Arduino IR Remote Control

Introduction

The new ultra-thin 38K universal infrared remote control, NEC encoding format 1-21-key remote control, USB port stereo, car MP3, foot bath, lighting, digital photo frame, microcontroller development board, learning board, etc..

Feature

• Remote control distance: more than 8 meters
• Launch tube infrared wavelength: 940Nm
• Crystal: the oscillation frequency of 455 KHz
• IR carrier frequency: 38KHz
• Encoding: the encoding format of the NEC, upd6122 encoding scheme, the user code 00FF, key coding below picture
• Size: 86 * 40 * 6mm
• Frequency: 38K
• Power supply: CR2025/160mAH
• Button: free height is less than 3mm, the force 200-350g, the life of more than 200 000

Document

IR Reomote library

Usage

You need a IR receiving breakout to detect the IR signal and decodes it as HEX code, then dispaly it on the serial monitor.

 S  -> D11
VCC -> 5V
GND -> GND

Example code

#include <IRremote.h>
int RECV_PIN = 11; //define input pin on Arduino
IRrecv irrecv(RECV_PIN);
decode_results results;
void setup()
{
Serial.begin(9600);
irrecv.enableIRIn(); // Start the receiver
}
void loop() {
if (irrecv.decode(&results)) {
  Serial.println(results.value, HEX);
  irrecv.resume(); // Receive the next value
}
}

How to buy

Click here to buy [Arduino IR Remote Control]