considerable add-on, could show the printing status of B30 in time. Its overall appearance renders this new device appealing at the first sight.

B30 02.jpg

2. Easy to Assemble

To save the building efforts on your part, B30 is designed highly modularized. The main components could be put together within minutes.

B30 03.jpg

3. Strong & Stable

Made from sheet metal, B30 runs stably, totally getting rid of failed printing caused by vibration. Besides, the power supply unit, control board and wires are enclosed at the bottom of the machine, which helps to reduce unnecessary dangers, lower the gravity center and further stabilize the whole machine.

B30 04.jpg

4.High Printing Precision

B30 keeps the same high printing precision of 0.05-0.3mm as its predecessors. Able to deliver prints with smooth surface, clear angle, sleek contour and sturdy structure.

5.Ultra-Fast Printing Speed

Using high-performance steppers, B30 prints 2-3 times faster than the average printers, without sacrificing the printing quality and mechanical performance.

Printing at the same high speed

B30 extrudes smoothly, delivering fine and exquisite surface finish and clear curves.

However, the ordinary printers are prone to missing steps and the prints are coarse and have severe errors in each layer.

6.Better adhesion

a. Silicon carbide glass with microporous coating b. No need to attach masking tape c. High chemical stability, uniform heating and good wear-resistance d. Microporous coating: inorganic, a hardness of 8 Mohs and high durability e. Better adhesion and flatness and easy to take prints off f. Easy to clean with water or alcohol


7. Cloud-based EasyPrint 3D App

EasyPrint 3D App comes fully featured.

A cloud gallery of 50,000 free 3D models, cloud slicer, BUZZ, compatible with different 3D printers, remote control over multiple printers and instant notifications. Complete with these 6 user-oriented characteristics, EasyPrint 3D would assist you in exploring the cloud 3D printing era.

Cloud Gallery

A total of 50,000 FREE 3D models, covering 9 categories, are ready for you to enjoy an amazing 3D printing feast. Practical, fantastic & convenient.


Cloud Slicer

You just need to scroll through the gallery, choose your favorite and complete simple setting. EasyPrint 3D will autonomously take over the seemingly sophisticated slicing job. Cloud 3D printer is really on your palm.


Buzz

---share & news feed---

After finishing your print, even a simple gadget, nothing is more thrilling than sharing it at once.

EasyPrint 3D totally reads your mind!

SHARE your unique work with worldwide friends via a swipe of fingers.

Get to know the latest industry news, practical articles and videos, interesting contests, discounts, contests, etc.

Remote Control

EasyPrint 3D allows you to adjust the printing speed, fan speed, heatbed and extruder temperature, etc. anywhere and anytime. Totally help you say goodbye to a printer-sitter.

8. 3.2″full-color touch screen

The full color touch screen has responsive UI and orderly operation flow by which you could modify the relevant printing parameters with ease and take full control over your printing job.

9. Break-resuming Capability

The break-resuming capacity, a resurrection system, is added to save real-time printing status and resume the printing job exactly at the same place where it has been stopped.

This add-on totally drives away the hassle of repetitive and time-consuming printing jobs caused by unexpected power outage. Totally get you out of worries about printing large-size 3D models.

10. Filament Detector

Filament detector kills the pain caused by filament outage or fracture. The detecting system would alert you to change filament in case the printer would run in air or the spool is empty.

This add-on would, in a large measure, avoid bootless printing as well as enhancing your printing satisfaction.

11. SD Card Stand-alone Printing

B30 could print stand-alone with a tiny TF card. You just need to choose a 3D model file from SD card, set the relevant printing parameters and start to print. Explore the fabulous 3D printing world with a swipe of your fingers!

12. Software Resources

 Self-developed EasyPrint 3D

EasyPrint 3D, specially engineered 3D printing software for Geeetech 3D printer, is easy to use for both novices and seasoned users. You could choose the [Quick] mode and [Custom] mode according to your printing experience. Besides, the [Manual control] function allows users to manually modify some specific printing settings.

 On-line Firmware Upgrade

With EasyPrint 3D, it is straight-forward and convenient to upgrade the firmware of your printer on-line. We will constantly upload the latest firmware to ensure that your printer could keep running at peak performance and bring you satisfactory using experience.


13. Open Filament System

B30 is compatible with a wide range of filaments, covering PLA, ABS, nylon, flexible PLA, wood polymers, etc. Different colors and texture give you innumerable possibilities to explore the fantastic 3D printing world.

14. Certifications

B30 has obtained the relevant certificated for its international safety, such as CE, FCC, PSE, etc.

Specifications

Gallery

Video

Document

Software

FAQ